W5200
WIZNETExtended
10BASE-T、100BASE-TX 3.3V 32KB 8 SPI SPI Yes QFN-48-EP(7x7) Ethernet Controllers ROHS
- Part id
- wiznet/W5200
- Category
- Ethernet Controllers
- Package
- QFN-48-EP(7x7)
- Pins
- 49
- In stock
- 100 at JLCPCB (C14731)
Overview
The W5200 is an ethernet Controller made by WIZNET in a QFN-48-EP(7x7) package with 49 pins. 10BASE-T、100BASE-TX 3.3V 32KB 8 SPI SPI Yes QFN-48-EP(7x7) Ethernet Controllers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:W5200, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-48_L7.0-W7.0-P0.50-BL-EP5.1, from EasyEDA), ready for a KiCad board. 100 are in stock at JLCPCB (part C14731).
Symbol
Footprint
Pinout
49| Pin | Name | Type |
|---|---|---|
| 1 | XI | Unspecified |
| 2 | XO | Unspecified |
| 3 | nFDXLED/M2 | Unspecified |
| 4 | nSPDLED/M1 | Unspecified |
| 5 | nLINKLED/M0 | Unspecified |
| 6 | M3 | Unspecified |
| 7 | RSV | Unspecified |
| 8 | VCC1V8 | Unspecified |
| 9 | GND | Unspecified |
| 10 | GND | Unspecified |
| 11 | VCC3V3A | Unspecified |
| 12 | BIAS | Unspecified |
| 13 | GNDA | Unspecified |
| 14 | 1V8O | Unspecified |
| 15 | VCC3V3A | Unspecified |
| 16 | XTALVDD | Unspecified |
| 17 | TXOP | Unspecified |
| 18 | TXON | Unspecified |
| 19 | GNDA | Unspecified |
| 20 | RXIP | Unspecified |
| 21 | RXIN | Unspecified |
| 22 | GNDA | Unspecified |
| 23 | VCC3V3A | Unspecified |
| 24 | GNDA | Unspecified |
| 25 | VCC1V8 | Unspecified |
| 26 | GND | Unspecified |
| 27 | VCC3V3 | Unspecified |
| 28 | GND | Unspecified |
| 29 | ANE | Unspecified |
| 30 | DUP | Unspecified |
| 31 | SPD | Unspecified |
| 32 | RSV | Unspecified |
| 33 | RSV | Unspecified |
| 34 | RSV | Unspecified |
| 35 | RSV | Unspecified |
| 36 | RSV | Unspecified |
| 37 | RSV | Unspecified |
| 38 | RSV | Unspecified |
| 39 | RSV | Unspecified |
| 40 | nINT | Unspecified |
| 41 | nSCS | Unspecified |
| 42 | SCLK | Unspecified |
| 43 | MOSI | Unspecified |
| 44 | MISO | Unspecified |
| 45 | PWDN | Unspecified |
| 46 | nRST | Unspecified |
| 47 | VCC3V3 | Unspecified |
| 48 | GND | Unspecified |
| 49 | EP | Unspecified |
Parts like it
1Questions
Is there a KiCad symbol and footprint for the W5200?
Yes. The symbol is EasyEDA_Cloud:W5200 and the footprint EasyEDA_Cloud:QFN-48_L7.0-W7.0-P0.50-BL-EP5.1, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the W5200?
QFN-48-EP(7x7), with 49 pins. Its footprint is drawn on this page.
Where is the W5200 datasheet?
WIZNET publishes it: the Datasheet link on this page opens it.
Where can I order the W5200?
JLCPCB lists it as part C14731, with 100 in stock; the sellers' links on this page open their listings.
What can replace the W5200?
Parts like it in the library: the DM9621ANP by DAVICOM. Check their datasheets: a part that fits the footprint may still differ in its ratings.