
QWIIC adapter
4project-co-il/PlugAndPlay-QWIIC_Adapter
Plug-n-Play adapter for QWIIC and STEMMA QT products

Plug-n-Play adapter for QWIIC and STEMMA QT products
Panel is an open-source printed circuit board by 4project-co-il, from the 4project-co-il/PlugAndPlay-QWIIC_Adapter repository on GitHub, published under the MIT licence. It is a 2-layer board of 114 × 96.5 mm with 262 parts on 150 nets, routed with 1,900 tracks and 300 vias.
It is built around the M24C02-FMN6TP, 0603WAF1002 and CC0603KRX7R9BB104, with the ZX-SH1.0-4PWT, ZX-SH1.0-6PWT and X6511FRS-02-C85D30 among its other parts. Its parts include 100 connectors, 50 resistors, 25 capacitors and 25 ICs.
This is the repository with the files for PlugAndPlay adapter for QWIIC/STEMA QT devices.
That module allows connecting QWIIC/STEMA QT devices to the Plug-n-Play system with the JST-SH 4/6pin cables and includes also a 2pin female header that allows connection of the 2 interrupt lines that is used by the Plug-n-Play system. The 2 interrupt lines are available as 2 solder holes as well, for those who are interested in a more permanent connection.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +34 |
| 25 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +9 |
| 25 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4 +9 |
| 25 | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 +9 |
| 25 | JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +9 |
| 25 | M24C02-FMN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 +9 |
| 25 | ~ | PnP_Library:PinHeader_1x02_P2.54mm_Horizontal_SMD | J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3 +9 |
| 8 | Fiducial | Fiducial | KiKit_FID_B_1, KiKit_FID_B_2, KiKit_FID_B_3, KiKit_FID_B_4, KiKit_FID_T_1, KiKit_FID_T_2, KiKit_FID_T_3, KiKit_FID_T_4 |
| 4 | NPTH | NPTH | KiKit_TO_1, KiKit_TO_2, KiKit_TO_3, KiKit_TO_4 |
The 212 most common of 262 parts.

4project-co-il/PlugAndPlay-QWIIC_Adapter
Plug-n-Play adapter for QWIIC and STEMMA QT products








It measures 114 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
262 parts, built around the M24C02-FMN6TP, 0603WAF1002, CC0603KRX7R9BB104 and ZX-SH1.0-4PWT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 4project-co-il/PlugAndPlay-QWIIC_Adapter repository on GitHub, at the commit this page was made from: the board is panel.kicad_pcb and its schematic QWIIC_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).