2 layers465.6 × 157.2 mm
SimulTypeUltraFullMag
12voltman/SimulType
A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys
797 partsCC0-1.0
2 layers164.1 × 47 mm
SimulTypeHeaderUltra
12voltman/SimulTypeA collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys
- Size
- 164.1 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 250
- Pads
- 558
- Tracks, vias
- 195, 8
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Aug 2021
- Updated
- 2 Jul 2024
Overview
SimulTypeHeaderUltra is an open-source printed circuit board by 12voltman, from the 12voltman/SimulType repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 164.1 × 47 mm with 79 parts on 250 nets, routed with 195 tracks and 8 vias.
It is built around the W25Q32JVZPIQ, AP22814AW5 and 74HC595, with the DS2745U+T&R and TS3USB30ERSWR-MS among its other parts. Its parts include 13 ICs, 13 connectors, 7 diodes, 4 resistors and 3 switches. It belongs with the nRF52 and nRF5x boards of this library.
Main components
5
W25Q32JVZPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 133MHz 2.7V~3.6V 20 Years 32Mbit 3ms SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbondNOR FLASH
AP22814AW5
SOT-25-40℃~+85℃ 1 2.7V~5.5V 3A 50mΩ Active High、Active Low High Side Switch Output discharge function、Soft-start、Under-voltage lockout、Reverse voltage protection、Overcurrent Protection、Over temperature protection、Short-Circuit Protection、Reverse current blocking SOT-25 Power Distribution Switches ROHSDiodes IncorporatedPower Distribution Switches
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
DS2745U+T&R
MSOP-8-40℃~+85℃ 1 1uA 2.5V~4.5V I2C Monitoring IC Not supported Not supported MSOP-8 Battery Management ROHSMaxim Integrated (Analog Devices)Battery ManagementTS3USB30ERSWR-MS
UQFN-10(1.4x1.8)UQFN-10(1.4x1.8) Analog Switches, Multiplexers ROHSMSKSEMIAnalog Switches, Multiplexers
README
README.mdSimulType
A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | ESDUSB | Package_TO_SOT_SMD:SOT-143 | D2, D3, D4, D5, D6, D7 |
| 5 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2, J7, J8, J9, J11 |
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | AP22814AW5 | Package_TO_SOT_SMD:SOT-23-5 | U6, U11, U12, U13 |
| 4 | Conn_01x15 | Connector_FFC-FPC:Molex_200528-0150_1x15-1MP_P1.00mm_Horizontal | J6, J10, J12, J13 |
| 3 | 74HC595 | Package_DFN_QFN:DHVQFN-16-1EP_2.5x3.5mm_P0.5mm_EP1x2mm | U1, U2, U3 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 1 | Conn_01x45 | Connector_FFC-FPC:TE_4-1734839-5_1x45-1MP_P0.5mm_Horizontal | J1 |
| 1 | DS2745U | Package_SO:TSSOP-8_3x3mm_P0.65mm | U9 |
| 1 | G*** | kibuzzard-65BEFA0F | kibuzzard-65BEFA0F |
| 1 | G*** | kibuzzard-65C25006 | kibuzzard-65C25006 |
| 1 | G*** | kibuzzard-65BDD7EC | kibuzzard-65BDD7EC |
| 1 | G*** | kibuzzard-65BEF9CF | kibuzzard-65BEF9CF |
| 1 | G*** | kibuzzard-65BEF9A5 | kibuzzard-65BEF9A5 |
| 1 | G*** | kibuzzard-65BEFA3D | kibuzzard-65BEFA3D |
| 1 | G*** | kibuzzard-65BEF9FD | kibuzzard-65BEF9FD |
| 1 | G*** | kibuzzard-65C29BCC | kibuzzard-65C29BCC |
| 1 | G*** | kibuzzard-65BDD62B | kibuzzard-65BDD62B |
| 1 | G*** | kibuzzard-65BEFA1D | kibuzzard-65BEFA1D |
| 1 | G*** | kibuzzard-65BEF9E8 | kibuzzard-65BEF9E8 |
| 1 | G*** | kibuzzard-65BEF941 | kibuzzard-65BEF941 |
| 1 | G*** | kibuzzard-65BDD614 | kibuzzard-65BDD614 |
| 1 | G*** | kibuzzard-65BEF9DC | kibuzzard-65BEF9DC |
| 1 | G*** | kibuzzard-65BEFA24 | kibuzzard-65BEFA24 |
| 1 | G*** | kibuzzard-65BEFA60 | kibuzzard-65BEFA60 |
| 1 | G*** | kibuzzard-65BEF9F0 | kibuzzard-65BEF9F0 |
| 1 | G*** | kibuzzard-65BE09D0 | kibuzzard-65BE09D0 |
| 1 | G*** | kibuzzard-65BDD6E5 | kibuzzard-65BDD6E5 |
| 1 | G*** | kibuzzard-65BE0934 | kibuzzard-65BE0934 |
| 1 | G*** | kibuzzard-65BEFA57 | kibuzzard-65BEFA57 |
| 1 | G*** | kibuzzard-65BEF9E1 | kibuzzard-65BEF9E1 |
| 1 | G*** | kibuzzard-65BDD75E | kibuzzard-65BDD75E |
| 1 | G*** | kibuzzard-65BEFA03 | kibuzzard-65BEFA03 |
| 1 | G*** | kibuzzard-65BEFA42 | kibuzzard-65BEFA42 |
| 1 | G*** | kibuzzard-65BEFA17 | kibuzzard-65BEFA17 |
| 1 | G*** | kibuzzard-65BDD880 | kibuzzard-65BDD880 |
| 1 | G*** | kibuzzard-65BEFA30 | kibuzzard-65BEFA30 |
| 1 | G*** | kibuzzard-65BEF9C3 | kibuzzard-65BEF9C3 |
| 1 | G*** | kibuzzard-65BEF9D6 | kibuzzard-65BEF9D6 |
| 1 | G*** | kibuzzard-65BEFA6D | kibuzzard-65BEFA6D |
| 1 | G*** | kibuzzard-65BEFA66 | kibuzzard-65BEFA66 |
| 1 | G*** | kibuzzard-65BEFA36 | kibuzzard-65BEFA36 |
| 1 | G*** | kibuzzard-65BEFA08 | kibuzzard-65BEFA08 |
| 1 | G*** | kibuzzard-65BEFA48 | kibuzzard-65BEFA48 |
| 1 | LED | LED_THT:LED_SideEmitter_Rectangular_W4.5mm_H1.6mm | D1 |
| 1 | Qwiic_I2C_connector | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J5 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 1 | SW_Push | maxfootprints:TINYTACTILE | SW2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW3 |
| 1 | SolderJumper_3_Bridged123 | maxfootprints:SolderJumper-3_P1.3mm_Bridged123_RoundedPad1.0x1.5mm | JP3 |
| 1 | TS3USB30ERSWR | Package_DFN_QFN:UQFN-10_1.4x1.8mm_P0.4mm | U7 |
| 1 | TSDP341xx | OptoDevice:Vishay_MOLD-3Pin | U10 |
| 1 | USB2514B_Bi | Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm | U8 |
| 1 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J3 |
| 1 | W25Q32JVZP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U5 |
| 1 | nRF5340-QKxx | Package_DFN_QFN:Nordic_AQFN-94-1EP_7x7mm_P0.4mm | U4 |
More from 12voltman/SimulType
4- 2 layers465.6 × 157.2 mm
SimulTypeUltra
12voltman/SimulType
A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys
701 partsCC0-1.0 - 2 layers47.3 × 46.7 mm
Simultypecontrol
12voltman/SimulType
A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys
55 partsCC0-1.0 - 2 layers30.7 × 58.2 mm
Simultypeprog
12voltman/SimulType
A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys
17 partsCC0-1.0
Similar boards
- 4 layers30 × 50 mm
- 4 layers95 × 55.5 mm
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0 - 4 layers136.3 × 71.1 mm
- 2 layers112.6 × 42.6 mm
- 4 layers79.5 × 20 mm
Matter usb switch
IvanVeloz/smart-usb-plug
A smart plug for USB with energy measurement and Matter over Thread support
65 parts2GPL-3.0 - 4 layers50 × 79.5 mm
GD32-Devboard
ConnorRigby/GD32-Devboard
Simple GD32F405 Development board with CAN, SD Card, Lora, BLE and GPS
106 parts - 8 layers50 × 50 mm
- 4 layers110 × 110 mm
Smoothiev2-prime
Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards
453 parts71
Questions
How big is the SimulTypeHeaderUltra PCB?
It measures 164.1 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SimulTypeHeaderUltra use?
79 parts, built around the W25Q32JVZPIQ, AP22814AW5, 74HC595 and DS2745U+T&R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SimulTypeHeaderUltra KiCad files?
From the 12voltman/SimulType repository on GitHub, at the commit this page was made from: the board is Hardware/controlboards/SimulTypeHeaderUltra/SimulTypeHeaderUltra.kicad_pcb and its schematic Hardware/controlboards/SimulTypeHeaderUltra/SimulTypeHeaderUltra.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SimulTypeHeaderUltra design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).