Skip to the content
2 layers131 × 66 mmAwas pt2, the printed circuit board in 3D

Sistem IoT kendali otomatisasi katup air Solenoid 12V berbasis ESP32. Desain PCB mandiri menggunakan driver internal MOSFET IRF540N horizontal, proteksi flyback diode 1N4007, dan sirkuit penurun tegangan step-down LM2596 untuk efisiensi ruang dan keandalan sakelar elektronik jangka panjang.

Size
131 × 66 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
42
Pads
84
Tracks, vias
188, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
14 Jun 2026
Updated
14 Jun 2026

Overview

Awas pt2 is an open-source printed circuit board by 404notfound-han, from the 404notfound-han/PCB-Awwaz repository on GitHub. It is a 2-layer board of 131 × 66 mm with 21 parts on 42 nets, routed with 188 tracks and 0 vias.

It is built around the BC547 and IRF540N. Its parts include 11 connectors, 4 resistors, 2 diodes and 2 transistors. It belongs with the ESP32 boards of this library.

Main components

2

Parts

21
QtyValueFootprintReferences
21N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2
2ESP32 DevKitC V4 (38 Pin)Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_VerticalJ1, J2
1100 OhmResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
110k OhmResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1BC547Package_TO_SOT_THT:TO-92_InlineQ1
1CCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm100nF1
1C_PolarizedCapacitor_THT:CP_Radial_D6.3mm_P2.50mm100uF1
1GND_UTAMAConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ7
1IN+ LM2596Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ4
1IN- LM2596Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ5
1IRF540NPackage_TO_SOT_THT:TO-220-3_Horizontal_TabDownQ2
1Konektor LCD I2C - 4 PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ9
1Konektor RFID RC522 - 8 PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ8
1POWER_IN_12VTerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_HorizontalJ3
1VCC_5VConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ6
1Water Flow Sensor - 3 PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ11
1Water ValveTerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_HorizontalJ12

Similar boards

  • 2 layers57.2 × 53 mmBulbs, the printed circuit board in 3D

    Bulbs

    imjah/bulbs

    Ambient lighting system

    11 parts1GPL-3.0
  • 2 layers155 × 70.1 mm4S BMS Arduino Shield autor, the printed circuit board in 3D

    4S BMS Arduino Shield autor

    Aassimrepo/4S-BMS-Proteus-KiCad

    Simulation and PCB design of a 4S Battery Management System using Proteus, Arduino and KiCad.

    69 parts
  • 2 layers254.1 × 139.2 mmMain Project, the printed circuit board in 3D

    Main Project

    Izaakthegreat/UofG_TDP3_TeamYes

    UofG TDP3 repo for KiCAD files and code

    83 parts
  • 2 layersMosfet, the printed circuit board in 3D

    Mosfet

    LabStorm/easy-modular-electronics

    A library of tiny interconnectable modules to create electronics system.

    9 partsGPL-3.0
  • 2 layers83.7 × 90.3 mmIncubator Quetta Client, the printed circuit board in 3D

    Incubator Quetta Client

    manhoosbilli1/Incubator_basic_esp32_modular_1_sided

    This contains an incubator pcb i've made for a client. his needs were specific so only added what he needed. a complete and complex version can be found in capibator organization.

    43 parts
  • 2 layers95.2 × 63.7 mmOpentribhw, the printed circuit board in 3D

    Opentribhw

    nurbano/opentribhw

    Este proyecto presenta una plataforma abierta y de bajo costo para la instrumentación, medición y control en ensayos tribológicos de tipo Pin-on-Disk y Block-on-Ring.

    38 parts
  • 2 layers47 × 49.5 mmAttiny85leddimmer, the printed circuit board in 3D

    Attiny85leddimmer

    RoboUlbricht/kicad_attiny85_led_dimmer

    31 parts

Questions

How big is the Awas pt2 PCB?

It measures 131 × 66 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Awas pt2 use?

21 parts, built around the BC547 and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Awas pt2 KiCad files?

From the 404notfound-han/PCB-Awwaz repository on GitHub, at the commit this page was made from: the board is Awas pt2.kicad_pcb and its schematic Awas pt2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Awas pt2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask 404notfound-han before reusing the design.