
PixelWave
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

A mains-powered, adjustable bench power supply designed in KiCad, converting 120V AC wall input into a regulated 1–20V DC output.
Benchpsu is an open-source printed circuit board by 3stan-H, from the 3stan-H/Bench-Power-Supply repository on GitHub. It is a 2-layer board of 85.5 × 51 mm with 33 parts on 43 nets, routed with 189 tracks and 6 vias.
It is built around the R-78C5.0-1.0, XL4016E1 and GBU1010, with the SS34 among its other parts. Its parts include 10 capacitors, 6 resistors, 5 connectors, 3 ICs and 2 diodes. It belongs with the power boards and the AVR (ATmega, ATtiny) boards of this library.
This folder contains the project files for the Bench PSU through KiCad 10.0 as well as the BOM which represents the materials and components needed for this project with the MPN refering to the digikey part number.
The BOM Also is missing a couple of things which include:
Keep in mind the schematic is missing some symbols which are present in "V2 Bench PSU KiCad 10.0 Files"
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C5, C10, C12 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C3, C4, C11 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R6 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2, J5 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J3, J4 |
| 1 | 0.1 | Resistor_SMD:R_2512_6332Metric | R3 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 1000u/25V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C7 |
| 1 | 100u | Inductor_SMD:L_0805_2012Metric | L3 |
| 1 | 100u/16V | Capacitor_SMD:CP_Elec_6.3x5.4 | C9 |
| 1 | 3.3k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 33n | Capacitor_SMD:C_0805_2012Metric | CFF1 |
| 1 | 4700u/50V | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C1 |
| 1 | 470u/50V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C6 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Connects to LCD | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J6 |
| 1 | GBU1010 | Diode_THT:Diode_Bridge_19.0x3.5x10.0mm_P5.0mm | D1 |
| 1 | INA219AxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | R-78C5.0-1.0 | Converter_DCDC:R-78C&slash_E-1.0_SIP3_11.6X8.5X10.4_RCP | U3 |
| 1 | SS34 | Diode_SMD:D_SMA | D3 |
| 1 | XL4016 | Package_TO_SOT_SMD:XL4016 | U1 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

rayvburn/diff_drive_mapping_robot
ROS driver for the Raspberry Pi based differential drive robot

Ramahabir/6-DOF-Robotics-Arm-Dynamixel
Open-source 6-DOF robot arm controller using STM32F411, Dynamixel servos, custom KiCad PCB, PWM gripper control, data logging, and planned ESP32-C3 wireless communication.



iamdarshg/edf-esc
Open hardware and firmware for a compact 98 mm × 58 mm, four-layer board with two independent 6S sensorless BLDC/EDF controller channels.

It measures 85.5 × 51 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the R-78C5.0-1.0, XL4016E1, GBU1010 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 3stan-H/Bench-Power-Supply repository on GitHub, at the commit this page was made from: the board is Bench PSU Kicad 10.0 Files/benchpsu.kicad_pcb and its schematic Bench PSU Kicad 10.0 Files/benchpsu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask 3stan-H before reusing the design.