

2Buttons Input
Plug-n-Play 2 buttons input module
- Size
- 46.2 × 30.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 8
- Pads
- 52
- Tracks, vias
- 67, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 May 2025
- Updated
- 14 Oct 2026
Overview
2Buttons Input is an open-source printed circuit board by 4project-co-il, from the 4project-co-il/PlugAndPlay-2Buttons_Input repository on GitHub, published under the MIT licence. It is a 2-layer board of 46.2 × 30.2 mm with 19 parts on 8 nets, routed with 67 tracks and 12 vias.
It is built around the M24C02-FMN6TP, CC0603KRX7R9BB104 and 0603WAF1002, with the 0603WAF1001, 0603WAF2201 and TS-1094TS-B2D2-T-Y among its other parts. Its parts include 6 resistors, 3 capacitors, 2 switches, 1 IC and 1 connector.
Main components
7M24C02-FMN6TP
SOIC-8-40℃~+85℃ 1.7V~5.5V 200 Years 2Kbit 4,000,000 Cycles 400kHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROMCC0603KRX7R9BB104
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT0603WAF1002
0603-55℃~+155℃ 100mW 10kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount0603WAF1001
0603-55℃~+155℃ 100mW 1kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount0603WAF2201
R0603-55℃~+155℃ 100mW 2.2kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface MountTS-1094TS-B2D2-T-Y
SMD-4P,12x12mmTactile SwitchesYuandiZX-SH1.0-6PWT
SMD,P=1mm,卧贴-40℃~+85℃ 1 1A 1mm 1x6P 3.15mm 4.3mm 50V 6 6P 8.35mm Auxiliary Solder Pin Beige Brass LCP SH Surface Mount, Right Angle Tin SMD,P=1mm,卧贴 Wire To Board Connector ROHSMegastarWire To Board Connector
README
README.mdPlugAndPlay: Input module with 2 buttons
This is the repository with the files for PlugAndPlay input module with 2 buttons
That module has 2 buttons, connected to the 2 interrupt lines and configured to provide interrupt on any change of the button state.
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R4 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx43PSMTR | SW1, SW2 |
| 1 | JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J1 |
| 1 | M24C02-FMN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
The 13 most common of 19 parts.
More from 4project-co-il/PlugAndPlay-2Buttons_Input
1- 2 layers198.8 × 134.8 mm

Similar boards
- 2 layers114 × 96.5 mm

Panel
4project-co-il/PlugAndPlay-QWIIC_Adapter
Plug-n-Play adapter for QWIIC and STEMMA QT products
262 partsMIT - 2 layers101.4 × 69.4 mm

- 4 layers76 × 100 mm

- 8 layers120 × 100 mm

- 2 layers50 × 75 mm

- 4 layers80 × 50.5 mm

- 2 layers130 × 164 mm

- 2 layers72 × 60 mm

Jewelled lc1 chargerProgrammer
matthiasnowak/jewelled
This is a panel meant for production of the Earrings, allowing for 2 Earrings per panel.
119 parts3
Questions
How big is the 2Buttons Input PCB?
It measures 46.2 × 30.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 2Buttons Input use?
19 parts, built around the M24C02-FMN6TP, CC0603KRX7R9BB104, 0603WAF1002 and 0603WAF1001. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2Buttons Input KiCad files?
From the 4project-co-il/PlugAndPlay-2Buttons_Input repository on GitHub, at the commit this page was made from: the board is 2Buttons_Input.kicad_pcb and its schematic 2Buttons_Input.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2Buttons Input design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).