Skip to the content
2 layers30.7 × 58.2 mmSimultypeprog, the printed circuit board in 3D

Simultypeprog

12voltman/SimulType

A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys

Size
30.7 × 58.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
18
Pads
42
Tracks, vias
65, 17
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
26 Aug 2021
Updated
2 Jul 2024

Overview

Simultypeprog is an open-source printed circuit board by 12voltman, from the 12voltman/SimulType repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 30.7 × 58.2 mm with 17 parts on 18 nets, routed with 65 tracks and 17 vias.

Its parts include 8 connectors, 6 resistors, 1 diode and 1 switch.

README

README.md

SimulType

A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys

Parts

17
QtyValueFootprintReferences
6Conn_01x01Connector_Wire:SolderWirePad_1x01_SMD_1x2mmJ1, J4, J5, J6, J7, J8
3330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3
210kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR5, R6
2Conn_01x07Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ2, J3
1100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
1BuzzerBuzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mmBZ1
1LED_RGBALED_THT:LED_D5.0mm-4_RGBD1
1SW_PushButton_Switch_THT:SW_PUSH-12mmSW1

More from 12voltman/SimulType

4
  • 2 layers465.6 × 157.2 mmSimulTypeUltraFullMag, the printed circuit board in 3D

    SimulTypeUltraFullMag

    12voltman/SimulType

    A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys

    797 partsCC0-1.0
  • 2 layers465.6 × 157.2 mmSimulTypeUltra, the printed circuit board in 3D

    SimulTypeUltra

    12voltman/SimulType

    A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys

    701 partsCC0-1.0
  • 2 layers164.1 × 47 mmSimulTypeHeaderUltra, the printed circuit board in 3D

    SimulTypeHeaderUltra

    12voltman/SimulType

    A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys

    79 partsCC0-1.0
  • 2 layers47.3 × 46.7 mmSimultypecontrol, the printed circuit board in 3D

    Simultypecontrol

    12voltman/SimulType

    A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys

    55 partsCC0-1.0

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the Simultypeprog PCB?

It measures 30.7 × 58.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Simultypeprog use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Simultypeprog KiCad files?

From the 12voltman/SimulType repository on GitHub, at the commit this page was made from: the board is Hardware/devtools/simultypeprog/simultypeprog.kicad_pcb and its schematic Hardware/controlboards/SimulTypeHeaderUltra/SimulTypeHeaderUltra.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Simultypeprog design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).