2 layers68 × 50 mm
2 layers120.5 × 96.5 mm
MainPCB
3DMIN/pushpull-kicad1kicad files for pushpull cirquit boards
- Size
- 120.5 × 96.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 89
- Pads
- 175
- Tracks, vias
- 238, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 Oct 2016
- Updated
- 26 Oct 2016
Overview
MainPCB is an open-source printed circuit board by 3DMIN, from the 3DMIN/pushpull-kicad repository on GitHub. It is a 2-layer board of 120.5 × 96.5 mm with 27 parts on 89 nets, routed with 238 tracks and 3 vias.
Its parts include 7 resistors, 6 ICs, 5 capacitors and 5 connectors.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1µ | Capacitors_SMD:C_1206 | C1, C2, C3, C4 |
| 4 | NEOPixel | Pushpull:NeoPixel_WS2812B | U1, U2, U3, U4 |
| 1 | 100 | Resistors_SMD:R_1206 | R7 |
| 1 | 470µ | Capacitors_SMD:c_elec_8x10 | C5 |
| 1 | Battery 3.7V | Pushpull:JST_PH_Series_S2B-PH-KL-2pole_angled | P1 |
| 1 | CapFingers | Pushpull:8_PIN_MM_conn | P2 |
| 1 | CapThumb | Pushpull:4_PIN_MM_conn | P5 |
| 1 | Cypress CY8CKIT-049-42XX | Pushpull:Psoc | U6 |
| 1 | Rcap1 | Resistors_SMD:R_1206 | R1 |
| 1 | Rcap2 | Resistors_SMD:R_1206 | R2 |
| 1 | Rcap3 | Resistors_SMD:R_1206 | R3 |
| 1 | Rcap4 | Resistors_SMD:R_1206 | R4 |
| 1 | Rcap5 | Resistors_SMD:R_1206 | R5 |
| 1 | Rcap6 | Resistors_SMD:R_1206 | R6 |
| 1 | X-OSC v1.6 | Pushpull:XOsc | U5 |
| 1 | debug port | Pin_Headers:Pin_Header_Angled_1x05 | P4 |
| 1 | to lower | Pin_Headers:Pin_Header_Straight_1x04 | P3 |
The 23 most common of 27 parts.
Questions
How big is the MainPCB PCB?
It measures 120.5 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MainPCB use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MainPCB KiCad files?
From the 3DMIN/pushpull-kicad repository on GitHub, at the commit this page was made from: the board is PushPull-main/mainPCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MainPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask 3DMIN before reusing the design.
More from 3DMIN/pushpull-kicad
6- 2 layers
- 2 layers175 × 134.2 mm
- 2 layers174.9 × 134.3 mm
- 2 layers26 × 27.2 mm
- 2 layers26.6 × 28.3 mm
Similar boards
- 2 layers47.6 × 27.3 mm
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm
Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223