
Teensy eurorack
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

MainPCB is an open-source printed circuit board by 2024-Team-Elite, from the 2024-Team-Elite/2024MainPCB repository on GitHub. It is a 4-layer board of 105 × 62.4 mm with 57 parts on 67 nets, routed with 634 tracks and 32 vias.
It is built around the TEENSY 4.1. Its parts include 12 ICs, 10 capacitors, 10 connectors, 7 resistors and 4 switches. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4, H5, H6, H7, H8 |
| 6 | .1uf | Capacitor_SMD:C_0805_2012Metric | C1, C3, C4, C5, C7, C10 |
| 5 | Motor_DC | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | M1, M2, M3, M4, M5 |
| 5 | VNH Driver | MotorDriver:VNHDriver | U2, U3, U4, U5, U8 |
| 4 | 10k | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R2, R3, R4, R5 |
| 4 | 10uf | Capacitor_SMD:C_0805_2012Metric | C2, C6, C8, C9 |
| 4 | SW_SPDT | SlideSW:SPDT_OS102011_CNK | SW1, SW2, SW3, SW4 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9, J10 |
| 2 | Conn_01x05 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J2, J7 |
| 1 | 10k | Capacitor_SMD:C_0805_2012Metric | R7 |
| 1 | 15k | Capacitor_SMD:C_0805_2012Metric | R6 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Compass | Custom:Compass Sensor DFRobot | U10 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J6 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x12 | Connector_IDC:IDC-Header_2x06_P2.54mm_Vertical | J8 |
| 1 | LED | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | D1 |
| 1 | RaspberryPi | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1 |
| 1 | RockerSwitch | RockerSwitch:RF1-1A-DC-2-B-2 | U12 |
| 1 | Screw_Terminal_01x02 | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J3 |
| 1 | TSOP25xx | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | U6 |
| 1 | Teensy4.1 | teensy:Teensy41 | U1 |
| 1 | V_Regulator3.3v | Custom:Pololu Regulator | U13 |
| 1 | V_Regulator5v | Custom:Pololu5V3.4A | U11 |
| 1 | V_Regulator5v | Custom:Pololu Regulator | U7 |

newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels





jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1

FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project

DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
It measures 105 × 62.4 mm and has 4 copper layers, 1.6 mm thick.
57 parts, built around the TEENSY 4.1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 2024-Team-Elite/2024MainPCB repository on GitHub, at the commit this page was made from: the board is MainPCB.kicad_pcb and its schematic MainPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask 2024-Team-Elite before reusing the design.