
Led flasher with center tap
0xPolybit/pcb-kicad
All my circuit schematics and PCB diagrams for my PCB elective class, KIIT 4th semester.

All my circuit schematics and PCB diagrams for my PCB elective class, KIIT 4th semester.
Led flasher is an open-source printed circuit board by 0xPolybit, from the 0xPolybit/pcb-kicad repository on GitHub, published under the MIT licence. It is a 2-layer board of 38 × 46.5 mm with 11 parts on 8 nets, routed with 42 tracks and 0 vias.
Its parts include 4 resistors, 2 capacitors, 2 diodes, 2 transistors and 1 connector.
All my circuit schematics and PCB diagrams for my PCB elective class, KIIT 4th semester.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4 |
| 2 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 2 | NPN | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J1 |

0xPolybit/pcb-kicad
All my circuit schematics and PCB diagrams for my PCB elective class, KIIT 4th semester.

0xPolybit/pcb-kicad
All my circuit schematics and PCB diagrams for my PCB elective class, KIIT 4th semester.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 38 × 46.5 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 0xPolybit/pcb-kicad repository on GitHub, at the commit this page was made from: the board is led-flasher/led-flasher.kicad_pcb and its schematic center-tap-rectifier/center-tap-rectifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).