Skip to the content
123

BSS138W-7-F

Unknown maker

Part id
unknown/BSS138W-7-F
Category
Uncategorised
Pins
3
Used on
7 open-source boards

Overview

The BSS138W-7-F is an uncategorised made by Unknown maker with 3 pins.

PCBKit's library has its KiCad symbol (Transistor_FET:BSS138, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 7 open-source boards in 7 repositories on GitHub use it.

Symbol

123
Transistor_FET:BSS138From KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

Pinout

3
The pins of the BSS138W-7-F
PinNameType
1GInput
2SPassive
3DPassive

Open-source boards using it

7
  • 2 layers89 × 55.5 mmMintypcb, the printed circuit board in 3D

    Mintypcb

    jackw01/pi-tin

    Open source raspberry pi handheld retro gaming console

    129 parts75CERN-OHL-W-2.0
  • 6 layers86.4 × 54.6 mmBeagleBone Black.unrouted, the printed circuit board in 3D

    BeagleBone Black.unrouted

    The-OpenROAD-Project-Attic/SA-PCB

    Annealing-based PCB placement tool

    275 parts44BSD-3-Clause
  • 4 layers94.1 × 59.1 mmSignalSlinger, the printed circuit board in 3D

    SignalSlinger

    OpenARDF/SignalSlinger

    An Automated Radio Orienteering Transmitter

    116 parts7MIT
  • 4 layers133.4 × 44.3 mmSignalSnagger, the printed circuit board in 3D

    SignalSnagger

    OpenARDF/SignalSnagger

    80m Radio Orienteering Receiver

    207 parts6MIT
  • 2 layers89 × 55.5 mmMintypcb, the printed circuit board in 3D

    Mintypcb

    SophBG/pi-tin-mod

    Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…

    158 parts1
  • 2 layers20.3 × 20.3 mmB VL53L7CX-2-BRK R1.0, the printed circuit board in 3D

    B VL53L7CX-2-BRK R1.0

    Boardoza/Boardoza_VL53L7CX-2_Multizone_Time-of-Flight_Distance_Sensor_Breakout_Board

    5V-compatible multizone Time-of-Flight distance sensor breakout board based on the VL53L7CX with 64-zone ranging capability.

    24 partsCC-BY-SA-4.0
  • 2 layers41.8 × 21.7 mmLoRa E5, the printed circuit board in 3D

    LoRa E5

    B1jam1-74/Projet_Ruche_groupe_1

    Le microcontrôleur fait interface avec les capteurs (HX711 + DS18B20) et le module LoRa, qui pousse les trames vers une gateway LoRaWAN puis un serveur web.

    36 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BSS138W-7-F?

Yes. The symbol is Transistor_FET:BSS138 and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What can replace the BSS138W-7-F?

Parts like it in the library: the XC6206P182MR by TECH PUBLIC, the JTD6206-3.3V by JTD, the BAT54S by TDSEMIC and the BC847A-TD by TDSEMIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BSS138W-7-F?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.