

Flex cable
Mechanical macropad with OLED running QMK
- Size
- 12.5 × 42.5 mm
- Copper layers
- 2
- Thickness
- 0.09 mm
- Parts
- 3
- Nets
- 10
- Pads
- 26
- Tracks, vias
- 28, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Feb 2021
- Updated
- 28 Jun 2023
Overview
Flex cable is an open-source printed circuit board by 0xCB-dev, from the 0xCB-dev/0xCB-1337 repository on GitHub. It is a 2-layer board of 12.5 × 42.5 mm with 3 parts on 10 nets, routed with 28 tracks and 2 vias.
It belongs with the keyboards and input boards of this library.
README
README.md0xcb-1337
Mechanical macropad with OLED running QMK
Available here:
QMK:
Flashing:
qmk clonecd qmk_firmwareexport LTO=Y- Press switch 1 while plugging in to go into dfu mode (or the reset button)
make 0xcb/1337:via:flash
Assembly:
You can use the humanpnp to easily place components.
PCB:
KiCad 6 stable release - using these libs
| Top | Bottom |
|---|---|
![]() | ![]() |
Case 3D files:
PCB 3D files:
BOM:
| References | Value | Quantity | Part Nb. |
|---|---|---|---|
| C2, C4, C6, C7, C8, C10, C12, C14 | 100n | 8 | C478888 |
| C3, C5, C9 | 1u | 3 | C29936 |
| C11, C13 | 22p | 2 | C85969 |
| C1 | 10u | 1 | C85713 |
| R1, R2 | 5.1k | 2 | C23186 |
| R3, R4 | 22 | 2 | C174301 |
| R5, R6 | 10k | 2 | C98220 |
| D1, D2, D3, D4, D5, D6, D7, D8 | SK6812MINI-E | 8 | SK6812MINI-E |
| D10, D11, D12, D13 | WS2812B | 4 | C114586 |
| D9 | SMF5.0CA | 1 | 576-SMF5.0CA |
| U2 | USBLC6-2SC6 | 1 | C7519 |
| U3 | ATMEGA32U4 | 1 | ATMEGA32U4RC-MU-ND |
| Y1 | 16MHz | 1 | C389842 |
| F1 | 1A | 1 | C369150 |
| SW1 | SW_Push | 1 | C318884 |
| FB1, FB2 | 600R | 2 | C74330 |
| RN1 | 10k | 1 | C109324 |
| J1 | USB_IN | 1 | 900-2169900001CT-ND |
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | fpc | Library:FFC-SMD_12P-P0.50_X05B20U12T | J1 |
| 1 | oled | Library:oled | J2 |
More from 0xCB-dev/0xCB-1337
3Similar boards
- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm

- 2 layers

Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm

- 2 layers124.5 × 33.7 mm

- 2 layers10.5 × 83 mm

- 2 layers21.2 × 51.3 mm

Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Flex cable PCB?
It measures 12.5 × 42.5 mm and has 2 copper layers, 0.09 mm thick.
What parts does the Flex cable use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flex cable KiCad files?
From the 0xCB-dev/0xCB-1337 repository on GitHub, at the commit this page was made from: the board is rev5.0/flex-cable/rev1.0/pcb.kicad_pcb and its schematic rev3.0/1337-v3.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flex cable design in my own project?
Its repository states no licence, so its author keeps all rights: ask 0xCB-dev before reusing the design.



