
Solarinverter
cpipero/solarinverter
Kicad Project to build a programmable Solar Inverter

This repository contains a KiCad project with a hardware reference implementation for the OpenLST. This design is a simplified version of the Texas Instruments CC1110 432 MHz reference design.
Openlst hw is an open-source printed circuit board by AlexFWulff, from the AlexFWulff/HarvardSatelliteGroundstation repository on GitHub. It is a 4-layer board of 60 × 50 mm with 175 parts on 75 nets, routed with 690 tracks and 125 vias.
It is built around the PE4259-63, LM1117-3.3 and STPS340U. Its parts include 34 resistors, 30 capacitors, 8 ICs, 6 connectors and 5 inductors.
This repository contains a KiCad project with a hardware reference implementation for the OpenLST. This design is a simplified version of the Texas Instruments CC1110 432 MHz reference design. A 1 watt power amplifier module has been added to increase operating range. The design is intended for use at 437 MHz, however, it may be modified for use at other frequencies.
The user is responsible for obtaining and maintaining the necessary license to operate this radio. The example project uses frequencies in the US Amateur Radio UHF band. Transmissions in this band require a valid FCC license and compliance with CFR Part 97.

This repository contains the following items:
Copyright 2018 Planet Labs Inc. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
This document may contain technology or software the export of which is or may be restricted by the Export Administration Act and the Export Administration Regulations (EAR), 15 C.F.R. parts 730-774. Diversion contrary to U.S. law is prohibited.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100 | archive:R_0603_1608Metric | R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R17 |
| 10 | 0.1u | archive:C_0603_1608Metric | C1, C3, C5, C6, C8, C10, C15, C26, C27, C31 |
| 8 | DNI | archive:R_0603_1608Metric | R15, R19, R20, R25, R29, R30, R31, R32 |
| 7 | 1K | archive:R_0603_1608Metric | R1, R2, R3, R4, R18, R26, R28 |
| 7 | 220p | archive:C_0402_1005Metric | C2, C7, C21, C25, C38, C39, C45 |
| 4 | 10u | archive:C_0603_1608Metric | C4, C13, C18, C20 |
| 4 | 1u | archive:C_0603_1608Metric | C9, C44, C46, C47 |
| 4 | M3_Hole | archive:MountingHole_3.2mm_M3_Pad_Via | MK1, MK2, MK3, MK4 |
| 3 | 33K | archive:R_0603_1608Metric | R21, R23, R27 |
| 2 | 10K | archive:R_0603_1608Metric | R22, R24 |
| 2 | 1n | archive:C_0603_1608Metric | C19, C22 |
| 2 | 27n | archive:L_0402_1005Metric | L5, L6 |
| 2 | 3.9p | archive:C_0402_1005Metric | C23, C24 |
| 2 | LED | archive:LED_0603_1608Metric | D1, D2 |
| 2 | Z=1k @ 100M | archive:L_0603_1608Metric | L3, L8 |
| 1 | 100u | archive:CP_EIA-3528-15_AVX-H | C14 |
| 1 | 3K3 | archive:R_0603_1608Metric | R37 |
| 1 | 56K | archive:R_0603_1608Metric | R16 |
| 1 | 5K6 | archive:R_0603_1608Metric | R36 |
| 1 | 5VDC | archive:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | ANT | archive:SMA_Molex_73251-1153_EdgeMount_Horizontal | J6 |
| 1 | CC Prog/Debug | archive:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | CC1110 | openlst:TI_CC_QFN36 | U2 |
| 1 | Control Outputs | archive:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | FOX924 27MHz | archive:Oscillator_SMD_Fordahl_DFAS15-4Pin_5.0x3.2mm | U4 |
| 1 | LM1117-3.3 | archive:SOT-223-3_TabPin2 | U1 |
| 1 | LT1086-3.6 | archive:TO-263-3_TabPin2 | U3 |
| 1 | PE4259 | archive:SOT-363_SC-70-6 | U6 |
| 1 | RFFM6403 | openlst:Qorvo_LGA_28_ThermalVias | U9 |
| 1 | STA1120A | openlst:SF2136E | U8 |
| 1 | STPS340U | archive:D_SMB | D3 |
| 1 | TLV803S | archive:SOT-23 | U5 |
| 1 | UART0 | archive:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | UART1 | archive:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Z=500 @ 100M | archive:L_1206_3216Metric | L2 |
The 90 most common of 175 parts.

cpipero/solarinverter
Kicad Project to build a programmable Solar Inverter


TheColonelYoung/Arachne
Mainly 3D printed manipulator with 6 axis of freedom based on design of steward platform
Virtex7/APRS-Tracker
APRS-Sender in Leichtbauweise für Modellflieger oder Modellfahrzeuge

Tynogc/PickAndPlace_Electronic
The Electronic-Side of an automatic SMT Pick&Place-System



softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.
It measures 60 × 50 mm and has 4 copper layers, 1.6 mm thick.
175 parts, built around the PE4259-63, LM1117-3.3 and STPS340U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AlexFWulff/HarvardSatelliteGroundstation repository on GitHub, at the commit this page was made from: the board is OpenLST-HW-Modified/openlst-hw.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AlexFWulff before reusing the design.