4 layers91.4 × 102.9 mm
FPGC4IOboard
bartpleiter/FPGC5
A completely self designed (game) computer, implemented in hardware using an FPGA. Basically every component is self designed, from the ISA up to the PCB and software.
150 parts6GPL-3.0
CH376T
WCH (Nanjing Qinheng Microelectronics)Extended
-40℃~+85℃ 12Mbps 3.3V、5V USB 2.0 USB to UART、USB to SPI SSOP-20-208mil USB Converters ROHS
- Part id
- wch/CH376T
- Category
- USB Converters
- Package
- SSOP-20-208mil
- Pins
- 20
- In stock
- 2,885 at JLCPCB (C21282)
- Used on
- 2 open-source boards
Overview
The CH376T is a USB Converter made by WCH (Nanjing Qinheng Microelectronics) in a SSOP-20-208mil package with 20 pins. -40℃~+85℃ 12Mbps 3.3V、5V USB 2.0 USB to UART、USB to SPI SSOP-20-208mil USB Converters ROHS.
PCBKit's library has its KiCad symbol (Interface:CH376T, from KiCad's library) and its footprint (Package_SO:SSOP-20_5.3x7.2mm_P0.65mm, from KiCad's library), ready for a KiCad board. 2,885 are in stock at JLCPCB (part C21282). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
20| Pin | Name | Type |
|---|---|---|
| 1 | INT | Output |
| 2 | RSTI | Input |
| 3 | SPI | Input |
| 4 | TXD | Input/output |
| 5 | RXD | Input |
| 6 | SD_DI | Input |
| 7 | V3 | Passive |
| 8 | UD+ | Input/output |
| 9 | UD- | Input/output |
| 10 | GND | Power in |
| 11 | XI | Input |
| 12 | XO | Output |
| 13 | SCS | Input |
| 14 | SCK | Input |
| 15 | SDI | Input |
| 16 | SDO | Tri-state |
| 17 | SD_CS | Open collector |
| 18 | SD_DO | Output |
| 19 | SD_CK | Output |
| 20 | VCC | Power in |
Open-source boards using it
2- 2 layers95.3 × 126.4 mm
FPGC4IOboard
RPG-7/FPGC4
The FPGC4 is a game console/PC that is implemented in an FPGA. It uses a self designed CPU and GPU architecture.
108 partsGPL-3.0
Parts like it
8
CH341T
SSOP-20-208mil-20℃~+70℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SSOP-20-208mil USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersMCP2200-I/SS
SSOP-20-208mil-40℃~+85℃ 13mA 1mbps 3V~5.5V 9uA USB 2.0 USB to UART SSOP-20-208mil USB Converters ROHSMicrochip TechnologyUSB ConvertersCH345T
SSOP-20100uA 2 2.9V~3.6V、4V~5.3V 7mA USB 2.0 USB to MIDI SSOP-20 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersMCP2210-I/SS
SSOP-20-208mil-40℃~+85℃ 13mA 3.3V~5.5V 9uA USB 2.0 USB to SPI SSOP-20-208mil USB Converters ROHSMicrochip TechnologyUSB ConvertersCH372C
SSOP-20-20℃~+70℃ 250uA 25mA 3.1V~3.6V、4.2V~5.4V USB 2.0 SSOP-20 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersCH374T
SSOP-20-208mil-40℃~+85℃ 12Mbps 3 3.3V、5V USB 2.0 USB to SPI SSOP-20-208mil USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersCH331A
SSOP-20-208mil3.3V、5V USB 2.0 SSOP-20-208mil USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersCH372
SSOP-20-208mil3.3V、5V USB 2.0 SSOP-20-208mil USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
Questions
Is there a KiCad symbol and footprint for the CH376T?
Yes. The symbol is Interface:CH376T and the footprint Package_SO:SSOP-20_5.3x7.2mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CH376T?
SSOP-20-208mil, with 20 pins. Its footprint is drawn on this page.
Where is the CH376T datasheet?
WCH (Nanjing Qinheng Microelectronics) publishes it: the Datasheet link on this page opens it.
Where can I order the CH376T?
JLCPCB lists it as part C21282, with 2,885 in stock; the sellers' links on this page open their listings.
What can replace the CH376T?
Parts like it in the library: the CH341T by WCH (Nanjing Qinheng Microelectronics), the MCP2200-I/SS by Microchip Technology, the CH345T by WCH (Nanjing Qinheng Microelectronics) and the MCP2210-I/SS by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the CH376T?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.