2 layers64 × 56 mm
Rpi dbt03
bildschirmtext/rpi-dbt03
Hardware, Software and Firmware for a Raspberry Pi to DBT-03 adapter
36 parts11MIT
2 layers61.7 × 61.5 mm
Transmitter
AladdinBensaid/Transmitter_PCBRC controller
- Size
- 61.7 × 61.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 30
- Pads
- 102
- Tracks, vias
- 122, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Feb 2023
- Updated
- 8 Feb 2023
Overview
Transmitter is an open-source printed circuit board by AladdinBensaid, from the AladdinBensaid/Transmitter_PCB repository on GitHub. It is a 2-layer board of 61.7 × 61.5 mm with 28 parts on 30 nets, routed with 122 tracks and 0 vias.
It is built around the ATMEGA8L-8PU. Its parts include 9 connectors, 7 capacitors, 4 ICs, 2 diodes and 1 resistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CP | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C4, C5, C6, C7 |
| 4 | Screw_Terminal_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1, J5, J12, J13 |
| 2 | 22pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2 |
| 2 | Screw_Terminal_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3, J10 |
| 2 | Screw_Terminal_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J4 |
| 1 | 16Mhz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | ATmega8L-8PU | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | C | Capacitor_THT:C_Radial_D5.0mm_H7.0mm_P2.00mm | C3 |
| 1 | LD1117S33TR_SOT223 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | U3 |
| 1 | LM78L05_TO92 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | U4 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U2 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Screw_Terminal_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
The 24 most common of 28 parts.
Similar boards
- 2 layers52.5 × 55 mm
- 2 layers44.5 × 72.7 mm
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
28 parts2.1k - 2 layers95 × 54 mm
EinkPDA screen
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
28 parts2kApache-2.0 - 2 layers137.2 × 41.5 mm
Breakout 64pin 176122-6-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
28 parts1.2k - 2 layers45 × 45 mm
Smartbuttons
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
28 parts915 - 2 layers24.1 × 36.2 mm
Esp32miniBT
asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)
28 parts911GPL-3.0 - 2 layers34.8 × 12.2 mm
Questions
How big is the Transmitter PCB?
It measures 61.7 × 61.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Transmitter use?
28 parts, built around the ATMEGA8L-8PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Transmitter KiCad files?
From the AladdinBensaid/Transmitter_PCB repository on GitHub, at the commit this page was made from: the board is transmitter kicad_files/transmitter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Transmitter design in my own project?
Its repository states no licence, so its author keeps all rights: ask AladdinBensaid before reusing the design.