Skip to the content
1234

LM317DCYR

UMWExtended

0℃~+125℃@(Tj) 1 1.2V~37V 1.5A 12mA 40V 66dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
umw/LM317DCYR
Category
Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package
SOT-223
Pins
4
In stock
14,061 at JLCPCB (C3014305)
Used on
7 open-source boards

Overview

The LM317DCYR is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by UMW in a SOT-223 package with 4 pins. 0℃~+125℃@(Tj) 1 1.2V~37V 1.5A 12mA 40V 66dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (dk_PMIC-Voltage-Regulators-Linear:LM317DCYR, from Digikey) and its footprint (Package_TO_SOT_SMD:SOT-223, from KiCad's library), ready for a KiCad board. 14,061 are in stock at JLCPCB (part C3014305). 7 open-source boards in 6 repositories on GitHub use it.

Symbol

ADJ1OUT2IN3OUT4
dk_PMIC-Voltage-Regulators-Linear:LM317DCYRFrom Digikey

Footprint

1234
Package_TO_SOT_SMD:SOT-223From KiCad's library

From the datasheet

3
Junction, hottest
125 °C · maximum junction temperature · p. 2
Gives
1.5 A · rated load current · p. 1
Feedback reference
1.25 V · typical feedback reference voltage · p. 3

What it is and has

3
Protection
Internal thermal overload protection · p. 1
Protection
Internal short circuit current limiting · p. 1
Adjustable output voltage
1.2 to 37 V · p. 1

Around it

3
cap 10µF
between A and GND; Optional adjustment capacitor; connected between adjustment pin and ground. · p. 3
cap 0.1µF
between I and GND; CI; required when regulator is an appreciable distance from the power supply filter. · p. 4
cap 1µF
between O and GND; CO; improves transient response; not needed for stability. · p. 4

Specifications

24
ParameterConditionsAs printedPage
Input-Output Voltage Differential VI-VOmax 40 V2
Lead Temperature TLEADmax 230 °C2
Power Dissipation PDSOT-223max 1 W2
Junction Temperature Range TJmin 0 · max 125 °C2
Storage Temperature Range TSTGmin -55 · max 125 °C2
Temperature Coefficient of Output Voltage ΔVO/ΔTValue printed as ±0.02min -0.02 · max 0.02 %/°C2
Line Regulation (note1) RlineTA=25°C, 3V≤VI-VO≤40Vtyp 0.01 · max 0.04 %/V3
Line Regulation (note1) Rline3V≤VI-VO≤40Vtyp 0.02 · max 0.07 %/V3
Load Regulation (note1) RloadTA=25°C, 10mA≤IO≤IMAX, VO<5Vtyp 18 · max 25 mV3
Load Regulation (note1) RloadTA=25°C, 10mA≤IO≤IMAX, VO≥5V; unit placement ambiguoustyp 0.4 · max 0.53
Load Regulation (note1) Rload10mA≤IO≤IMAX, VO<5Vtyp 40 · max 70 %VO3
Load Regulation (note1) Rload10mA≤IO≤IMAX, VO≥5V; unit placement ambiguoustyp 0.8 · max 1.53
Adjustable Pin Current IADJtyp 46 · max 100 uA3
Adjustable Pin Current Change ΔIADJ3V≤VI-VO≤40V, 10mA≤IO≤IMAX,PD≤ PMAXtyp 2 · max 5 uA3
Reference Voltage VREF3V≤VIN-VO≤40V, 10mA≤IO≤IMAX,PD≤ PMAXmin 1.2 · typ 1.25 · max 1.3 V3
Temperature Stability STTtyp 0.7 %/VO3
Minimum Load Current to Maintain Regulation IL(MIN)VI-VO=40Vtyp 3.5 · max 12 mA3
Maximum Output Current IO(MAX)TA=25°C, VI-VO≤15V, PD≤PMAXtyp 2.2 A3
Maximum Output Current IO(MAX)TA=25°C, VI-VO≤40V, PD≤PMAXtyp 0.3 A3
RMS Noise,% of VOUT eNTA=25°C, 10Hz≤f≤10KHztyp 0.003 · max 0.01 %/VO3
Ripple Rejection RRVO=10V, f=120Hz without CADJtyp 60 dB3
Ripple Rejection RRVO=10V, f=120Hz, CADJ=10uF(note2)typ 75 dB3
Long-Term Stability,TJ=THIGH STTA=25°C for end point mesasurements, 1000HRtyp 0.3 · max 1 %3
Thermal Resistance Junction to case RθJCPackage not specifiedtyp 25.2 °C/W3

Pins, by the datasheet

3
1 A
Adj · p. 1
2 O
Output · p. 1
3 I
Input · p. 1

Ordering codes, by the datasheet

4
UMW LM317DCYR
SOT-223 · LM317 marking; base quantity 2500; tape and reel · p. 9
UMW LM317G
SOT-223 · LM317G marking; base quantity 2500; tape and reel · p. 9
UMW LM317MDT
TO-252 · LM317M marking; base quantity 2500; tape and reel · p. 9
UMW LM317T
TO-220 · LM317T marking; base quantity 1000; tube and box · p. 9

Open-source boards using it

7
  • 6 layers100 × 114 mmMTE USB HUB, the printed circuit board in 3D

    MTE USB HUB

    MicroType-Engineering/MTE_USB_HUB

    As designed on the MicroType Engineering's YouTube series: https://youtu.be/uzqXgHHZUUs

    159 parts41GPL-2.0
  • 8 layers85 × 55 mmDadu 8L 2side 85x55, the printed circuit board in 3D

    Dadu 8L 2side 85x55

    comedy1982-spec/pcb-viewer

    Dadu 기반 ELD 솔레노이드 ECU. 12 V 입력, TC364 · CAN-FD · PMIC, PCB 위 센서는 NTC 하나. A4911(3상 드라이버)의 A·B 레그로 H-브리지(하프브리지 IAUC60N04S6N050H ×2, 레그 션트 2 mΩ ×2), C 레그는 비워 두고 SPI로 그 고장(VC · CHO · CLO · OC3)을 마스크.

    130 parts
  • 6 layers177.8 × 114.3 mmMotherboard, the printed circuit board in 3D

    Motherboard

    js214/FS720_layout

    Schematics and PCB layout for FS720

    308 parts
  • 4 layers63.5 × 57.1 mmCustom ESPC5, the printed circuit board in 3D

    Custom ESPC5

    MARS-UVA/Custom-ESP-Board

    Custom PCB for the ESP32-C5-WROOM-1U module.

    47 parts
  • 2 layers45 × 30 mmSolar NiMH emulation, the printed circuit board in 3D

    Solar NiMH emulation

    peteEH/USB-battery-source

    USB Mini to 4 outputs using linear regulator - set for 1.5V (NiMH or AA battery source)

    21 parts
  • 8 layers90 × 60 mmDadu 8L A4911 10A 40A 90x60, the printed circuit board in 3D

    Dadu 8L A4911 10A 40A 90x60

    comedy1982-spec/pcb-viewer

    Dadu 기반 ELD 솔레노이드 ECU. 12 V 입력, TC364 · CAN-FD · PMIC, PCB 위 센서는 NTC 하나. A4911(3상 드라이버)의 A·B 레그로 H-브리지(하프브리지 IAUC60N04S6N050H ×2, 레그 션트 2 mΩ ×2), C 레그는 비워 두고 SPI로 그 고장(VC · CHO · CLO · OC3)을 마스크.

    130 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM317DCYR?

Yes. The symbol is dk_PMIC-Voltage-Regulators-Linear:LM317DCYR and the footprint Package_TO_SOT_SMD:SOT-223, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM317DCYR?

SOT-223, with 4 pins. Its footprint is drawn on this page.

Where is the LM317DCYR datasheet?

UMW publishes it: the Datasheet link on this page opens it.

Where can I order the LM317DCYR?

JLCPCB lists it as part C3014305, with 14,061 in stock; the sellers' links on this page open their listings.

What can replace the LM317DCYR?

Parts like it in the library: the LM317G by UMW, the LM317 by TDSEMIC, the TL1963A-33DCY by Texas Instruments and the BL8071GCLATR33 by BL. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM317DCYR?

7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.