
Led flasher
0xPolybit/pcb-kicad
All my circuit schematics and PCB diagrams for my PCB elective class, KIIT 4th semester.

All my circuit schematics and PCB diagrams for my PCB elective class, KIIT 4th semester.
Led flasher with center tap is an open-source printed circuit board by 0xPolybit, from the 0xPolybit/pcb-kicad repository on GitHub, published under the MIT licence. It is a 2-layer board of 102.5 × 47.5 mm with 17 parts on 11 nets, routed with 64 tracks and 0 vias.
Its parts include 5 resistors, 4 capacitors, 4 diodes, 2 transistors and 1 IC.
All my circuit schematics and PCB diagrams for my PCB elective class, KIIT 4th semester.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1000u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4 |
| 2 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C3, C4 |
| 2 | LED | LED_THT:LED_D3.0mm | D3, D4 |
| 2 | NPN | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |

0xPolybit/pcb-kicad
All my circuit schematics and PCB diagrams for my PCB elective class, KIIT 4th semester.

0xPolybit/pcb-kicad
All my circuit schematics and PCB diagrams for my PCB elective class, KIIT 4th semester.



hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…


It measures 102.5 × 47.5 mm and has 2 copper layers, 1.6 mm thick.
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 0xPolybit/pcb-kicad repository on GitHub, at the commit this page was made from: the board is led-flasher-with-center-tap/led-flasher-with-center-tap.kicad_pcb and its schematic center-tap-rectifier/center-tap-rectifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).