USR-C322A
USR IOTExtended
SMD,29x19mm WiFi Modules ROHS
- Part id
- usr-iot/USR-C322A
- Category
- WiFi Modules
- Package
- SMD,29x19mm
- Pins
- 44
- In stock
- 8 at JLCPCB (C488050)
Overview
The USR-C322A is a wiFi Module made by USR IOT in a SMD,29x19mm package with 44 pins. SMD,29x19mm WiFi Modules ROHS.
PCBKit's library has its KiCad symbol (RF_WiFi:USR-C322, from KiCad's library) and its footprint (RF_WiFi:USR-C322, from KiCad's library), ready for a KiCad board. 8 are in stock at JLCPCB (part C488050).
Symbol
Footprint
Pinout
44| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | GPIO0 | Input/output |
| 3 | GPIO1 | Input/output |
| 4 | RESET | Input |
| 5 | SOP2 | Passive |
| 6 | SOP1 | Passive |
| 7 | SOP0 | Passive |
| 8 | ANA_DC-DC | Passive |
| 9 | NC | Not connected |
| 10 | NC | Not connected |
| 11 | GND | Passive |
| 12 | GND | Passive |
| 13 | VBT_CC | Power in |
| 14 | VDD_ANA2 | Power in |
| 15 | GPIO2 | Input/output |
| 16 | NC | Not connected |
| 17 | GND | Passive |
| 18 | GPIO3 | Input/output |
| 19 | UART0_TX | Output |
| 20 | UART0_RX | Input |
| 21 | RELOAD | Input |
| 22 | READY | Open collector |
| 23 | LINK | Open collector |
| 24 | UART0_CTS | Input |
| 25 | UART0_RTS | Output |
| 26 | GPIO4 | Input/output |
| 27 | GPIO5 | Input/output |
| 28 | GND | Passive |
| 29 | GND | Passive |
| 30 | UART1_TX | Output |
| 31 | UART1_RX | Input |
| 32 | GPIO6 | Input/output |
| 33 | GPIO7 | Input/output |
| 34 | GPIO8 | Input/output |
| 35 | GPIO9 | Input/output |
| 36 | GPIO10 | Input/output |
| 37 | GPIO11 | Input/output |
| 38 | GPIO12 | Input/output |
| 39 | NC | Not connected |
| 40 | NC | Not connected |
| 41 | GPIO13 | Input/output |
| 42 | NC | Not connected |
| 43 | NC | Not connected |
| 44 | GND | Passive |
Parts like it
4ESP32-C6-MINI-1-H8
SMD,16.6x13.2mm-40℃~+105℃ -99.2dBm、-96.8dBm、-93.6dBm 2.484GHz 20.5dBm 280mA、295mA、316mA、382mA 3V~3.6V 78mA、82mA ESP32-C6FH8 On-board PCB Antenna Thread1.3、IEEE802.15.4、IEEE802.11b/g/n/ax、Bluetooth5.3 UART、SPI、I2C SMD,16.6x13.2mm WiFi Modules ROHSEspressif SystemsWiFi ModulesE103-RTL8189FTV
SMD,12x12mm-20℃~+70℃ 16dBm 319mA 3V~3.5V 79mA RTL8189FTV-VC-CG SDIO SMD,12x12mm WiFi Modules ROHSChengdu Ebyte Elec TechWiFi ModulesESP32-S2-WROOM-I-N4(4MB)
SMD,31x18mm-40℃~+85℃ 19.5dBm 190mA 3V~3.6V 68mA ESP32-S2 IPEX interface UART、SPI、I2C、GPIO、I2S、USB SMD,31x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesUSR-WIFI232-A2
SMD-40℃~+85℃ -89dBm、-81dBm、-73dBm、-71dBm 17dBm、18dBm、19dBm 3.2V~3.6V On-board PCB Antenna UART、GPIO SMD WiFi Modules ROHSUSR IOTWiFi Modules
Questions
Is there a KiCad symbol and footprint for the USR-C322A?
Yes. The symbol is RF_WiFi:USR-C322 and the footprint RF_WiFi:USR-C322, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the USR-C322A?
SMD,29x19mm, with 44 pins. Its footprint is drawn on this page.
Where can I order the USR-C322A?
JLCPCB lists it as part C488050, with 8 in stock; the sellers' links on this page open their listings.
What can replace the USR-C322A?
Parts like it in the library: the ESP32-C6-MINI-1-H8 by Espressif Systems, the E103-RTL8189FTV by Chengdu Ebyte Elec Tech, the ESP32-S2-WROOM-I-N4(4MB) by Espressif Systems and the USR-WIFI232-A2 by USR IOT. Check their datasheets: a part that fits the footprint may still differ in its ratings.