Skip to the content
4 layers48.5 × 56 mmDigirig icom, the printed circuit board in 3D

A custom hardware controller for the ICOM IC-2730 radio, featuring digital audio processing and USB connectivity.

Size
48.5 × 56 mm
Copper layers
4
Thickness
1.6 mm
Parts
70
Nets
103
Pads
296
Tracks, vias
583, 100
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
18 Jan 2026
Updated
28 Jan 2026

Overview

Digirig icom is an open-source printed circuit board by 1vers1on, from the 1vers1on/digirig_icom repository on GitHub. It is a 4-layer board of 48.5 × 56 mm with 70 parts on 103 nets, routed with 583 tracks and 100 vias.

It is built around the RP2354A, TLV320AIC3204IRHBR and CD4053BE, with the LM393DRG, TXS0102DQER and MMBT3904 among its other parts. Its parts include 20 capacitors, 19 resistors, 7 ICs, 4 transistors and 4 connectors. It belongs with the RP2350 boards of this library.

Main components

11

README

README.md

ICOM IC-2730 Digital Controller

A custom hardware controller for the ICOM IC-2730 radio, featuring digital audio processing and USB connectivity.

Overview

This project provides a digital interface for the ICOM IC-2730 radio using a Raspberry Pi RP2350 microcontroller and TLV320AIC3204 audio codec. It handles both transmit and receive audio digitally while managing the radio's unique logic level requirements.

Hardware

Main Components

  • Microcontroller: Raspberry Pi RP2350

    • High processing power
    • Native USB support
    • Familiar development ecosystem
  • Audio Codec: TLV320AIC3204

    • Integrated DAC and ADC
    • High-quality audio processing

Key Features

  • USB connectivity for computer interface
  • Bidirectional audio processing (TX/RX)
  • Analog switching circuitry
  • LDO power regulation
  • 3D-printed enclosure with screw mounting

Design Challenges

Logic Level Weirdness The ICOM IC-2730 uses some very unusual logic levels that I've never encountered before:

  • High: 5V
  • Low: 3.1V (yes, really!)

Solution

  • RX path: LM393 comparator to handle the odd voltage levels
  • TX path: 5V level shifter (if it reads 3.1V as low, it should read 0V as low too)

Power Management Originally considered a buck converter for efficiency, but went with an LDO since it's perfectly adequate for this application and simpler to implement.

Notes

  • This was my first time using Fusion 360 for CAD work
  • Spent way too long figuring out MOSFET power switching
  • Enclosure uses screws instead of glue for user serviceability

Parts

70
QtyValueFootprintReferences
94.7uFCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C12, C13, C14, C15, C16, C17
70.1uFCapacitor_SMD:C_0402_1005MetricC4, C5, C6, C9, C11, C20, C21
610kResistor_SMD:R_0402_1005MetricR2, R5, R7, R9, R13, R14
6TestPointTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3, TP4, TP5, TP6
51kResistor_SMD:R_0402_1005MetricR3, R4, R8, R10, R18
210pFCapacitor_SMD:C_0402_1005MetricC8, C10
21uFCapacitor_SMD:C_0402_1005MetricC18, C19
222Resistor_SMD:R_0402_1005MetricR11, R12
2CD4053BPackage_SO:TSSOP-16_4.4x5mm_P0.65mmU2, U3
2MMBT3904Package_TO_SOT_SMD:SOT-23Q3, Q4
2RJ45Connector_RJ:RJ45_Amphenol_54602-x08_HorizontalJ1, J2
2SS14Diode_SMD:D_SMAD1, D2
1100kResistor_SMD:R_0402_1005MetricR19
112kResistor_SMD:R_0402_1005MetricR17
1220Resistor_SMD:R_0603_1608MetricR15
12N7002digikey-footprints:SOT-23-3Q2
13.3uHfootprints:AOTAB201610S3R3101TL1
133Resistor_SMD:R_0402_1005MetricR1
1470Resistor_SMD:R_0402_1005MetricR6
147kResistor_SMD:R_0402_1005MetricR16
1ABM8-272-T3footprints:XTAL_ABM8-272-T3Y1
1AO3401Adigikey-footprints:SOT-23-3Q1
1LEDLED_SMD:LED_0603_1608MetricD3
1LM393DRdigikey-footprints:SOIC-8_W3.9mmU5
1MCP1703Ax-330xxDBPackage_TO_SOT_SMD:SOT-223-3_TabPin2U4
1RP2354KiCadpretty:QFN40P700X700X90-61N-DIC1
1SJ-3523-SMT-TRdigikey-footprints:Switch_Slide_11.6x4mm_SJ-3523-SMTCON2
1SW_SPSTButton_Switch_SMD:SW_SPST_CK_RS282G05A3SW1
1TLV320AIC3204IRHBRKiCadpretty:QFN50P500X500X100-33NU1
1TXS0102DQEPackage_SON:X2SON-8_1.4x1mm_P0.35mmU6
1USB_BConnector_USB:USB_B_Lumberg_2411_02_HorizontalJ3

The 66 most common of 70 parts.

Similar boards

  • 4 layers46 × 110 mmAware01 h7 rev2 0, the printed circuit board in 3D

    Aware01 h7 rev2 0

    95lux/aware01

    Aarebot is a dynamic realtime sampler built as a Eurorack module. At its core is a stereo tape-style engine with a hot-swapping record/playback buffer - this enables to record and play simultaneously.

    158 parts15GPL-3.0
  • 4 layers50 × 50 mm50x50 2 Layer, the printed circuit board in 3D

    50x50 2 Layer

    UC-Aerospace/Electrical-Tut-26

    2026 Avionics tutorial example boards for UC Aerospace

    86 parts
  • 2 layers115.8 × 98.6 mmEe115-capstone, the printed circuit board in 3D

    Ee115-capstone

    tsaimatthew/ee115-capstone

    191 parts
  • 2 layers184 × 94 mmFIC Board, the printed circuit board in 3D

    FIC Board

    DanielRHoefer/satoshi-emblem

    Toyota backlit grill emblem with sequential LEDs for 3rd gen 4runner

    193 parts1
  • 2 layers200 × 170 mmRouting R1, the printed circuit board in 3D

    Routing R1

    ddasdkimo/rack-atx-controller

    10-host isolated ATX rack controller hardware planning, interactive 3D model and wiring documentation

    698 parts
  • 2 layers104.1 × 78.7 mmMK KS MkIV, the printed circuit board in 3D

    MK KS MkIV

    MorseKOB/MuKOB

    MuKOB (μKOB) - MorseKOB for a microcontroller-based platform.

    84 partsMIT
  • 2 layers170.1 × 96.9 mmSmartPrintCoreH7x, the printed circuit board in 3D

    SmartPrintCoreH7x

    BoltzRnD/SmartPrintCoreH7x

    STM32H7 based Robust and Open Source 3D Printer Mainboard

    567 parts89
  • 4 layers111 × 110 mmComplex vco ranged, the printed circuit board in 3D

    Complex vco ranged

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    234 parts13

Questions

How big is the Digirig icom PCB?

It measures 48.5 × 56 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Digirig icom use?

70 parts, built around the RP2354A, TLV320AIC3204IRHBR, CD4053BE and LM393DRG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Digirig icom KiCad files?

From the 1vers1on/digirig_icom repository on GitHub, at the commit this page was made from: the board is digirig_icom.kicad_pcb and its schematic digirig_icom.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Digirig icom design in my own project?

Its repository states no licence, so its author keeps all rights: ask 1vers1on before reusing the design.