2 layers35 × 47 mm
2 layers74 × 26 mm
ISPnub Stick
Alex9779/ISPnub-Stick- Size
- 74 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 41
- Pads
- 79
- Tracks, vias
- 71, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Nov 2023
- Updated
- 16 Nov 2023
Overview
ISPnub Stick is an open-source printed circuit board by Alex9779, from the Alex9779/ISPnub-Stick repository on GitHub. It is a 2-layer board of 74 × 26 mm with 15 parts on 41 nets, routed with 71 tracks and 5 vias.
It is built around the ATMEGA1284P-AU. Its parts include 3 resistors, 2 capacitors, 2 diodes, 2 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdISPnub-Stick
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | ATmega1284P-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | BOTTOM | ALITECS:Edge_x3 | PT2 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | X1 |
| 1 | SW_Push | ALITECS:TS-1187A-B-A-B | SW1 |
| 1 | SW_SPDT | ALITECS:SS-12D02-VG5 | SW2 |
| 1 | TOP | ALITECS:Edge_x3 | PT1 |
| 1 | emerald | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | red | LED_SMD:LED_0805_2012Metric | D1 |
The 13 most common of 15 parts.
Similar boards
- 2 layers61.4 × 103.3 mm
HB Dis EP-42BW
jp112sdl/HB-Dis-EP-42BW
4.2" ePaper Display mit 10 Tasterkanälen für Homematic
45 parts18 - 2 layers75 × 75 mm
HB UNI SEN BATT ATMega1284P E07-900MM10S CO2 FUEL4EP
FUEL4EP/HomeAutomation
Home Automation repository of FUEL4EP
81 parts15CC0-1.0 - 2 layers94 × 94 mm
3axis magnitometer
NarodniySputnik/Gladiolus-1
Gladiolus-1 - автономный модуль для приема и передачи изображений в формате SSTV (Slow Scan TeleVision) на малом космическом аппарате (МКА) формата CubeSat
96 parts9GPL-3.0 - 2 layers38 × 200 mm
SPACEDOS02A PCB01A
UniversalScientificTechnologies/SPACEDOS02
Solid-state PIN diode dosimeter for manned spacecraft. Liulin detector replacement.
120 parts8GPL-3.0 - 2 layers136.2 × 85.9 mm
BATDATUNIT01
mlab-modules/BATDATUNIT01
Multiple parallel Li-ion 18650 battery cell module with BMS and data storage with MCU control.
225 parts5GPL-3.0 - 2 layers99.1 × 99.1 mm
Vent
pandemiaplan/OP-Vent
A Simple, Open-Source Ventilator using a Proportional Solenoid Valve
113 parts5 - 2 layers93.5 × 48.2 mm
SPACEDOS01
UniversalScientificTechnologies/SPACEDOS01
Silicon diode dosimeter optimized for spacecraft dosimetry
92 parts5GPL-3.0
Questions
How big is the ISPnub Stick PCB?
It measures 74 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ISPnub Stick use?
15 parts, built around the ATMEGA1284P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ISPnub Stick KiCad files?
From the Alex9779/ISPnub-Stick repository on GitHub, at the commit this page was made from: the board is ISPnub-Stick.kicad_pcb and its schematic ISPnub-Stick.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ISPnub Stick design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alex9779 before reusing the design.