Skip to the content
123

TSOP4856

Vishay IntertechnologyExtended

-25℃~+85℃ 2.5V~5.5V 45m 56kHz 700uA 插件 Infrared Remote Receiver (IRM) ROHS

Part id
vishay/TSOP4856
Category
Infrared Remote Receiver (IRM)
Package
插件
Pins
3
In stock
93 at JLCPCB (C3742796)
Used on
12 open-source boards

Overview

The TSOP4856 is an infrared Remote Receiver made by Vishay Intertechnology in a 插件 package with 3 pins. -25℃~+85℃ 2.5V~5.5V 45m 56kHz 700uA 插件 Infrared Remote Receiver (IRM) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TSOP38538, from EasyEDA) and its footprint (EasyEDA_Cloud:SW-TH_3P-L7.5-W2.5-P2.54_AV440461, from EasyEDA), ready for a KiCad board. 93 are in stock at JLCPCB (part C3742796). 12 open-source boards in 3 repositories on GitHub use it.

Symbol

1OUT2GND3VS
EasyEDA_Cloud:TSOP38538From EasyEDA

Footprint

123
EasyEDA_Cloud:SW-TH_3P-L7.5-W2.5-P2.54_AV440461From EasyEDA

Pinout

3
The pins of the TSOP4856
PinNameType
1OUTUnspecified
2GNDUnspecified
3VSUnspecified

Open-source boards using it

12See all 12
  • 2 layers92.5 × 82.8 mmRifle and sensors, the printed circuit board in 3D

    Rifle and sensors

    DAlexis/caustic-lasertag-system

    Caustic project is a full-featured indoor and outdoor lasertag system

    268 parts16
  • 4 layers49.6 × 49 mmIR PCB, the printed circuit board in 3D

    IR PCB

    Kreyl/IR_PCB

    IR TX/RX PCB for competitions

    128 parts
  • 4 layers53.2 × 138.8 mmSndLocket, the printed circuit board in 3D

    SndLocket

    Kreyl/LocketSound

    226 parts
  • 2 layers92.5 × 96 mm10x10, the printed circuit board in 3D

    10x10

    DAlexis/caustic-lasertag-system

    Caustic project is a full-featured indoor and outdoor lasertag system

    176 parts16
  • 2 layers92.4 × 98.9 mmFixed hs g431-tube sensors, the printed circuit board in 3D

    Fixed hs g431-tube sensors

    DAlexis/caustic-lasertag-system

    Caustic project is a full-featured indoor and outdoor lasertag system

    149 parts16
  • 2 layers92.8 × 58.1 mmRound sensors usb, the printed circuit board in 3D

    Round sensors usb

    DAlexis/caustic-lasertag-system

    Caustic project is a full-featured indoor and outdoor lasertag system

    102 parts16
  • 2 layersSensor module, the printed circuit board in 3D

    Sensor module

    DAlexis/caustic-lasertag-system

    Caustic project is a full-featured indoor and outdoor lasertag system

    15 parts16
  • 2 layersSensor module, the printed circuit board in 3D

    Sensor module

    DAlexis/caustic-lasertag-system

    Caustic project is a full-featured indoor and outdoor lasertag system

    10 parts16

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TSOP4856?

Yes. The symbol is EasyEDA_Cloud:TSOP38538 and the footprint EasyEDA_Cloud:SW-TH_3P-L7.5-W2.5-P2.54_AV440461, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TSOP4856?

插件, with 3 pins. Its footprint is drawn on this page.

Where is the TSOP4856 datasheet?

Vishay Intertechnology publishes it: the Datasheet link on this page opens it.

Where can I order the TSOP4856?

JLCPCB lists it as part C3742796, with 93 in stock; the sellers' links on this page open their listings.

What can replace the TSOP4856?

Parts like it in the library: the DY-IRMA387-T1-1 by TONYU, the DY-IRMA386-T1-1 by TONYU, the TSSP4P38 by Vishay Intertechnology and the TSSP4038SS1XB by Vishay Intertechnology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TSOP4856?

12 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.