2 layers229.9 × 111.8 mm
2 layers41 × 14 mm
96boards uart
96boards/96boards-uart1396Boards UART adapter hardware design files
- Size
- 41 × 14 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 30
- Pads
- 129
- Tracks, vias
- 345, 31
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Aug 2015
- Updated
- 8 Dec 2022
Overview
96boards uart is an open-source printed circuit board by 96boards, from the 96boards/96boards-uart repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 41 × 14 mm with 31 parts on 30 nets, routed with 345 tracks and 31 vias.
It is built around the FT230XS-R and S8050. Its parts include 11 resistors, 7 capacitors, 4 diodes, 4 connectors and 2 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
2Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 220R | kicad-gcl:R_0603_Seeed | R3, R4, R7, R8 |
| 3 | 1uF | Capacitors_SMD:C_0603 | C1, C2, C3 |
| 2 | 100nF | Capacitors_SMD:C_0603 | C4, C7 |
| 2 | 10k | kicad-gcl:R_0603_Seeed | R6, R11 |
| 2 | 22R | kicad-gcl:R_0603_Seeed | R9, R10 |
| 2 | 39pF | Capacitors_SMD:C_0603 | C5, C6 |
| 1 | +5V | kicad-gcl:LED-0603 | D2 |
| 1 | 1k | kicad-gcl:R_0603_Seeed | R5 |
| 1 | 390R | kicad-gcl:R_0603_Seeed | R1 |
| 1 | 620R | kicad-gcl:R_0603_Seeed | R2 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | J3 |
| 1 | CONN_02X03 | kicad-gcl:Pin_Header_SMD_2x03_Pitch2mm | J1 |
| 1 | CONN_20X2 | kicad-gcl:Socket_Strip_SMD_2x20_Pitch2mm | J2 |
| 1 | FT230XS-R | kicad-gcl:SSOP-16_3.9x4.9mm_Pitch0.635mm_Seeed | U2 |
| 1 | OSHW-logo_silkscreen-front_3mm | OSHW-logo_silkscreen-front_3mm | G*** |
| 1 | REG_1.8V | kicad-gcl:SOT-23_Seeed | U1 |
| 1 | RST | kicad-gcl:SW_PUSH_DTSM_62K | SW1 |
| 1 | RX | kicad-gcl:LED-0603 | D3 |
| 1 | S8050 | kicad-gcl:SOT-23_Seeed | Q1 |
| 1 | TX | kicad-gcl:LED-0603 | D4 |
| 1 | USER | kicad-gcl:LED-0603 | D1 |
| 1 | ~ | kicad-gcl:USB_MICRO_B_ST-USB-001E | P1 |
Questions
How big is the 96boards uart PCB?
It measures 41 × 14 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 96boards uart use?
31 parts, built around the FT230XS-R and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 96boards uart KiCad files?
From the 96boards/96boards-uart repository on GitHub, at the commit this page was made from: the board is 96boards-uart.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 96boards uart design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers203.2 × 149.9 mm
- 2 layers77.5 × 40.6 mm
Link adapter
jkominek/piano-conversion
Hardware, and some firmware, for acoustic piano to MIDI controller conversion.
42 parts53 - 4 layers62 × 42 mm
- 4 layers65 × 56 mm
Copilot Lite
BayLibre/Copilot
Manage a DUT power and serial through a single USB port, no additional software required.
80 parts22MIT - 2 layers48.2 × 49.3 mm
Nixie pipe
tuna-f1sh/nixiepipe-hardware
Hardware design files and firmware for my Nixie Pipe modules
49 parts19 - 2 layers120 × 98 mm
BioAmp v1.1.0
prototipado/bioamp
BioAmp is an opensource project of a multichannel biopotential adquisition system for EEG, EMG, EOG and EOG signals.
139 parts16 - 2 layers67.3 × 25.4 mm
UPDI programmer
dbuchwald/kicad-simple
Simple designs in KiCAD that do not require separate projects
32 parts10MIT