2 layers278 × 135 mm
2 layers38 × 109.8 mm
AVIONICS PCB
AlexBerryhill/Rocket-Avionics-Control-BoardSkys the Limit
- Size
- 38 × 109.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 49
- Pads
- 113
- Tracks, vias
- 111, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Jan 2025
- Updated
- 7 Apr 2025
Overview
AVIONICS PCB is an open-source printed circuit board by AlexBerryhill, from the AlexBerryhill/Rocket-Avionics-Control-Board repository on GitHub. It is a 2-layer board of 38 × 109.8 mm with 23 parts on 49 nets, routed with 111 tracks and 0 vias.
It is built around the ESP32-S3-DEVKITC-1-N8, MMBT2222ALT1G-CN and LD1117V33, with the XT30PW-M among its other parts. Its parts include 7 connectors, 5 capacitors, 3 ICs and 2 resistors. It belongs with the ESP32 boards of this library.
Main components
4
ESP32-S3-DEVKITC-1-N8
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
MMBT2222ALT1G-CN
SOT-23SOT-23 Bipolar (BJT) ROHSChipNoboBipolar (BJT)
LD1117V33
TO-2200℃~+125℃@(Tj) 1 1.2V@(800mA) 100uV 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal Shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
XT30PW-M
-- Power connector / plug connector ROHSChangzhou Amass ElecUncategorised
README
README.mdRocket Avionics Control Board
Skys the Limit
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5 |
| 4 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J4, J5, J6, J7 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | ALTITUDE1, GPS1 |
| 2 | MMBT2222ALT1G | SamacSys_Parts:SOT96P237X111-3N | IC1, IC2 |
| 2 | R_US | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2, J3 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | SD_READER1 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | ACCELEROMETER1 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U1 |
| 1 | LD1117V33 | LD1117V33:TO-220_STM | CR1 |
| 1 | LOGO | LOGO | G*** |
| 1 | XT30PW-M | XT30PW-M:AMASS_XT30PW-M | J1 |
Similar boards
- 2 layers83.5 × 66 mm
Open ed Rev.B
krikzz/open-ed
Open-ED is a very simple and cheap open source Genesis/Megadrive cartridge. The cartridge does not have its own processor or FPGA, it is built in the old school style using only memory and discrete logic.
82 parts169MIT - 2 layers48.3 × 41.9 mm
LPM013M126C breakout
testudor/LPM013M126C-breakout
A breakout board for the LPM013M126C MIP display from JDI
19 parts12 - 4 layers65 × 52 mm
ProtogenControllerV1
coelacant1/Protogen-Electronics
SmartMatrix SmartLED Shield breakout for Protogen hardware
77 parts8GPL-3.0 - 2 layers17.8 × 27.9 mm
- 2 layers162 × 90 mm
- 2 layers71.4 × 99.7 mm
RP2350A Macropad
arkandas/rp2350-macropad
RP2350A 3x3 mechanical macropad with a browser-programmable keymap and an on-board status LCD
85 partsMIT - 2 layers
Questions
How big is the AVIONICS PCB PCB?
It measures 38 × 109.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AVIONICS PCB use?
23 parts, built around the ESP32-S3-DEVKITC-1-N8, MMBT2222ALT1G-CN, LD1117V33 and XT30PW-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AVIONICS PCB KiCad files?
From the AlexBerryhill/Rocket-Avionics-Control-Board repository on GitHub, at the commit this page was made from: the board is AVIONICS_PCB/AVIONICS_PCB.kicad_pcb and its schematic AVIONICS_PCB/AVIONICS_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AVIONICS PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask AlexBerryhill before reusing the design.