
Spark rp2040-swd probe
emb3rcia/spark-rp2040-swd-probe
Open-source financialy-accesible SWD probe.

Kicad thermometer design is an open-source printed circuit board by Aissle, from the Aissle/Clinical-thermometer-design repository on GitHub. It is a 4-layer board of 73.9 × 15.1 mm with 35 parts on 49 nets, routed with 565 tracks and 60 vias.
It is built around the ESP32-C3-MINI-1-N4, DS18B20 and PTS636 SM25F SMTR LFS, with the 1N5819WS, TP4056-42-ESOP8 and TYPEC-304-BCP16 among its other parts. Its parts include 11 capacitors, 10 resistors and 1 diode. It belongs with the sensors and measurement boards and the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C5, C7, C8, C9, C10, C11 |
| 3 | 4.7k | Resistor_SMD:R_0402_1005Metric | R1, R8, R9 |
| 3 | LED | LED_SMD:LED_0402_1005Metric | Green-D2, Red-D1, Red-D3 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R7, R10 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 22u | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | PTS636_SM25F_SMTR_LFS | imported-Modules:push-tactile-switch-PTS636SM25FSMTRLFS | Swtch1, Swtch2 |
| 1 | 0.4 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 30k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 680 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | BM02B-SRSS-TB LFSN | imported-Modules:CONN_BM02B-SRSS-TB_JST | Btry-cntr1 |
| 1 | DS18B20 | imported-Modules:DS18B20 | Tmptr1 |
| 1 | ER_OLEDM0.91_1x-I2C | imported-Modules:ER_OLEDM0.91_1x-I2C-No-dimensions | OLED1 |
| 1 | ESP32-C3-MINI-1-N4 | ESP32-C3-MINI-1-N4:XCVR_ESP32-C3-MINI-1-N4 | ESP1 |
| 1 | TI TLV1117-33IDCY | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Vlt-Reg1 |
| 1 | TP4056-42-ESOP8 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | Btry-chrgr1 |
| 1 | TYPEC-304-BCP16 | TYPEC-304-BCP16:USB-C-SMD_TYPEC-304-BCP16 | USB1 |
| 1 | WS2812B-B-V6 | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | RGB1 |

emb3rcia/spark-rp2040-swd-probe
Open-source financialy-accesible SWD probe.


OyinChaze/Clinical_Thermometer
A PCB project for a clinical thermometer using esp32.

PedroBMedeiros/PolySaber
Firmware for Cal Poly Senior Project - PolySaber a Custom PCB Soundboard

thryothorus/wheel_rfm69_counter
RFM69 and battery powered wheel counter (for monitoring various critters at The Creature Conservancy, Ann Arbor)

austinscreations/WT32-SC01_POE
a custom POE shields designed for the WT32-SC01 esp32 enabled touch screen display

Matyas604/Pocket-lightning-detector
A lightning detector that runs on a battery and fits in your pocket. It records the distance, energy and current time of a lightning strike, and you can then view this data via Bluetooth in mobile app.

atomicra1n/wifi-geiger-counter
A DIY Geiger counter PCB which can detect ionizing radiation and log readings over Wi-Fi. Built with an ESP32, and a HV multiplier circuit that steps up 3.7V to 400V for the GM tube.
It measures 73.9 × 15.1 mm and has 4 copper layers, 1.6 mm thick.
35 parts, built around the ESP32-C3-MINI-1-N4, DS18B20, PTS636 SM25F SMTR LFS and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Aissle/Clinical-thermometer-design repository on GitHub, at the commit this page was made from: the board is Kicad-thermometer-design.kicad_pcb and its schematic Kicad-thermometer-design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Aissle before reusing the design.