Skip to the content
12

MSS2P3-M3

Vishay IntertechnologyExtended

-55℃~+150℃ 1 Independent 250uA@30V 2A 30A 30V 600mV@2A MicroSMP Schottky Diodes ROHS

Part id
vishay/MSS2P3-M3
Category
Schottky Diodes
Package
MicroSMP
Pins
2
In stock
18,891 at JLCPCB (C466984)
Used on
6 open-source boards

Overview

The MSS2P3-M3 is a schottky Diode made by Vishay Intertechnology in a MicroSMP package with 2 pins. -55℃~+150℃ 1 Independent 250uA@30V 2A 30A 30V 600mV@2A MicroSMP Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (EasyEDA_Cloud:MICROSMP_L2.2-W1.3-LS2.5-RD, from EasyEDA), ready for a KiCad board. 18,891 are in stock at JLCPCB (part C466984). 6 open-source boards in 3 repositories on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
EasyEDA_Cloud:MICROSMP_L2.2-W1.3-LS2.5-RDFrom EasyEDA

From the datasheet

9
Reverse voltage, most
30 V · Maximum repetitive peak reverse voltage · p. 1
Forward current, most
2 A · Maximum average forward rectified current · p. 1
Junction, hottest
150 °C · Maximum operating junction temperature · p. 1
Forward voltage
440 mV · Typical at IF = 1.0 A, TA = 25 °C · p. 2
Forward voltage
520 mV · Typical at IF = 2.0 A, TA = 25 °C · p. 2
Forward voltage
360 mV · Typical at IF = 1.0 A, TA = 125 °C · p. 2
Forward voltage
470 mV · Typical at IF = 2.0 A, TA = 125 °C · p. 2
Junction to air (MicroSMP (DO-219AD))
105 K/W · Typical junction to ambient, PCB with 6.0 mm x 6.0 mm copper pad areas · p. 2
Junction to case (MicroSMP (DO-219AD))
20 K/W · Typical junction to case, top center of body · p. 2

What it is and has

4
Package
MicroSMP (DO-219AD) · p. 1
Circuit configuration
Single · p. 1
Profile
Typical height 0.65 mm · p. 1
Polarity identification
Color band denotes the cathode end · p. 1

Specifications

15
ParameterConditionsAs printedPage
Device marking codeMSS2P3typ 231
Maximum repetitive peak reverse voltage VRRMMSS2P3; TA = 25 °C unless otherwise notedmax 30 V1
Maximum average forward rectified current (fig. 1) IF(AV)TA = 25 °C unless otherwise notedmax 2 A1
Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSMTA = 25 °C unless otherwise notedmax 30 A1
Operating junction and storage temperature range TJ, TSTGmin -55 · max 150 °C1
Maximum instantaneous forward voltage VFIF = 1.0 A; TA = 25 °C; pulse test: 300 us pulse width, 1 % duty cycletyp 0.44 V2
Maximum instantaneous forward voltage VFIF = 2.0 A; TA = 25 °C; pulse test: 300 us pulse width, 1 % duty cycletyp 0.52 · max 0.6 V2
Maximum instantaneous forward voltage VFIF = 1.0 A; TA = 125 °C; pulse test: 300 us pulse width, 1 % duty cycletyp 0.36 V2
Maximum instantaneous forward voltage VFIF = 2.0 A; TA = 125 °C; pulse test: 300 us pulse width, 1 % duty cycletyp 0.47 · max 0.55 V2
Maximum reverse current IRRated VR; TA = 25 °C; pulse width ≤ 40 mstyp 15 · max 250 uA2
Maximum reverse current IRRated VR; TA = 125 °C; pulse width ≤ 40 mstyp 6 · max 20 mA2
Typical junction capacitance CJ4.0 V, 1 MHz; TA = 25 °Ctyp 65 pF2
Typical thermal resistance RJAMicroSMP (DO-219AD); TA = 25 °C; junction to ambient, mounted on PCB with 6.0 mm x 6.0 mm copper pad areastyp 105 °C/W2
Typical thermal resistance RJLMicroSMP (DO-219AD); TA = 25 °C; junction to lead, mounted on PCB with 6.0 mm x 6.0 mm copper pad areas; measured at cathode band terminaltyp 15 °C/W2
Typical thermal resistance RJCMicroSMP (DO-219AD); TA = 25 °C; measured at top center of bodytyp 20 °C/W2

Ordering codes, by the datasheet

3
MSS2P3-M3/89A
MicroSMP (DO-219AD) · Commercial grade; package code 89A; 4500 units on 7-inch diameter plastic tape and reel · p. 2
MSS2P3HM3/89A
MicroSMP (DO-219AD) · AEC-Q101 qualified; package code 89A; 4500 units on 7-inch diameter plastic tape and reel · p. 2
MSS2P3HM3_A/H
MicroSMP (DO-219AD) · AEC-Q101 qualified; revision A; package code H; 4500 units on 7-inch diameter plastic tape and reel · p. 2

Open-source boards using it

6
  • 6 layers90 × 153 mmBlackpants, the printed circuit board in 3D

    Blackpants

    o7-machinehum/Blackpants

    Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.

    300 parts189MIT
  • 4 layers89 × 61 mmBlocky breakout pcb, the printed circuit board in 3D

    Blocky breakout pcb

    o7-machinehum/RTShield

    Breakout board for a RPi.

    95 parts13
  • 4 layers90 × 153 mmBlackpants, the printed circuit board in 3D

    Blackpants

    o7-machinehum/Blackpants

    Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.

    139 parts189MIT
  • 2 layers38 × 43 mmEsp32-powerswitcher, the printed circuit board in 3D

    Esp32-powerswitcher

    matthieuvigne/MiAM_robotics

    Generic repo for robotic projects with the former MiAM Eurobot team !

    55 parts5GPL-3.0
  • 2 layers40 × 40 mmI2c mosfet, the printed circuit board in 3D

    I2c mosfet

    matthieuvigne/MiAM_robotics

    Generic repo for robotic projects with the former MiAM Eurobot team !

    40 parts5GPL-3.0
  • 4 layers56 × 65.6 mmMain pcb 2025, the printed circuit board in 3D

    Main pcb 2025

    matthieuvigne/MiAM_robotics

    Generic repo for robotic projects with the former MiAM Eurobot team !

    71 parts5GPL-3.0

Parts like it

4

Questions

Is there a KiCad symbol and footprint for the MSS2P3-M3?

Yes. The symbol is Device:D_Schottky and the footprint EasyEDA_Cloud:MICROSMP_L2.2-W1.3-LS2.5-RD, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MSS2P3-M3?

MicroSMP, with 2 pins. Its footprint is drawn on this page.

Where is the MSS2P3-M3 datasheet?

Vishay Intertechnology publishes it: the Datasheet link on this page opens it.

Where can I order the MSS2P3-M3?

JLCPCB lists it as part C466984, with 18,891 in stock; the sellers' links on this page open their listings.

What can replace the MSS2P3-M3?

Parts like it in the library: the V2PM12HM3/H by Vishay Intertechnology, the RB068VWM150TFTR by ROHM Semiconductor, the V2P6HM3/H by Vishay Intertechnology and the V2PM15HM3/H by Vishay Intertechnology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MSS2P3-M3?

6 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.