
Carrier
moinsen-dev/open-bed-climate
Open-source, local-first bed climate system: water-cooled/heated mat, standard parts, DIY kits, Home Assistant. Design phase.

Proyecto de KiCad para el Analizador de Frecuencias (TD3).
TD3-FrequencyAnalizer is an open-source printed circuit board by AguileraGabriel, from the AguileraGabriel/PCB-FrequencyAnalizer repository on GitHub. It is a 2-layer board of 179.3 × 113.2 mm with 70 parts on 88 nets, routed with 231 tracks and 0 vias.
It is built around the ESP32-S3-DEVKITC-1-N8, TL072 and BAT54S, with the BC547 among its other parts. Its parts include 31 resistors, 13 capacitors, 6 ICs, 3 diodes and 3 connectors. It belongs with the ESP32 boards of this library.
Proyecto de KiCad para el Analizador de Frecuencias (TD3).
Este es un proyecto de diseño de PCB desarrollado en KiCad 10.0.4.
TD3-FrequencyAnalizer.kicad_pro: Archivo de proyecto de KiCad.TD3-FrequencyAnalizer.kicad_sch: Esquema del circuito.TD3-FrequencyAnalizer.kicad_pcb: Diseño del circuito impreso (PCB)..gitignore: Exclusiones de Git para evitar subir archivos temporales y copias de seguridad de KiCad.| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R10, R11, R12, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +13 |
| 6 | 100nF | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C7, C8 |
| 6 | R_Potentiometer_Trim | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV2, RV3, RV4, RV5, RV6, RV7 |
| 4 | C | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C10, C12, C13, C14 |
| 4 | TestPoint | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP4, TP5, TP6, TP7 |
| 3 | 1uF | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C1, C6, C11 |
| 2 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D2, D4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J3 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | 50 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | AD9833_Module | AD9833_Module:AD9833_Module | U4 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_HandSolder | Q1 |
| 1 | ESP32-S3-DevKitC | Espressif:ESP32-S3-DevKitC | U1 |
| 1 | G6A | Relay_THT:Relay_DPDT_Omron_G6A | K1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J2 |
| 1 | Señal AD9833 | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP3 |
| 1 | Señal de Salida | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
| 1 | TL071 | Package_DIP:CERDIP-8_W7.62mm_SideBrazed_LongPads_Socket | U6 |
| 1 | TL072 | Package_DIP:CERDIP-8_W7.62mm_SideBrazed_LongPads_Socket | U3 |
| 1 | TL074 | Package_DIP:CERDIP-14_W7.62mm_SideBrazed_LongPads_Socket | U2 |
| 1 | X9C103S_Module | X9C103S_Module:X9C103S_Module | U5 |

moinsen-dev/open-bed-climate
Open-source, local-first bed climate system: water-cooled/heated mat, standard parts, DIY kits, Home Assistant. Design phase.

james-l-key/Esp32_patch_bay_circuit
Circuit and PCB for Esp32_patch_bay

jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an

MagicTINTIN/ChrisKeyboards
I couldn’t find the keyboard I wanted, so I built it.

EmmanuelRGuesser/PJ_Integrador_3
Projeto de medidor de consumo enérgetico residencial desenvolvido para ESP32



It measures 179.3 × 113.2 mm and has 2 copper layers, 1.6 mm thick.
70 parts, built around the ESP32-S3-DEVKITC-1-N8, TL072, BAT54S and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AguileraGabriel/PCB-FrequencyAnalizer repository on GitHub, at the commit this page was made from: the board is TD3-FrequencyAnalizer.kicad_pcb and its schematic Acondicionamiento_de_señal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AguileraGabriel before reusing the design.