Skip to the content
2 layers419 × 150.2 mmFXTal rev1, the printed circuit board in 3D

xwhatsit/QMK atmega32u4 pcb for the IBM Model F XT and IBM Bigfoot

Size
419 × 150.2 mm
Copper layers
2
Thickness
0.8 mm
Parts
118
Nets
313
Pads
532
Tracks, vias
652, 2
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20230410)
Created
29 Oct 2021
Updated
4 Jul 2023

Overview

FXTal rev1 is an open-source printed circuit board by Alectardy98, from the Alectardy98/pcb_FXTal_Rev1 repository on GitHub. It is a 2-layer board of 419 × 150.2 mm with 118 parts on 313 nets, routed with 652 tracks and 2 vias.

README

README.md

FXTal Rev. 1

text
A Drop In Replacement PCB For The IBM Model F XT
                                        

capture-2022-10-17T17_19_43 746Z capture-2022-10-17T17_19_39 296Z

All Supported Layouts can be seen HERE

xwhatsit/QMK atmega32u4 pcb for the IBM Model F XT and IBM Bigfoot

This version has been tested and has shown to function properly in both supported layouts.

  • The firmware can be found in the firmware folder
  • All files for production though JLCPCB can be found in the JLCPCB folder
  • This pcb requires an xwhatsit to function, see purdeaandrei's open source files
  • Test Points are currently on the pcb, when building make sure to cover the bottom test points with eletrical tape to prevent a short
  • The origonal backplate will need to be modified to remove the right PCB mounting peg, to prevent interfearance
  • The barrel Plate will need to be modified, a scan of the required holes are provided in folder meta, to help with the task

The PCB thickness should be 0.6mm or 0.08mm. This is thin enough to allow the board to flex into shape.

  • 0.8mm tested and working

Standard glossy soldermask is probably the best choice. JLCPCB has had issues with wear on their black soldermask before. They have changed the formula, but a standard green/red/blue/yellow/purple/white/etc. glossy solder mask is probaby the safest bet for keyswitch wear resistance. Higher wear resistance might also be achieved by coating the front of the capacitive pads in silkscreen, as silkscreen is an extra layer of epoxy. I am unsure how this will affect keyfeel or actuation, however.

For connecting the board to an xwhatsit or other controller, I would recommend 3M 8132/06 100, which has the correct pitch to connect this pcb to an xwhatsit

Capacitive pad footprints have been taken dvjs project the mtf-capacitive Other mesurements have been taken by NeonKight and myself from an origonal IBM F XT. The key matrix of the PCB is custom, made by myself guided by dvjs and purdeaandrei.

Released without warranty, use at your own risk.
PRs & feedback welcome!

| Authors |

Alectardy98

| Special Thanks |

djvs - for generial and overall help.
NeonKnight - for mesurments and reversenginering.
purdeaandrei - for writing the QMK firmware to work with xwhatsit.

Parts

118
QtyValueFootprintReferences
11,1lib_fp:SW_CAP_IBM_FSW_33
11,2lib_fp:SW_CAP_IBM_FSW_31
11,3lib_fp:SW_CAP_IBM_FSW_29
11,4lib_fp:SW_CAP_IBM_F_ALTSW_30
11,5lib_fp:SW_CAP_IBM_FSW_27
11,6lib_fp:SW_CAP_IBM_F_ALTSW_28
11,7lib_fp:SW_CAP_IBM_FSW_25
11,8lib_fp:SW_CAP_IBM_F_ALTSW_26
12,1lib_fp:SW_CAP_IBM_FSW_23
12,2lib_fp:SW_CAP_IBM_F_ALTSW_43
12,3lib_fp:SW_CAP_IBM_FSW_32
12,4lib_fp:SW_CAP_IBM_F_ALTSW_45
12,5lib_fp:SW_CAP_IBM_F_ALTSW_15
12,6lib_fp:SW_CAP_IBM_F_ALTSW_90
12,7lib_fp:SW_CAP_IBM_FSW_22
12,8lib_fp:SW_CAP_IBM_F_ALTSW_1
13,1lib_fp:SW_CAP_IBM_FSW_44
13,2lib_fp:SW_CAP_IBM_F_ALTSW_96
13,3lib_fp:SW_CAP_IBM_FSW_49
13,4lib_fp:SW_CAP_IBM_FSW_10
13,5lib_fp:SW_CAP_IBM_F_ALTSW_83
13,6lib_fp:SW_CAP_IBM_FSW_74
13,7lib_fp:SW_CAP_IBM_F_ALTSW_93
13,8lib_fp:SW_CAP_IBM_F_ALTSW_02
14,1lib_fp:SW_CAP_IBM_FSW_41
14,2lib_fp:SW_CAP_IBM_F_ALTSW_34
14,3lib_fp:SW_CAP_IBM_FSW_94
14,4lib_fp:SW_CAP_IBM_F_ALTSW_14
14,5lib_fp:SW_CAP_IBM_F_ALTSW_17
14,6lib_fp:SW_CAP_IBM_FSW_19
14,7lib_fp:SW_CAP_IBM_FSW_03
14,8lib_fp:SW_CAP_IBM_F_ALTSW_04
15,1lib_fp:SW_CAP_IBM_F_ALTSW_86
15,2lib_fp:SW_CAP_IBM_FSW_92
15,3lib_fp:SW_CAP_IBM_F_ALTSW_35
15,4lib_fp:SW_CAP_IBM_FSW_24
15,5lib_fp:SW_CAP_IBM_FSW_76
15,6lib_fp:SW_CAP_IBM_F_ALTSW_89
15,7lib_fp:SW_CAP_IBM_FSW_05
15,8lib_fp:SW_CAP_IBM_F_ALTSW_06
16,1lib_fp:SW_CAP_IBM_F_ALTSW_88
16,2lib_fp:SW_CAP_IBM_FSW_11
16,3lib_fp:SW_CAP_IBM_F_ALTSW_48
16,4lib_fp:SW_CAP_IBM_FSW_36
16,5lib_fp:SW_CAP_IBM_F_ALTSW_38
16,6lib_fp:SW_CAP_IBM_F_ALTSW_91
16,7lib_fp:SW_CAP_IBM_FSW_95
16,8lib_fp:SW_CAP_IBM_FSW_07
17,1lib_fp:SW_CAP_IBM_FSW_87
17,2lib_fp:SW_CAP_IBM_FSW_46
17,3lib_fp:SW_CAP_IBM_F_ALTSW_16
17,4lib_fp:SW_CAP_IBM_FSW_39
17,5lib_fp:SW_CAP_IBM_FSW_37
17,6lib_fp:SW_CAP_IBM_F_ALTSW_51
17,7lib_fp:SW_CAP_IBM_FSW_08
17,8lib_fp:SW_CAP_IBM_F_ALTSW_09
18,1lib_fp:SW_CAP_IBM_F_ALTSW_77
18,2lib_fp:SW_CAP_IBM_FSW_18
18,3lib_fp:SW_CAP_IBM_F_ALTSW_85
18,4lib_fp:SW_CAP_IBM_FSW_40
18,5lib_fp:SW_CAP_IBM_F_ALTSW_84
18,6lib_fp:SW_CAP_IBM_F_ALTSW_65
18,7lib_fp:SW_CAP_IBM_FSW_0
18,8lib_fp:SW_CAP_IBM_F_ALTSW_47
19,1lib_fp:SW_CAP_IBM_FSW_80
19,1lib_fp:CAL_CAP_IBM_FSW_52
19,2lib_fp:SW_CAP_IBM_F_ALTSW_79
19,3lib_fp:SW_CAP_IBM_FSW_81
19,4lib_fp:SW_CAP_IBM_FSW_75
19,5lib_fp:SW_CAP_IBM_F_ALTSW_50
19,6lib_fp:SW_CAP_IBM_FSW_42
19,7lib_fp:SW_CAP_IBM_F_ALTSW_78
19,8lib_fp:SW_CAP_IBM_FSW_21
1A,1lib_fp:SW_CAP_IBM_F_ALTSW_60
1A,2lib_fp:SW_CAP_IBM_FSW_82
1A,3lib_fp:SW_CAP_IBM_F_ALTSW_56
1A,4lib_fp:SW_CAP_IBM_FSW_20
1A,5lib_fp:SW_CAP_IBM_F_ALTSW_73
1A,6lib_fp:SW_CAP_IBM_FSW_12
1A,7lib_fp:SW_CAP_IBM_F_ALTSW_69

The 80 most common of 118 parts.

Similar boards

  • 2 layers218.5 × 159.5 mmLily58 Lite Rev3, the printed circuit board in 3D

    Lily58 Lite Rev3

    kata0510/Lily58

    6×4+4keys column-staggered split keyboard.

    118 parts2.3k
  • 2 layers139.1 × 107.7 mmLotus58 Glow 131, the printed circuit board in 3D

    Lotus58 Glow 131

    TweetyDaBird/Lotus-58-Classic

    A split ergo linear keyboard derived from the Lily58 family

    118 parts390
  • 2 layers40 × 100 mmBack pcb, the printed circuit board in 3D

    Back pcb

    ZeroPhone/ZeroPhone-PCBs

    PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

    118 parts148GPL-3.0
  • 2 layers60 × 80 mmRobotCrawler, the printed circuit board in 3D

    RobotCrawler

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    118 parts94BSD-3-Clause
  • 2 layers142.1 × 106 mmPi CM4 16, the printed circuit board in 3D

    Pi CM4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    118 parts78
  • 2 layers99.6 × 100 mmPCB Fujitora, the printed circuit board in 3D

    PCB Fujitora

    OPRobots/FujitoraBot

    Robotracer - siguelíneas de alto rendimiento; con succión, tracción brushless en sistema tetra y procesador STM32F4

    118 parts68GPL-3.0
  • 2 layers100 × 80 mmPanel, the printed circuit board in 3D

    Panel

    richardeoin/ax

    This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.

    118 parts48
  • 2 layers100 × 100 mmFloppyExerciser, the printed circuit board in 3D

    FloppyExerciser

    schlae/FloppyExerciser

    Simple tool for testing and repairing floppy drives

    118 parts47

Questions

How big is the FXTal rev1 PCB?

It measures 419 × 150.2 mm and has 2 copper layers, 0.8 mm thick.

What parts does the FXTal rev1 use?

118 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FXTal rev1 KiCad files?

From the Alectardy98/pcb_FXTal_Rev1 repository on GitHub, at the commit this page was made from: the board is FXTal_rev1.kicad_pcb and its schematic FXTal_rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FXTal rev1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Alectardy98 before reusing the design.