

PowerBoard
- Size
- 77.5 × 107.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 66
- Pads
- 315
- Tracks, vias
- 582, 7
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Apr 2020
- Updated
- 15 Apr 2023
Overview
PowerBoard is an open-source printed circuit board by AUV-IITK, from the AUV-IITK/electrical-systems repository on GitHub. It is a 2-layer board of 77.5 × 107.9 mm with 64 parts on 66 nets, routed with 582 tracks and 7 vias.
It is built around the BMP388, ACS712ELCTR-30A-T and TMUX1104DGSR, with the SIS427EDN-T1-GE3-HXY and MMBT3906 among its other parts. Its parts include 22 connectors, 17 resistors, 8 capacitors, 4 ICs and 4 diodes. It belongs with the RP2040 boards of this library.
Main components
5BMP388
LGA-10(2x2)-40℃~+85℃ 1.65V~3.6V 1pa/K 2uA 30Kpa~1.25bar 50pa 8pa I2C、SPI LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure SensorsACS712ELCTR-30A-T
SOIC-8-40℃~+85℃ 1.2mΩ 2.1kVrms 30A 50kHz 5V 5us 66mV/A Support SOIC-8 Current Sensors ROHSALLEGROCurrent SensorsTMUX1104DGSR
VSSOP-10-40℃~+125℃ 1.08V~5.5V 1.5pC 12ns 155MHz 2Ω 35pF 4 4:1 5ns Bidirectional analog channel、Fault protection VSSOP-10 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersSIS427EDN-T1-GE3-HXY
DFN-8L(3x3)DFN-8L(3x3) MOSFETs ROHSHXY MOSFETMOSFETsMMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4, R9 |
| 4 | Battery_out | footprint:input | J18, J19, J20, J21 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | .5k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R17, R18, R19 |
| 3 | Buck_out | footprint:input | J5, J12, J15 |
| 3 | Conn_01x02_Male | footprint:01x02 | J16, J17, J22 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C7 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C5 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10, R12 |
| 2 | 1nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C8 |
| 2 | 20k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R14 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R8 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7 |
| 2 | ACS712ELCTR-30A-T | footprint:SOIC127P600X175-8N | CS1, CS2 |
| 2 | SIS427EDN-T1-GE3 | footprint:SIS862DNT1GE3 | Q1, Q3 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | 240 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11 |
| 1 | BMP388 | footprint:PQFN50P200X200X80-10N | U2 |
| 1 | Battery_out | battery_connector:molex_supersabre_1x2_172043-0201 | J11 |
| 1 | Boost | footprint:CON_436500400_MOL | J3 |
| 1 | Boost_out | footprint:input | J14 |
| 1 | Buck | footprint:CON_436500400_MOL | J4 |
| 1 | Conn_02x13_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J2 |
| 1 | IN1 | battery_connector:molex_supersabre_1x2_172043-0201 | J1 |
| 1 | IN2 | battery_connector:molex_supersabre_1x2_172043-0201 | J13 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | MMBT3906 | footprint:SOT95P240X120-3N | Q2 |
| 1 | Pico | footprint:RPi_Pico_SMD_TH | U1 |
| 1 | TMUX1104DGSR | footprint:DGS10_TEX | U3 |
| 1 | bmp388 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | probe1 | footprint:01x02 | J6 |
| 1 | probe2 | footprint:01x02 | J9 |
| 1 | probe3 | footprint:01x02 | J10 |
| 1 | probe4 | footprint:01x02 | J7 |
More from AUV-IITK/electrical-systems
4- 2 layers65.4 × 46.4 mm

- 2 layers54 × 31.8 mm

- 2 layers43 × 37.1 mm

- 2 layers82.4 × 96.9 mm

Similar boards
- 2 layers103.2 × 74.1 mm

- 2 layers140 × 100 mm

Plts monitoring controller
desvandi/PLTSMonitoring_Firmware-Backend
Integrated to PLTSMonitoring_PWA
152 parts - 2 layers150.5 × 48 mm

Battery bus
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
136 parts915 - 4 layers40.3 × 57.1 mm

- 4 layers140.5 × 58.6 mm

- 4 layers73.6 × 59.8 mm

Leak sensor v1
lewipewi/leakwatch
A multi-channel leak sensor for equipment enclosures. Instead of reporting "wet / dry" like a normal leak probe, it measures how wet each enclosure is, on a separate channel per enclosure, and carries a second circuit…
90 parts - 2 layers

- 8 layers38.5 × 38.5 mm

Flight Controller
rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!
133 parts57MIT
Questions
How big is the PowerBoard PCB?
It measures 77.5 × 107.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PowerBoard use?
64 parts, built around the BMP388, ACS712ELCTR-30A-T, TMUX1104DGSR and SIS427EDN-T1-GE3-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerBoard KiCad files?
From the AUV-IITK/electrical-systems repository on GitHub, at the commit this page was made from: the board is Power-Board/PowerBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask AUV-IITK before reusing the design.