2 layers152.4 × 81.3 mm
LEDCube ESP32-C6 V2
97Cweb/Old-LEDCube
All the files from the LEDCube project, save for the library
59 parts
2 layers72.4 × 142.2 mm
LEDCube V2
97Cweb/Old-LEDCubeAll the files from the LEDCube project, save for the library
- Size
- 72.4 × 142.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 88
- Pads
- 210
- Tracks, vias
- 284, 109
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 Aug 2026
- Updated
- 9 Aug 2026
Overview
LEDCube V2 is an open-source printed circuit board by 97Cweb, from the 97Cweb/Old-LEDCube repository on GitHub. It is a 2-layer board of 72.4 × 142.2 mm with 33 parts on 88 nets, routed with 284 tracks and 109 vias.
It is built around the MAX6971ANG+, IRF9530NPBF and IRF9540NS. Its parts include 8 resistors, 7 capacitors, 7 connectors, 4 ICs and 4 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3README
README.md#LEDCube parts
the old LEDCube parts, minus the working library
This contains kicad board files, the early arduino codes, the box that the cube sits on, and some sample videos.
Next draft of cube will be with Beeton
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6, R7, R8 |
| 4 | 0.1uF | User_Library:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C6 |
| 3 | 360 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 3 | Conn_01x16_Female | Connector_JST:JST_XH_B16B-XH-A_1x16_P2.50mm_Vertical | J1, J2, J3 |
| 3 | IRF9530NPBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q4 |
| 3 | MAX6971ANG+ | MAX6971ANG:DIP794W47P254L3213H457Q24 | U1, U2, U3 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5, C7 |
| 2 | Conn_01x03_Female | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5, J7 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2 |
| 1 | 0.1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Buck_Boost_Converter | User_Library:BuckBoost_Converter | U7 |
| 1 | Conn_01x02_Female | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Conn_01x04_Female | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | IRF9540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q3 |
Questions
How big is the LEDCube V2 PCB?
It measures 72.4 × 142.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LEDCube V2 use?
33 parts, built around the MAX6971ANG+, IRF9530NPBF and IRF9540NS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEDCube V2 KiCad files?
From the 97Cweb/Old-LEDCube repository on GitHub, at the commit this page was made from: the board is KiCad/LEDCube V2/LEDCube V2/LEDCube V2.kicad_pcb and its schematic KiCad/LEDCube ESP32-C6 V1/LEDCube ESP32-C6 V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEDCube V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask 97Cweb before reusing the design.
More from 97Cweb/Old-LEDCube
5- 2 layers152.4 × 81.3 mm
LEDCube ESP32-C6 V1
97Cweb/Old-LEDCube
All the files from the LEDCube project, save for the library
42 parts - 2 layers72.4 × 151.1 mm
- 2 layers63.5 × 137.2 mm
- 2 layers
Line In Daughter
97Cweb/Old-LEDCube
All the files from the LEDCube project, save for the library
5 parts
Similar boards
- 2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers
- 2 layers102 × 72 mm
HF PA Combined
kholia/HF-PA-v6
RF "Lego" blocks. Quite-Linear HF broadband RF amplifier experiments for higher bands.
40 parts11 - 4 layers98.5 × 82 mm
Pico2lvds
ceteras/PicoLVDS
Tested with B089AW01-V.0 and HSD089IFW1-A00-V1.0 on a breadboard. I'm sure it will work with other displays from old netbooks.
43 parts7GPL-3.0 - 2 layers99.7 × 80 mm
6502fast3io
gfoot/fastpdip6502
Fast PDIP-only 6502-based homebrew computer - code and hardware design sources
56 parts7Unlicense - 2 layers50.8 × 38.1 mm
Powercontrol
gfoot/powercontrolcircuit
A soft power supply circuit with tunable overcurrent cutoff
19 parts6Unlicense - 4 layers92 × 95 mm
- 2 layers
Weller loddestasjon
kagjerde/Arduino-based-soldering-station
This is an Arduino soldering station using Weller RT soldering tips
34 parts5