Skip to the content
9

XT25F32FDTIGT

XTXExtended

-40℃~+85℃ 0.3uA 100,000 cycles 133MHz 2.7V~3.6V 20 Years 32Mbit 400us SPI DFN-8 NOR FLASH ROHS

Part id
xtx/XT25F32FDTIGT
Category
NOR FLASH
Package
DFN-8
Pins
9
In stock
2,465 at JLCPCB (C7429719)
Used on
3 open-source boards

Overview

The XT25F32FDTIGT is a NOR FLASH made by XTX in a DFN-8 package with 9 pins. -40℃~+85℃ 0.3uA 100,000 cycles 133MHz 2.7V~3.6V 20 Years 32Mbit 400us SPI DFN-8 NOR FLASH ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:GD25LQ255EWIGR, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-8_L3.0-W2.0-P0.50-BL-EP_XT25XXX, from EasyEDA), ready for a KiCad board. 2,465 are in stock at JLCPCB (part C7429719). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

9EP8VCC7HOLD#(IO3)6SCLK5SI(IO0)4VSS3WP#(IO2)2SO(IO1)1CS#
EasyEDA_Cloud:GD25LQ255EWIGRFrom EasyEDA

Footprint

9
EasyEDA_Cloud:DFN-8_L3.0-W2.0-P0.50-BL-EP_XT25XXXFrom EasyEDA

Pinout

9
The pins of the XT25F32FDTIGT
PinNameType
1CS#Unspecified
2SO(IO1)Unspecified
3WP#(IO2)Unspecified
4VSSUnspecified
5SI(IO0)Unspecified
6SCLKUnspecified
7HOLD#(IO3)Unspecified
8VCCUnspecified
9EPUnspecified

Open-source boards using it

3
  • 4 layers40.8 × 14 mmSharkbait tracker, the printed circuit board in 3D

    Sharkbait tracker

    LithosphereRocketry/sharkbait-tracker

    A small and low-cost GPS tracker for model rocketry applications.

    56 parts1GPL-3.0
  • 6 layers100 × 100 mmFlexLogic EVB, the printed circuit board in 3D

    FlexLogic EVB

    y-suyama/FlexLogic_EVB

    311 partsApache-2.0
  • 4 layers41.6 × 36 mmEpaper smart watch, the printed circuit board in 3D

    Epaper smart watch

    AeroX2/aerox2.github.io

    One repository and npm installation builds the workshop at jamesridey.dev and the professional site at cv.jamesridey.dev.

    102 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the XT25F32FDTIGT?

Yes. The symbol is EasyEDA_Cloud:GD25LQ255EWIGR and the footprint EasyEDA_Cloud:DFN-8_L3.0-W2.0-P0.50-BL-EP_XT25XXX, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the XT25F32FDTIGT?

DFN-8, with 9 pins. Its footprint is drawn on this page.

Where is the XT25F32FDTIGT datasheet?

XTX publishes it: the Datasheet link on this page opens it.

Where can I order the XT25F32FDTIGT?

JLCPCB lists it as part C7429719, with 2,465 in stock; the sellers' links on this page open their listings.

What can replace the XT25F32FDTIGT?

Parts like it in the library: the W25Q128JVSIQ by Winbond, the W25Q16JVSNIQ by Winbond Elec, the GD25Q32ESIG by GigaDevice Semicon Beijing and the W25Q128JVFIQ by Winbond Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the XT25F32FDTIGT?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.