2 layers25.4 × 23.9 mm
2 layers20.8 × 12.2 mm
EncoderBoard
AlanFord/GoGoGoGoGoGo boards for Contextual Electronics class
- Size
- 20.8 × 12.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 4
- Pads
- 14
- Tracks, vias
- 16, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Dec 2016
- Updated
- 9 Feb 2017
Overview
EncoderBoard is an open-source printed circuit board by AlanFord, from the AlanFord/GoGoGo repository on GitHub. It is a 2-layer board of 20.8 × 12.2 mm with 5 parts on 4 nets, routed with 16 tracks and 0 vias.
It is built around the RPI-579N1. Its parts include 2 resistors, 1 IC and 1 connector.
Main components
1README
README.mdGoGoGo
These projects support the GoGoGo module of the Contextual Electronics course.
The MotorDrive is a circuit board design that supports a brushed DC motor driver.
The EncoderBoard is a circuit board design that supports an optical motor encoder suitable for use with an encoder wheel (see below).
The EncoderWheel is the design for an encoder wheel that will fit the Sparkfun Shadow chasis (ROB-13301) and a Sparkfun 140 RPM hobby gearmotor (ROB-13302).
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100 | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 3.3K | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Angled_1x03 | P1 |
| 1 | OPTO-OUT | Measurement_Points:Measurement_Point_Square-SMD-Pad_Big | W1 |
| 1 | RPI-579N1 | EncoderBoard:RPI-579N1 | U1 |
More from AlanFord/GoGoGo
1Similar boards
- 2 layers49.3 × 21.3 mm
- 2 layers98 × 27 mm
- 2 layers21 × 33 mm
24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm
A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm
Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm
KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm
- 2 layers43.2 × 28.5 mm
Questions
How big is the EncoderBoard PCB?
It measures 20.8 × 12.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EncoderBoard use?
5 parts, built around the RPI-579N1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EncoderBoard KiCad files?
From the AlanFord/GoGoGo repository on GitHub, at the commit this page was made from: the board is EncoderBoard/EncoderBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EncoderBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask AlanFord before reusing the design.