

8-4GHzDSN V2
8.4 GHz DSN downconverter
- Size
- 60 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 49
- Pads
- 241
- Tracks, vias
- 349, 134
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 Sep 2022
- Updated
- 19 Sep 2022
Overview
8-4GHzDSN V2 is an open-source printed circuit board by PA0MHE, from the PA0MHE/8-4GHz_DSN repository on GitHub. It is a 2-layer board of 60 × 40 mm with 68 parts on 49 nets, routed with 349 tracks and 134 vias.
It is built around the ATTINY85-20SU, PGA103U and ADF4351BCP, with the BFCN-8450+, L7805 and SS34 among its other parts. Its parts include 35 capacitors, 9 ICs, 8 resistors, 5 inductors and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PGA103U
SO-8-18V~-4.5V、4.5V~18V -40℃~+85℃ 1 100uV/℃ 11nV/√Hz@1kHz 2.6mA 200uV 25mA 50nA 50nA 6V/us SO-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierADF4351BCP
QFN32Wideband Synthesizer with Integrated VCOAnalog DevicesUncategorisedBFCN-8450+
SMD3216-4P-55℃~+100℃ 1.6dB 50Ω 8.45GHz 8350MHz~8550MHz Bandpass Filter SMD3216-4P Ceramic Filters ROHSMini-CircuitsCeramic FiltersL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.md8-4GHz_DSN
8.4 GHz DSN downconverter, intended to use with external LNA (e.g. 25dB Gain, 1dB NF) in front
Input : 8400 .. 8470 MHz
Output: 400 .. 470 MHz
REF-in: 10 MHz 0.7-3.3 Vpp reference input from an OCXO or GPSDO
Supply: 8V DC
The converter itself has a conversion gain of around 13dB
Key components:
MGA-86576
BFCN-8450+
LTC5549
ADF4351
ADM7150/1
ATtiny85-20S
PCB
Gerber files are included, PCB's can be ordered at JCL PCB substrate thickness is 0.6mm
73's Maarten PA0MHE
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C15, C16, C17, C30, C31, C32, C33, C34 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C21, C22, C24, C26 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C6, C11, C27 |
| 3 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23, C25, C28 |
| 2 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C37 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C12 |
| 2 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R23 |
| 2 | 6p8 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C38, C40 |
| 2 | SO | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | U2, U12 |
| 1 | +12V | Maarten_Kicad6:SolderWirePad_single_SMD_4x5mm | J1 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 100u | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L21 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 10n | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L3 |
| 1 | 12K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 150n | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L4 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C29 |
| 1 | 2K2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | 2p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 3n3 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C36 |
| 1 | 3n9 | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L22 |
| 1 | 470p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C39 |
| 1 | 47n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C35 |
| 1 | 56R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 5K1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 5p6 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | ADF4351 | Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm_ThermalVias | U22 |
| 1 | ADM7150 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U15 |
| 1 | ATtiny85-20S | Package_SO:SOIC-8W_5.3x5.3mm_P1.27mm | U21 |
| 1 | BFCN-8450+ | Maarten_Kicad6:BFCN-8450 | U5 |
| 1 | BLM18GG471SN1D | Inductor_SMD:L_0201_0603Metric_Pad0.64x0.40mm_HandSolder | L1 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D21 |
| 1 | LO-In | Maarten_Kicad6:SMA_side_PCB | J4 |
| 1 | LTC5549 | Maarten_Kicad6:QFN-12-UDB Var A 3.5x2.5mm | U11 |
| 1 | MGA-86576 | Maarten_Kicad6:MGA-86576 | U1 |
| 1 | PGA103+ | Package_TO_SOT_SMD:SOT-89-3 | Q1 |
| 1 | RF out | Maarten_Kicad6:SMA_side_PCB | J3 |
| 1 | RF-In | Maarten_Kicad6:SMA_side_PCB | J2 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | printedC | Maarten_Kicad6:PrintedC | C7 |
| 1 | ~ | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP21 |
The 65 most common of 68 parts.
Similar boards
- 2 layers142.8 × 120.9 mm

- 4 layers100 × 100 mm

- 2 layers118.5 × 94.5 mm

WaveLab24GHz
PA0MHE/Wavelab-24G-Addon-module
Can be used as addon module for the Wavelab 23X1008XP module, which was available during the 2021-2022 timeframe on www.ebay.pl seller:bisonelectronics-sp2jyr The module converts the first-IF 2364MHz to 432MHz (or…
207 parts5MIT - 2 layers

Circular PCB
ChowdaryManyam/ATtiny-Chainy
As an OSHWA-certified project, ATtiny-Chainy adheres to the open-source hardware definition, ensuring transparency, collaboration, and accessibility for the maker community.
24 parts1MIT - 2 layers78.3 × 78.5 mm

- 2 layers47.4 × 40.9 mm

- 2 layers82.1 × 82.1 mm

Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0 - 4 layers40 × 33 mm

Version 2.0
EObianom/ADF4351
This repository is for ADF4351 registory calculation and hardware design.
50 parts2MIT
Questions
How big is the 8-4GHzDSN V2 PCB?
It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 8-4GHzDSN V2 use?
68 parts, built around the ATTINY85-20SU, PGA103U, ADF4351BCP and BFCN-8450+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 8-4GHzDSN V2 KiCad files?
From the PA0MHE/8-4GHz_DSN repository on GitHub, at the commit this page was made from: the board is Kicad6/8-4GHzDSN_V2.kicad_pcb and its schematic Kicad6/8-4GHzDSN - Copy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 8-4GHzDSN V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask PA0MHE before reusing the design.