
PierogiNixiePSU
SonOfCheevap/PierogiNixie-PSU
A simple 12v to 150v-250v DC-DC Power supply for use with nixie tubes.
Vishay IntertechnologyExtended
-55℃~+150℃ 1.1V@2A 10uA@100V 2A 300V 50A 50ns DO-214AA(SMB) Fast Recovery / High Efficiency Diodes ROHS
The ES2F-E3 is a diodes, General Purpose made by Vishay Intertechnology in a SMB(DO-214AA) package with 2 pins. -55℃~+150℃ 1.1V@2A 10uA@100V 2A 300V 50A 50ns DO-214AA(SMB) Fast Recovery / High Efficiency Diodes ROHS.
PCBKit's library has its KiCad symbol (Device:D, from KiCad's library) and its footprint (Diode_SMD:D_SMB, from KiCad's library), ready for a KiCad board. 915 are in stock at JLCPCB (part C222525). 2 open-source boards in 1 repository on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Maximum repetitive peak reverse voltage VRRM | ES2F; TA = 25 °C | max 300 V | 1 |
| Working peak reverse voltage VRWM | ES2F; TA = 25 °C | max 225 V | 1 |
| Maximum RMS voltage VRMS | ES2F; TA = 25 °C | max 210 V | 1 |
| Maximum average forward rectified current at TL = 110 °C IF(AV) | ES2F; TL = 110 °C | max 2 A | 1 |
| Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM | ES2F; TA = 25 °C; 8.3 ms single half sine-wave superimposed on rated load | max 50 A | 1 |
| Operating junction and storage temperature range TJ, TSTG | ES2F | min -55 · max 150 °C | 1 |
| Maximum instantaneous forward voltage VF | ES2F; TA = 25 °C; 2.0 A; pulse test: 300 us pulse width, 1 % duty cycle | max 1.1 V | 2 |
| Maximum reverse current at VRRM IR | ES2F; TA = 25 °C | max 10 uA | 2 |
| Maximum reverse current at VRRM IR | ES2F; TA = 100 °C | max 200 uA | 2 |
| Maximum reverse recovery time trr | ES2F; TA = 25 °C; IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A | max 35 ns | 2 |
| Maximum reverse recovery time trr | ES2F; TA = 25 °C; IF = 1.0 A, dI/dt = 100 A/us, VR = 30 V, Irr = 0.1 IRM | max 50 ns | 2 |
| Maximum reverse recovery current IRM | ES2F; TA = 25 °C; IF = 1.0 A, dI/dt = 100 A/us, VR = 30 V, Irr = 0.1 IRM | max 3 A | 2 |
| Maximum stored charge Qrr | ES2F; TA = 25 °C; IF = 1.0 A, dI/dt = 100 A/us, VR = 30 V, Irr = 0.1 IRM | max 50 nC | 2 |
| Typical junction capacitance CJ | ES2F; TA = 25 °C; 4.0 V, 1 MHz | typ 15 pF | 2 |
| Maximum thermal resistance RJA | ES2F; DO-214AA (SMB); TA = 25 °C; mounted on PCB 5.0 mm x 5.0 mm (0.013 mm thick) land areas | max 75 °C/W | 2 |
| Maximum thermal resistance RJL | ES2F; DO-214AA (SMB); TA = 25 °C; mounted on PCB 5.0 mm x 5.0 mm (0.013 mm thick) land areas | max 25 °C/W | 2 |

SonOfCheevap/PierogiNixie-PSU
A simple 12v to 150v-250v DC-DC Power supply for use with nixie tubes.

SonOfCheevap/PierogiNixie-PSU
A simple 12v to 150v-250v DC-DC Power supply for use with nixie tubes.
Yes. The symbol is Device:D and the footprint Diode_SMD:D_SMB, both drawn on this page. PCBKit places them on a board for you when you design with it.
SMB(DO-214AA), with 2 pins. Its footprint is drawn on this page.
Vishay Intertechnology publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C222525, with 915 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the S3MB by hongjiacheng, the S3MB by MDD, the S2M by MDD and the S5MB by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.