
Buck converter
23f2000739/pcb_designs
A 5V fixed-output step-down (buck) DC-DC converter, designed in KiCad (schematic capture and 2-layer PCB layout).

A 5V fixed-output step-down (buck) DC-DC converter, designed in KiCad (schematic capture and 2-layer PCB layout).
Design class1 is an open-source printed circuit board by 23f2000739, from the 23f2000739/pcb_designs repository on GitHub. It is a 2-layer board of 45.8 × 34.5 mm with 11 parts on 6 nets, routed with 52 tracks and 6 vias.
Its parts include 5 diodes, 3 capacitors, 1 resistor, 1 IC and 1 connector.
A 5V fixed-output step-down (buck) DC-DC converter, designed in KiCad (schematic capture and 2-layer PCB layout).
The board steps a higher DC input voltage down to a regulated 5V using the LM2596S-5 switching regulator (150 kHz, up to 3A).
Input voltage: 7V to 24V DC (limited by the 35V input capacitor rating)
Output voltage: 5V fixed
Maximum output current: up to 3A (with adequate heat dissipation)
Switching frequency: 150 kHz (typical)
Board: 2-layer PCB, through-hole connectors, SMD regulator/diode/inductor
U1 – LM2596S-5: integrated switch and control circuit; feedback pin connected directly to the 5V output (fixed-voltage version)
C1 – 100µF/35V: input capacitor
L1: energy-storage inductor
D2 – 1N5822: Schottky catch diode
C2 – 330µF/10V: output filter capacitor
D1 + R1 (330Ω): power indicator LED
J1 / J2: input and output connectors
ON/OFF pin tied to GND, so the regulator is always enabled
1.2mm traces for input and output paths
Catch diode and capacitors placed close to the regulator to keep the switching loop short.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4007 | design_class1flib:D_DO-15_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 2 | C_Small | design_class1flib:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C3 |
| 1 | C_Polarized | design_class1flib:C_0201_0603Metric | C1 |
| 1 | Conn_01x02_Pin | design_class1flib:PinHeader_1x02_P1.00mm_Vertical | J1 |
| 1 | LED | design_class1flib:LED_0201_0603Metric | D5 |
| 1 | LM7805_TO220 | design_class1flib:TO-220-3_Vertical | U1 |
| 1 | R | design_class1flib:R_0201_0603Metric | R1 |

23f2000739/pcb_designs
A 5V fixed-output step-down (buck) DC-DC converter, designed in KiCad (schematic capture and 2-layer PCB layout).

23f2000739/pcb_designs
A 5V fixed-output step-down (buck) DC-DC converter, designed in KiCad (schematic capture and 2-layer PCB layout).

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 45.8 × 34.5 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 23f2000739/pcb_designs repository on GitHub, at the commit this page was made from: the board is power_supply/design_class1.kicad_pcb and its schematic 555_timer/design_class2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask 23f2000739 before reusing the design.