Skip to the content
2 layers45.8 × 42 mmDesign class2, the printed circuit board in 3D

A 5V fixed-output step-down (buck) DC-DC converter, designed in KiCad (schematic capture and 2-layer PCB layout).

Size
45.8 × 42 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
7
Pads
20
Tracks, vias
37, 2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 Oct 2026
Updated
29 Oct 2026

Overview

Design class2 is an open-source printed circuit board by 23f2000739, from the 23f2000739/pcb_designs repository on GitHub. It is a 2-layer board of 45.8 × 42 mm with 7 parts on 7 nets, routed with 37 tracks and 2 vias.

Its parts include 3 resistors, 2 capacitors, 1 IC and 1 diode.

README

buck_converter/README.md

LM2596 5V Buck Converter

A 5V fixed-output step-down (buck) DC-DC converter, designed in KiCad (schematic capture and 2-layer PCB layout).

image

Overview

The board steps a higher DC input voltage down to a regulated 5V using the LM2596S-5 switching regulator (150 kHz, up to 3A).

Specifications

  • Input voltage: 7V to 24V DC (limited by the 35V input capacitor rating)

  • Output voltage: 5V fixed

  • Maximum output current: up to 3A (with adequate heat dissipation)

  • Switching frequency: 150 kHz (typical)

  • Board: 2-layer PCB, through-hole connectors, SMD regulator/diode/inductor

  • Circuit description

  • U1 – LM2596S-5: integrated switch and control circuit; feedback pin connected directly to the 5V output (fixed-voltage version)

  • C1 – 100µF/35V: input capacitor

  • L1: energy-storage inductor

  • D2 – 1N5822: Schottky catch diode

  • C2 – 330µF/10V: output filter capacitor

  • D1 + R1 (330Ω): power indicator LED

  • J1 / J2: input and output connectors

  • ON/OFF pin tied to GND, so the regulator is always enabled

  • PCB design notes

  • 1.2mm traces for input and output paths

  • Catch diode and capacitors placed close to the regulator to keep the switching loop short.

  • image

3d view

buck converter

Parts

7
QtyValueFootprintReferences
3Rclass2_flib:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3
1Cclass2_flib:C_Disc_D5.0mm_W2.5mm_P2.50mmC1
1C_Polarizedclass2_flib:CP_Radial_D5.0mm_P2.00mmC2
1LEDclass2_flib:LED_D5.0mmD1
1LM555xNclass2_flib:DIP-8_W7.62mmU1

More from 23f2000739/pcb_designs

2
  • 2 layers45.8 × 34.5 mmDesign class1, the printed circuit board in 3D

    Design class1

    23f2000739/pcb_designs

    A 5V fixed-output step-down (buck) DC-DC converter, designed in KiCad (schematic capture and 2-layer PCB layout).

    11 parts
  • 2 layers69 × 30.5 mmBuck converter, the printed circuit board in 3D

    Buck converter

    23f2000739/pcb_designs

    A 5V fixed-output step-down (buck) DC-DC converter, designed in KiCad (schematic capture and 2-layer PCB layout).

    9 parts

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Design class2 PCB?

It measures 45.8 × 42 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Design class2 use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Design class2 KiCad files?

From the 23f2000739/pcb_designs repository on GitHub, at the commit this page was made from: the board is 555_timer/design_class2.kicad_pcb and its schematic 555_timer/design_class2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Design class2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask 23f2000739 before reusing the design.