
ECE445L RSLK V2
andyMath7745/JustDance-TinyML-Embedded
Inspired by the game Just Dance, a DIY Embedded System to classify user gestures and simulate 2-player gameplay

Electronic schematics for the Pheeno robot!
PCB design files is an open-source printed circuit board by ACSLaboratory, from the ACSLaboratory/pheeno_robot_electronic_schematics repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 114.3 × 114.3 mm with 75 parts on 78 nets, routed with 717 tracks and 0 vias.
It is built around the GP2Y0A41SK0F, LP2950-33 and IRF9530. Its parts include 23 capacitors, 16 resistors, 9 connectors, 7 ICs and 2 switches. It belongs with the robots and motor control boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
This is the ACSLab GitHub repository for the files relating to the electronic construction of the Pheeno robot platform. Pheeno is designed to be an inexpensive (cost of parts = $420), research-level platform for multi-robot experiments, robotics education, and outreach activities. This repository will be updated with additional modules, code, and improvements to existing modules as they are developed.
Thanks for checking out the robot!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitors_ThroughHole:C_Rect_L7_W2_P5 | C3, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17 |
| 7 | 10k | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R9, R14, R15, R16, R17, R18, R19 |
| 7 | 10uF | PheenoFootprintsV2:C_Radial_D4_P1.5 | C6, C18, C19, C20, C21, C22, C23 |
| 6 | GP2Y0A41SK0F | PheenoFootprintsV2:GP2Y0A41SK0F | IRB1, IRF1, IRL1, IRLF1, IRR1, IRRF1 |
| 5 | OKI-78SR | PheenoFootprintsV2:OKI-78SR | U2, U3, U4, U5, U7 |
| 3 | 49.9k | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R2, R3, R5 |
| 2 | 1M | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R4, R6 |
| 2 | 1uF | Capacitors_ThroughHole:C_Rect_L7_W2_P5 | C1, C2 |
| 2 | AdaFruit_TB6612 | PheenoFootprintsV2:AdaFruit_TB6612 | MD1, MD2 |
| 1 | 1000uF | Capacitors_ThroughHole:C_Radial_D10_L25_P5 | C4 |
| 1 | 11.1V | Pin_Headers:Pin_Header_Straight_1x02 | BT1 |
| 1 | 121 | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R7 |
| 1 | 12V Power | PheenoFootprints:Molex_KK-6410-02_02x2.54mm_Straight | P1 |
| 1 | 30k | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R8 |
| 1 | 470uF | Capacitors_ThroughHole:C_Radial_D10_L16_P5 | C5 |
| 1 | 499 | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R10 |
| 1 | 61.9k | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R1 |
| 1 | Camera Servo Control | Pin_Headers:Pin_Header_Straight_1x03 | P4 |
| 1 | Color Control GPIO | Sockets_MOLEX_KK-System:Socket_MOLEX-KK-RM2-54mm_Lock_3pin_straight | P3 |
| 1 | GPIO JUMPER | Pin_Headers:Pin_Header_Straight_1x04 | P9 |
| 1 | ICL7611 | PheenoFootprintsV2:ICL7611 | OA1 |
| 1 | IRF9530 | PheenoFootprintsV2:IRF9530 | Q1 |
| 1 | LED | PheenoFootprintsV2:Molex_KK-6410-02_02x2.54mm_Straight | D1 |
| 1 | LHBridge_Left Motor Connector | Connectors_Molex:Molex_KK-6410-06_06x2.54mm_Straight | P8 |
| 1 | LHBridge_Right Motor Connector | Connectors_Molex:Molex_KK-6410-06_06x2.54mm_Straight | P7 |
| 1 | LOGO | PheenoFootprintsV2:ACS-Logo | G*** |
| 1 | LP2950 | PheenoFootprintsV2:LP2950 | U1 |
| 1 | MainPowerSwitch | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | SW1 |
| 1 | Pololu_MinIMU_v5 | PheenoFootprintsV2:Pololu_MiniIMU_v5 | IMU1 |
| 1 | RHBridge_Left Motor Connector | Connectors_Molex:Molex_KK-6410-06_06x2.54mm_Straight | P6 |
| 1 | RHBridge_Right Motor Connector | Connectors_Molex:Molex_KK-6410-06_06x2.54mm_Straight | P5 |
| 1 | RPi_PowerSwitch | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | SW2 |
| 1 | Raspberry Pi Power | Pin_Headers:Pin_Header_Straight_1x02 | P2 |
| 1 | Teensy3.2 | PheenoFootprintsV2:Teensy3.2 | U6 |
The 71 most common of 75 parts.

andyMath7745/JustDance-TinyML-Embedded
Inspired by the game Just Dance, a DIY Embedded System to classify user gestures and simulate 2-player gameplay


tanai-prathapam/lab4_445L_personal
The hw folder should contain your schematic and board files for your PCB or circuits. In labs 3-10, you will be creating schematics for your circuit in KiCad.

carr-james/cem3340-vco
A clone of Kassutronics 3340. Entirely for the purpose of learning how to build a Eurorack module, start to finish.


uel/temperature-indicator
A 44 component rugged temperature-indicating PCB using solar power and a supercapacitor. Board is designed to fit in a durable and cost efficent enclosure (PET bottle prefab) and sized exactly to the solar panel.

InfernoEmbedded/onewire-softdevice
Software, Firmware & Documentation is licensed under GPLv3

sixeight7/VController_v3
Production model of the VController, VC-mini and VC-touch
It measures 114.3 × 114.3 mm and has 2 copper layers, 1.6 mm thick.
75 parts, built around the GP2Y0A41SK0F, LP2950-33 and IRF9530. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ACSLaboratory/pheeno_robot_electronic_schematics repository on GitHub, at the commit this page was made from: the board is PCB_design_files/MainBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).