00TLalu/TL-Node-HardwarePCB for OpenTANI
TL Node Rev.0 is an open-source printed circuit board by 00TLalu, from the 00TLalu/TL-Node-Hardware repository on GitHub. It is a 2-layer board of 88 × 82 mm with 72 parts on 72 nets, routed with 498 tracks and 93 vias.
It is built around the XC6222A331MR-G, MPU-6050 and 1N5819W, with the AO3401A among its other parts. Its parts include 17 resistors, 12 capacitors, 10 connectors, 4 ICs and 3 switches.
PCB for OpenTANI
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | JST-PH 1x04 | TL_Library:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J5, J6, J7, J8, J9, J10 |
| 5 | 100n | TL_Library:C_0402_TL | C1, C2, C3, C10, C11 |
| 4 | 0 | TL_Library:R_0402_TL | R1, R7, R9, R11 |
| 4 | 10µ | TL_Library:C_0603_TL | C5, C6, C7, C8 |
| 4 | MH 4mm Via | MountingHole:MountingHole_3mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 10k | TL_Library:R_0402_TL | R2, R8, R10 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 18650 | TL_Library:BatteryHolder_MPD_BH-18650-PC2 | BT1, BT2 |
| 2 | 2k2 | TL_Library:R_0402_TL | R13, R14 |
| 2 | 4k7 | TL_Library:R_0402_TL | R16, R17 |
| 2 | JST-SH 1x06 | TL_Library:JST_SH_1x06-1MP_P1.00mm_Vertical_TL | J2, J3 |
| 2 | NC | TL_Library:R_0402_TL | R12, R15 |
| 2 | XC6222A331MR-G | TL_Library:SOT-23-5_TL | U2, U3 |
| 1 | 10n | TL_Library:C_0402_TL | C9 |
| 1 | 1N5819W | TL_Library:D_SOD-123F | D1 |
| 1 | 1k | TL_Library:R_0402_TL | R3 |
| 1 | 1m | TL_Library:R_0402_TL | R4 |
| 1 | 1µ | TL_Library:C_0402_TL | C4 |
| 1 | 200k | TL_Library:R_0402_TL | R6 |
| 1 | 220k | TL_Library:R_0402_TL | R5 |
| 1 | 2n2 | TL_Library:C_0402_TL | C12 |
| 1 | AO3401A | TL_Library:SOT-23_TL | Q1 |
| 1 | Buzzer | TL_Library:JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_Vertical | BZ1 |
| 1 | G*** | kibuzzard-6343B22B | kibuzzard-6343B22B |
| 1 | G*** | kibuzzard-6343A88C | kibuzzard-6343A88C |
| 1 | G*** | kibuzzard-6343A679 | kibuzzard-6343A679 |
| 1 | G*** | kibuzzard-6343A6B9 | kibuzzard-6343A6B9 |
| 1 | G*** | kibuzzard-634399EB | kibuzzard-634399EB |
| 1 | G*** | kibuzzard-6343A6AD | kibuzzard-6343A6AD |
| 1 | G*** | kibuzzard-634411D5 | kibuzzard-634411D5 |
| 1 | G*** | kibuzzard-6343BC66 | kibuzzard-6343BC66 |
| 1 | G*** | kibuzzard-6343B0FA | kibuzzard-6343B0FA |
| 1 | G*** | kibuzzard-6343A848 | kibuzzard-6343A848 |
| 1 | G*** | kibuzzard-6343A87B | kibuzzard-6343A87B |
| 1 | G*** | kibuzzard-63441851 | kibuzzard-63441851 |
| 1 | G*** | kibuzzard-6343B029 | kibuzzard-6343B029 |
| 1 | JST-PH 1x02 | TL_Library:JST_PH_B2B-PH-TL-2.0 | J4 |
| 1 | JST-PH 1x04 | TL_Library:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical_TL | J1 |
| 1 | MPU-6050 | TL_Library:InvenSense_QFN-24_4x4mm_P0.5mm_NoMask | U4 |
| 1 | POWER | TL_Library:SW_SPDT_PCM12_TL | SW1 |
| 1 | RED | TL_Library:D_0603_TL | D2 |
| 1 | Reed1 | TL_Library:SW_SPST_REED_CT10-XXXX-G1 | SW2 |
| 1 | Reed2 | TL_Library:SW_SPST_REED_CT10-XXXX-G1 | SW3 |
| 1 | TL-S3-REV.B | TL_Library:TL-S2_Rev.B2 | U1 |
It measures 88 × 82 mm and has 2 copper layers, 1.6 mm thick.
72 parts, built around the XC6222A331MR-G, MPU-6050, 1N5819W and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 00TLalu/TL-Node-Hardware repository on GitHub, at the commit this page was made from: the board is Hardware/TL-Node Rev.0.kicad_pcb and its schematic Hardware/TL-Node Rev.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask 00TLalu before reusing the design.
MorgenWebDigital/airquality
A battery-powered indoor air quality monitor. Real CO₂ from a photoacoustic sensor, VOC and NOx, temperature, humidity and ambient light, shown on a 2.13" e-paper display and sent over Bluetooth LE.
MorgenWebDigital/airqualitymini
A stationary indoor air quality sensor. Real CO₂, VOC and NOx, temperature and humidity. No display, no battery. Powered from USB-C, read out over Bluetooth LE.
Mposiblee/Zireael
The keyboard is based on Dao Chok BLE. The locations of components on the board have been changed, space for the battery has been added, and the thumb cluster has also been changed.
heyitscassio/carpo
Carpo is a 36 keys, low profile, choc spaced, split keyboard.
tubbytwins/bumwings-kbd
Ergonomic keyboard PCB design that uses the Waveshare RP2040-zero board.
hringdrifi/blad
This KiCad export places center-origin Smiðr switch footprints from the physical layout and emits a matching schematic with keyboard matrix nets.
01HACKER01/Chaox-75-v2
This repository contains the firmware and hardware files for my CHAOX-75 keyboard project.