Skip to the content
11111111

7461104

Würth ElektronikExtended

9x9x14mm, Right Angle Bush with 5.2mm Hole Diameter and Two Rows Press-Fit Pin-Plate, WP-RATR Series

Part id
wurth/7461104
Category
PCB Welding Terminal
Package
插件
Pins
8
In stock
0 at JLCPCB (C5915454)

Overview

The 7461104 is a PCB Welding Terminal made by Würth Elektronik in a 插件 package with 1 pins. 9x9x14mm, Right Angle Bush with 5.2mm Hole Diameter and Two Rows Press-Fit Pin-Plate, WP-RATR Series.

PCBKit's library has its KiCad symbol (Connector_Generic:Conn_01x01, from KiCad's library) and its footprint (Fasteners & Fixings:WURTH_7461104, from CERN's library), ready for a KiCad board. JLCPCB lists it (part C5915454).

Symbol

1
Connector_Generic:Conn_01x01From KiCad's library

Footprint

11111111
Fasteners & Fixings:WURTH_7461104From CERN's library

Pinout

1
The pins of the 7461104
PinNameType
1Pin_1Passive

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the 7461104?

Yes. The symbol is Connector_Generic:Conn_01x01 and the footprint Fasteners & Fixings:WURTH_7461104, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 7461104?

插件, with 1 pins. Its footprint is drawn on this page.

Where is the 7461104 datasheet?

Würth Elektronik publishes it: the Datasheet link on this page opens it.

Where can I order the 7461104?

JLCPCB lists it as part C5915454, with 0 in stock; the sellers' links on this page open their listings.

What can replace the 7461104?

Parts like it in the library: the 7461063 by Würth Elektronik. Check their datasheets: a part that fits the footprint may still differ in its ratings.