2 layers85 × 21 mm
2 layers85 × 17 mm
3dsimo kit
3dsimo/3dsimo_kit78Visit us at 3D simo pages for more information
- Size
- 85 × 17 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 38
- Pads
- 191
- Tracks, vias
- 630, 71
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Jun 2018
- Updated
- 29 Jan 2022
Overview
3dsimo kit is an open-source printed circuit board by 3dsimo, from the 3dsimo/3dsimo_kit repository on GitHub. It is a 2-layer board of 85 × 17 mm with 44 parts on 38 nets, routed with 630 tracks and 71 vias.
It is built around the ATMEGA328P-MU, DRV8837DSG and KPA-3010CGCK, with the DMG2305UX and NX3008PBK among its other parts. Its parts include 14 resistors, 13 capacitors, 5 connectors, 4 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATMEGA328P-MU
HVQFN-32(5x5)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH VQFN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)
DRV8837DSG
WSON-8-EP(2x2)-40℃~+85℃ 1.8V~7V 1.9A 120nA 280mΩ Yes WSON-8-EP(2x2) Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor Drivers
KPA-3010CGCK
SMDSMD LED Indication - Discrete ROHSKingbrightLED Indication - Discrete
DMG2305UX
SOT-23-55℃~+150℃ 1 P-Channel 1.7W 190pF 1V 20V 4.1A 52mΩ@4.5V 7.8nC 740pF P-Channel SOT-23 MOSFETs ROHSTECH PUBLICMOSFETsNX3008PBK
SOT-23-55℃~+150℃ 1 P-Channel 1.14W 1.1V 230mA 30V 4.1Ω@4.5V 46pF 720pC@4.5V P-Channel SOT-23 MOSFETs ROHSNexperiaMOSFETs
README
README.md3Dsimo KIT information
Watch our PROMO video for 3Dsimo KIT 2 product
Visit us at 3D simo pages for more information
3D printed parts
This section includes information about all 3D printed plastic parts. Folder 3Dmodels includes all parts in STP and STL formats for both version of 3Dsimo KIT. You can download it and edited it as you want. If your models will be awsome, we can publish them here.
Hardware for 3Dsimo KIT
Electronics device is an essential part of the 3Dsimo KIT. Main board is a "heart" of the device and manage all functions such as heating, identification or extrusion.
Firmware for 3Dsimo KIT
Microcontroller requries a program which can run the device. 3Dsimo KIT has code written in C/C++ language in Arduino IDE and it is easy to edit.
Arduino nano
Information about Arduino Nano like development board.
Manuals
Manual for device operations and how to edit your Arduino Nano like development kit for 3Dsimo KIT.
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | passive:R_0603 | R1, R2, R11, R14, R15 |
| 4 | 100k | passive:R_0603 | R3, R7, R12, R13 |
| 4 | 22u/10V | passive:C_0805 | C4, C6, C7, C8 |
| 4 | C-100n/50V | passive:C_0603 | C1, C2, C5, C11 |
| 3 | 100R | passive:R_0603 | R4, R5, R6 |
| 2 | 100u_6.3V | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Reflow | C12, C13 |
| 2 | 10k | passive:R_0603 | R8, R10 |
| 2 | 12p | passive:C_0603 | C9, C10 |
| 2 | FiducialMark | Fiducials:AssemblyMark_1.0mm | J3, J4 |
| 2 | KPA-3010CGCK | LEDs:KPA-3010 | D1, D2 |
| 2 | TACTM-64N-F | Buttons_Switches_SMD:TACTM-64N-F | SW1, SW2 |
| 1 | 16MHz | Crystals:Crystal_SMD_3225-4pin_3.2x2.5mm | X2 |
| 1 | 1u/25V | passive:C_0603 | C3 |
| 1 | ATMEGA328P-MU | Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mm | U3 |
| 1 | CONN_02X05 | Connectors:Header_for_PCB_edge_2x5_2.54mm | J1 |
| 1 | CP2102N-QFN24 | Housings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mm | U4 |
| 1 | DMG2305UX | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | DRV8837 | Housings_DFN_QFN:VDFN-8-1EP_2x2mm_Pitch0.5mm | U1 |
| 1 | MCR-B-S-RA-TSMT-TR | Connectors_USB:MCR-B-S-RA-TSMT-TR | J2 |
| 1 | NX3008 | TO_SOT_Packages_SMD:SOT-363_SC-70-6 | Q2 |
| 1 | OLED_128x32_MODULE | Displays:OLED_MODULE_128x32_IIC | U2 |
| 1 | OSHW | Logo:OpenHW_6_9x7_3mm | X1 |
| 1 | TC2030-ISP | Connectors:Tag-Connect_TC2030-IDC-NL | P2 |
Questions
How big is the 3dsimo kit PCB?
It measures 85 × 17 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 3dsimo kit use?
44 parts, built around the ATMEGA328P-MU, DRV8837DSG, KPA-3010CGCK and DMG2305UX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 3dsimo kit KiCad files?
From the 3dsimo/3dsimo_kit repository on GitHub, at the commit this page was made from: the board is pcb/main/v201/3dsimo_kit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 3dsimo kit design in my own project?
Its repository states no licence, so its author keeps all rights: ask 3dsimo before reusing the design.
More from 3dsimo/3dsimo_kit
4- 2 layers31 × 14.1 mm
- 2 layers26.3 × 14.1 mm
- 2 layers26.3 × 17.1 mm
Similar boards
- 2 layers91.6 × 64.5 mm
Digit in board
borzeman/PzbElectronics
Репозиторий для поддержки версионирования при разработке плат для киоска.
221 parts - 4 layers76 × 100 mm
Power hub
kartben/hw-testing-rack
3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer
181 parts - 4 layers84.3 × 8.4 mm
- 2 layers30.5 × 38.5 mm
- 2 layers70.6 × 38 mm
- 2 layers51.5 × 89 mm
- 4 layers26 × 29 mm
- 2 layers116.5 × 60.3 mm
TalDoor
akaStanley/TalDoor
GatekeeperV2- POE powered NFC Door lock system using the PocketBeagle
67 parts14GPL-3.0