2 layers82.1 × 82.1 mm
Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0
4 layers37.6 × 15 mm
RFRADAR1
AGH-Micro/CW-Radar-2.4GHz- Size
- 37.6 × 15 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 37
- Nets
- 27
- Pads
- 130
- Tracks, vias
- 225, 42
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 May 2025
- Updated
- 18 May 2025
Overview
RFRADAR1 is an open-source printed circuit board by AGH-Micro, from the AGH-Micro/CW-Radar-2.4GHz repository on GitHub, published under the MIT licence. It is a 4-layer board of 37.6 × 15 mm with 37 parts on 27 nets, routed with 225 tracks and 42 vias.
It is built around the ADF4351BCP. Its parts include 26 capacitors, 4 resistors, 2 ICs, 2 connectors and 1 inductor.
Main components
1README
README.mdCW-Radar-2.4GHz
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C3, C9, C19, C21, C23, C25, C28 |
| 6 | 10pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C11, C18, C20, C22, C24 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C7, C27 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C15 |
| 1 | 1.2nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C14 |
| 1 | 1200pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C17 |
| 1 | 2700pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C26 |
| 1 | 270R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4 |
| 1 | 33pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12 |
| 1 | 39nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 47nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L4 |
| 1 | 680R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 68pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 1 | 90R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | ADF4351 | Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.25x3.25mm | U2 |
| 1 | ASCO 24MHz | Oscillator:Oscillator_SMD_Abracon_ASCO-4Pin_1.6x1.2mm | X1 |
| 1 | Conn_01x06 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J1 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J2 |
| 1 | LDM152G4505FC048 | KNMicroProprietarRFLIB:4 pin 0402 | Z1 |
| 1 | PLACEHOLDER | Package_CSP:Analog_LFCSP-8-1EP_3x3mm_P0.5mm_EP1.53x1.85mm | U1 |
Similar boards
- 2 layers118.5 × 94.5 mm
WaveLab24GHz
PA0MHE/Wavelab-24G-Addon-module
Can be used as addon module for the Wavelab 23X1008XP module, which was available during the 2021-2022 timeframe on www.ebay.pl seller:bisonelectronics-sp2jyr The module converts the first-IF 2364MHz to 432MHz (or…
207 parts5MIT - 4 layers40 × 33 mm
Version 2.0
EObianom/ADF4351
This repository is for ADF4351 registory calculation and hardware design.
50 parts2MIT - 4 layers71.1 × 124.5 mm
ADL5375 revAR
JQIamo/ESB_Signal_Generator
Modulation signal generator for electronic sideband locking with a Pound-Drever-Hall cavity
143 parts2 - 2 layers195 × 148.5 mm
- 2 layers60 × 40 mm
- 2 layers
OldSpecAnFrontEnd
richardhosking/KicadSpecAnalayser-
KICAD Files for Spectrum Analyser design
156 parts1 - 4 layers127 × 101.6 mm
Questions
How big is the RFRADAR1 PCB?
It measures 37.6 × 15 mm and has 4 copper layers, 1.61 mm thick.
What parts does the RFRADAR1 use?
37 parts, built around the ADF4351BCP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RFRADAR1 KiCad files?
From the AGH-Micro/CW-Radar-2.4GHz repository on GitHub, at the commit this page was made from: the board is RFRADAR1/RFRADAR1.kicad_pcb and its schematic RFRADAR1/RFRADAR1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RFRADAR1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).