ATMEGA328P-AU
Unknown maker
- Part id
- unknown/ATMEGA328P-AU
- Category
- Uncategorised
- Pins
- 32
Overview
The ATMEGA328P-AU is an uncategorised made by Unknown maker with 32 pins.
PCBKit's library has its KiCad symbol (MCU_Microchip_ATmega:ATmega328P-A, from KiCad's library) and its footprint (Package_QFP:TQFP-32_7x7mm_P0.8mm, from KiCad's library), ready for a KiCad board.
Symbol
Footprint
Pinout
32| Pin | Name | Type |
|---|---|---|
| 1 | PD3 | Input/output |
| 2 | PD4 | Input/output |
| 3 | GND | Power in |
| 4 | VCC | Power in |
| 5 | GND | Passive |
| 6 | VCC | Passive |
| 7 | XTAL1/PB6 | Input/output |
| 8 | XTAL2/PB7 | Input/output |
| 9 | PD5 | Input/output |
| 10 | PD6 | Input/output |
| 11 | PD7 | Input/output |
| 12 | PB0 | Input/output |
| 13 | PB1 | Input/output |
| 14 | PB2 | Input/output |
| 15 | PB3 | Input/output |
| 16 | PB4 | Input/output |
| 17 | PB5 | Input/output |
| 18 | AVCC | Power in |
| 19 | ADC6 | Input |
| 20 | AREF | Passive |
| 21 | GND | Passive |
| 22 | ADC7 | Input |
| 23 | PC0 | Input/output |
| 24 | PC1 | Input/output |
| 25 | PC2 | Input/output |
| 26 | PC3 | Input/output |
| 27 | PC4 | Input/output |
| 28 | PC5 | Input/output |
| 29 | RESET/PC6 | Input/output |
| 30 | PD0 | Input/output |
| 31 | PD1 | Input/output |
| 32 | PD2 | Input/output |
Parts like it
8AD7938BSUZ
TQFP-32(7x7)-40℃~+85℃ 1.5MHz 12 1LSB 2.7V~5.25V 8 Parallel port TQFP-32(7x7) Analog to Digital Converters (ADC) ROHSAnalog DevicesUncategorisedAVR32DD32-E/PT
TQFP-32(7x7)UncategorisedMicrochip TechnologyATMEGA328P-AU
TQFP-32_L7.0-W7.0-P0.80-LS9.0TLTQFP-32(7x7) SMT ROHSJLCPCB AssemblyUncategorisedATMEGA328P-AU-YJLTY
TQFP-32TQFP-32(7x7) New Arrivals ROHSMicrochip TechnologyUncategorisedATXMEGA8E5-AU
UncategorisedUnknown makerAMG8803-QPBR
QFP-32(7x7)UncategorisedAmagicTechKF8TS2716QP
QFP-32_L7.0-W7.0-P0.80-LS9.0-BLQFP-32_L7.0-W7.0-P0.80-LS9.0-BL New Arrivals ROHSChipONUncategorisedEPC2TC32N
TQFP-32(7x7)TQFP-32(7x7) Memory - Configuration Proms for FPGAs ROHSIntel/AlteraUncategorised
Questions
Is there a KiCad symbol and footprint for the ATMEGA328P-AU?
Yes. The symbol is MCU_Microchip_ATmega:ATmega328P-A and the footprint Package_QFP:TQFP-32_7x7mm_P0.8mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What can replace the ATMEGA328P-AU?
Parts like it in the library: the AD7938BSUZ by Analog Devices, the AVR32DD32-E/PT by Microchip Technology, the ATMEGA328P-AU by JLCPCB Assembly and the ATMEGA328P-AU-YJLTY by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.