Skip to the content
2 layers270 × 11 mmDaylight UV, the printed circuit board in 3D

Modifications for Voron Printers by Vector 3D

Size
270 × 11 mm
Copper layers
2
Thickness
1.6 mm
Parts
55
Nets
26
Pads
76
Tracks, vias
72, 48
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
3 Dec 2021
Updated
25 Jan 2025

Overview

Daylight UV is an open-source printed circuit board by AdamV3D, from the AdamV3D/V3D-Voron-Mods repository on GitHub. It is a 2-layer board of 270 × 11 mm with 55 parts on 26 nets, routed with 72 tracks and 48 vias.

Its parts include 21 diodes, 6 resistors and 2 connectors.

README

Daylight_on_a_Stick/Daylight_UV/README.md

Daylight on a stick

render

Chainable 24V LED bar to be used with high quality 4000K LEDs to give the illusion of daylight in your Voron.

Ideally popuplated with 90+ CRI LEDs (3V, ~60mA), but currently LCSC does not carry those, so the BOM has 80 CRI ones. Just as bright, bit less accurate color reproduction.
If you solder them yourself, get better leds, for example:
Digikey CRI90+
AliExpress CRI95+ (non affiliate link)

Use any angled 2.54mm(0.1") connector such as a 90 degree pinheader, angled JST-XH or Molex KK254.

Klipper

Use the Daylight on a stick directly on 24V or hook them up to a spare heater output on your controlboard. In this last case you can control it using:

text
[output_pin daylight]
pin: ##PIN##
pwm: True
cycle_time: 0.01

Parts

55
QtyValueFootprintReferences
21LED_ALTLED_SMD:LED_PLCC_2835D1, D2, D3, D4, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 +5
620R 0.25WResistor_SMD:R_1206_3216MetricR1, R2, R3, R4, R5, R6
2Conn_01x02Daylight:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal DaylightJ1, J2
2LOGODaylight:Logo_Voron_10mm_CopperG***, G***
2MountingHoleMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2

The 33 most common of 55 parts.

More from AdamV3D/V3D-Voron-Mods

4
  • 2 layers270 × 11 mmDaylight, the printed circuit board in 3D

    Daylight

    AdamV3D/V3D-Voron-Mods

    Modifications for Voron Printers by Vector 3D

    42 parts64
  • 2 layers270 × 11 mmDaylight Neo, the printed circuit board in 3D

    Daylight Neo

    AdamV3D/V3D-Voron-Mods

    Modifications for Voron Printers by Vector 3D

    41 parts64
  • 2 layers170 × 11 mmDaylight mini, the printed circuit board in 3D

    Daylight mini

    AdamV3D/V3D-Voron-Mods

    Modifications for Voron Printers by Vector 3D

    31 parts64
  • 2 layers170 × 11 mmDaylight Neo Mini, the printed circuit board in 3D

    Daylight Neo Mini

    AdamV3D/V3D-Voron-Mods

    Modifications for Voron Printers by Vector 3D

    29 parts64

Similar boards

  • 2 layers229.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    55 parts2.1k
  • 2 layers370 × 11 mmDaylight Disco XXL, the printed circuit board in 3D

    Daylight Disco XXL

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    55 parts1.1kGPL-3.0
  • 2 layers370 × 10 mmE3NGLEDstick, the printed circuit board in 3D

    E3NGLEDstick

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    55 parts915
  • 2 layers139.3 × 94.8 mmFlake, the printed circuit board in 3D

    Flake

    lever-tech/flake

    An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]

    55 parts531CERN-OHL-W-2.0
  • 2 layers237.5 × 102.9 mmMemory, the printed circuit board in 3D

    Memory

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    55 parts301Unlicense
  • 2 layers60.6 × 24.1 mmBlep hackerboard, the printed circuit board in 3D

    Blep hackerboard

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    55 parts253GPL-3.0
  • 2 layers100 × 96.5 mmKeyboard ch552-36-lhs, the printed circuit board in 3D

    Keyboard ch552-36-lhs

    rgoulter/keyboard-labs

    Repo with my PCB designs and keyboard firmware

    55 parts236
  • 2 layers190.5 × 85.7 mmDissatisfaction30, the printed circuit board in 3D

    Dissatisfaction30

    dcpedit/dissatisfaction30

    To get the PCB manufactured, upload dissat-pcb.zip to JLCPCB, select your desired PCB color while keeping all the other default options, and place your order (minimum 5).

    55 parts147CC-BY-4.0

Questions

How big is the Daylight UV PCB?

It measures 270 × 11 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Daylight UV use?

55 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Daylight UV KiCad files?

From the AdamV3D/V3D-Voron-Mods repository on GitHub, at the commit this page was made from: the board is Daylight_on_a_Stick/Daylight_UV/Daylight_UV.kicad_pcb and its schematic Daylight_on_a_Stick/Daylight/Daylight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Daylight UV design in my own project?

Its repository states no licence, so its author keeps all rights: ask AdamV3D before reusing the design.