

Usb switch adapter
74th のPCBデータを公開しているプロジェクト
- Size
- 20.3 × 33.3 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 14
- Nets
- 27
- Pads
- 79
- Tracks, vias
- 150, 102
- Pours
- 87
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 May 2024
- Updated
- 30 Mar 2026
Overview
Usb switch adapter is an open-source printed circuit board by 74th, from the 74th/74th-oshw-projects repository on GitHub, published under the MIT licence. It is a 2-layer board of 20.3 × 33.3 mm with 14 parts on 27 nets, routed with 150 tracks and 102 vias.
It is built around the CH32V003J4M6 and CH217K. Its parts include 2 resistors, 2 ICs, 2 connectors, 1 capacitor and 1 diode. It belongs with the interfaces and adapters boards and the RISC-V boards of this library.
Main components
2CH32V003J4M6
SOP-8SOP-8 Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)CH217K
SOT-23-6-40℃~+85℃ 1 2.7A 2.7V~5.5V 70mΩ Active Low Load Switch Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over temperature protection(OTP) SOT-23-6 Power Distribution Switches ROHSWCH (Nanjing Qinheng Microelectronics)Power Distribution Switches
README
74TH-G049-grove_qwiic_debug_adapter/README.mdGrove と qwiic の信号を読み取るアダプタ

- Grove と qwiic の信号を読み取るアダプタです
v1.0.0
BOM
| Reference | Name | Quantity |
|---|---|---|
| CH1,CH2 | HY2.0 Socket SMD 4Pin (Grove) - Grove | 2 |
| CH4,CH5 | SH1.0 Socket SMD 4Pin (Qwiic) - Qwiic | 2 |
| C1,C2 | Capacitor 0603 100nF | 2 |
| R1,R2 | Register 0603 1kΩ | 2 |
| U1 | Regulator 3.3V SOT-23 AP7333-33SAG | 1 |
- I2C としてプルアップが必要ない場合、C1、C2、R1、R2、U1 は不要です
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Hole_M2_2.0 | 74th:Hole_M2_2.0 | M2, M2, M2 |
| 1 | 100n | 74th:Capacitor_0603_1608 | C1 |
| 1 | 10k | 74th:Register_0603_1608 | R2 |
| 1 | 56k | 74th:Register_0603_1608 | R1 |
| 1 | Blue | 74th:LED_BACK_0805_2012 | D1 |
| 1 | CH217K | 74th:Package_SOT-23-6 | U1 |
| 1 | CH32V003J4M6 | 74th:Package_SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LOGO | 74th:Logo_74th_5mm | MISC-ICON |
| 1 | SWD 1Wire | 74th:PinOut_Pin_3_3GND | CH1 |
| 1 | SW_Push | 74th:Switch_MXChoc_1.0u | SW1 |
| 1 | USB-C Plug | 74th:Connector_USB-C-Plug_24-Pin | J1 |
| 1 | USB2.0-C_SMT | 74th:Connector_USB-C-Receptacle_SMT_12-Pin_MidMount | J2 |
More from 74th/74th-oshw-projects
12- 2 layers53.5 × 69.5 mm

- 2 layers34.3 × 39.4 mm

- 2 layers33 × 22.9 mm

- 2 layers70 × 20.5 mm

- 2 layers20 × 42.4 mm

- 2 layers92.5 × 22 mm

- 2 layers36 × 23 mm

- 2 layers19 × 37.1 mm

- 2 layers50 × 54 mm

- 2 layers13.5 × 65 mm

- 2 layers14.7 × 32 mm

- 2 layers34.3 × 14 mm

Similar boards
- 2 layers14.2 × 26 mm

Usb auto reboot
74th/usb-rebooter
We would appreciate it if you would not sell them. 販売はしないでいただけるとありがたいです。
11 parts1MIT - 2 layers19 × 28.5 mm

Stickpointv ch32v003-v1.1.0-pcb
74th/stickpoint-firmware
Pointer module with joystick (PIM447 Compatible)
16 parts16MIT - 2 layers50 × 50 mm

INNER PCB
KaiPereira/Alchemical-Cosmological-Badges
These are alchemical-cosmological PCB hackathon badges I designed in a day for the Fallout hackathon in Shenzhen, China.
73 parts12 - 2 layers78 × 57 mm

- 2 layers67 × 92 mm

Windmeter modbus interface
pe1mew/windmeters-modbus-interface
Universal interface for cup-anemo- and wind-directon- sensor to modbus
30 parts2 - 2 layers50.5 × 18 mm

Continuity
tvecera/ch32-projects
A collection of example projects and experiments for CH32-series microcontrollers from WCH (Nanjing Qinheng Microelectronics).
20 parts2MIT - 2 layers200 × 100 mm

Panelize
hasankarainfo/PCutSpeedCTRL
It provides constant speed operation and remote control of single phase AC motor suitable for operation with 220 vac 50hz. When produced with BTA41 triac switching element, it provides usage up to 40 Ampere.
556 parts1Apache-2.0 - 2 layers10.2 × 29.8 mm

Questions
How big is the Usb switch adapter PCB?
It measures 20.3 × 33.3 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Usb switch adapter use?
14 parts, built around the CH32V003J4M6 and CH217K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb switch adapter KiCad files?
From the 74th/74th-oshw-projects repository on GitHub, at the commit this page was made from: the board is 74TH-G053-usb_switch_adapter/usb_switch_adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb switch adapter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).