2 layers155 × 114 mm
IOExpansion
ja1umi/MUTIF09Project
Various design materials for building my 8-bit-microprocessor-based single board computer(s)
198 parts10MIT
2 layers100 × 85 mm
LED 16x24V REG4 VERSION B
80morpheus/KNX_DimmerW = Single CW = Cold/Warm White RGB = RGB RGBW = RGB+White RGBCW = RGB+Cold/Warm White
- Size
- 100 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 71
- Pads
- 229
- Tracks, vias
- 323, 39
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Sep 2024
- Updated
- 20 Oct 2024
Overview
LED 16x24V REG4 VERSION B is an open-source printed circuit board by 80morpheus, from the 80morpheus/KNX_Dimmer repository on GitHub. It is a 2-layer board of 100 × 85 mm with 78 parts on 71 nets, routed with 323 tracks and 39 vias.
It is built around the PCA9685PW, ADUM1250AR and IRF3205. Its parts include 35 resistors, 16 transistors, 16 fuses, 5 connectors and 3 capacitors.
Main components
3README
README.mdKNX Dimmer
up to 16 channels possible depends on the configuration
W = Single CW = Cold/Warm White RGB = RGB RGBW = RGB+White RGBCW = RGB+Cold/Warm White
Possible outputs: 3X RGBCW or 4x RGBW or 5X RGB or 8X CW or 16X W
CH1 S CW RGB RGBW RGBCW
CH2 S CW RGB RGBW RGBCW
CH3 S CW RGB RGBW RGBCW
CH4 S CW RGB RGBW
CH5 S CW RGB
CH6 S CW
CH7 S CW
CH8 S CW
CH9 S
CH10 S
CH11 S
CH12 S
CH13 S
CH14 S
CH15 S
CH16 S
dimm bedingung
wenn abs oder rel dimmen dann nur bis min wert wenn ausschalten, dann aus und optional farbwerte auf standard zurück setzen
single ist easy -> zwischen min und max
cw -> ginge auch zwischen min und max cw werte ??? müßte zwei min um evtl aus zu vermeiden ets eingabe farbtemp für c + w ets regler für temperatur gibt prozentual an welche der beiden wo steht links = nur c wird gesteuert und w ist dann 0 mitte = beide selber wert rechts = nur w wird gesteuert und c ist dann 0
rgb -> dimmt nur von 0 bis setpoint min wert macht keinen sinn da dann zu komplizierte berechnungen
rgbw -> siehe rgb wie wird w behandelt ??? einzelnes licht objekt
rgbcw -> wie wird c und w behandelt ??? einzelnes licht objekt ets eingabe farbtemp für c + w ets standard wert - wird nach aus wieder aktiv ja/nein rgb dimmt von 0 bis setpoint
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | R | Resistor_SMD:R_0805_2012Metric | R1, R11, R12, R101, R102, R111, R112, R121, R122, R131, R132, R141, R142, R151, R152, R161 +17 |
| 16 | Fuse | Fuse:Fuse_0402_1005Metric | F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, F16 |
| 16 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 4 | Conn_01x08 | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_8-G-5,08_1x08_P5.08mm_Vertical | J1, J2, J3, J4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 1 | 0.1µF | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 0.33µF | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 100µF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | ADuM1250 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Conn_01x02 | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_Vertical | J5 |
| 1 | L7806 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | PCA9685PW | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U100 |
Questions
How big is the LED 16x24V REG4 VERSION B PCB?
It measures 100 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LED 16x24V REG4 VERSION B use?
78 parts, built around the PCA9685PW, ADUM1250AR and IRF3205. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED 16x24V REG4 VERSION B KiCad files?
From the 80morpheus/KNX_Dimmer repository on GitHub, at the commit this page was made from: the board is hardware/LED_16x24V_REG4_VERSION_B.kicad_pcb and its schematic hardware/LED_16x24V_REG4_VERSION_B.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED 16x24V REG4 VERSION B design in my own project?
Its repository states no licence, so its author keeps all rights: ask 80morpheus before reusing the design.
Similar boards
- 2 layers175 × 172.2 mm
- 2 layers38.5 × 59 mm
- 4 layers100 × 77 mm
- 2 layers100 × 100 mm
- 2 layers48 × 32.4 mm
I2c signal isolator
juarendra/Open-Embedded-Breakouts
Collection of open-source embedded breakout board designs (KiCad). I2C Signal Isolator, and more.
27 parts - 2 layers90 × 68.3 mm
MakerLab
LycosNoctis/F.A.R.M
Filabot Automatic Recycling Machine (FARM): a closed-loop embedded system for automated plastic recycling and filament production.
42 parts - 2 layers119.4 × 119.4 mm
Esp32-pool controller
niko34/esp32-pool-controller
Contrôleur automatique de piscine ESP32 avec gestion pH, ORP, température, filtration, éclairage, app web locale, MQTT (HomeAssistant auto-discovery), API
93 partsMIT