10 layers120 × 120 mm
K410t devboard
antmicro/kintex-410t-devboard
This repository contains open hardware design files for a devkit created for AMD-Xilinx Kintex-7 K410T FPGA.
1,020 parts46Apache-2.0
RCW-0C
TYCO ELECTRONICS
1206 (3216) Surface Mount Test Point
tyco-electronics/RCW-0C
- Category
- Uncategorised
- Pins
- 1
Overview
The RCW-0C is an uncategorised made by TYCO ELECTRONICS with 1 pins. 1206 (3216) Surface Mount Test Point.
PCBKit's library has its KiCad symbol (Connectors:Test Point, from CERN's library) and its footprint (TYCO SMD:TYCO_RCW-0C, from CERN's library), ready for a KiCad board. 8 open-source boards in 8 repositories on GitHub use it.
Symbol
Footprint
Pinout
1| Pin | Name | Type |
|---|---|---|
| 1 | 1 | Input/output |
Open-source boards using it
All 8- 12 layers165 × 102.7 mm
Data center rdimm ddr5-tester
antmicro/rdimm-ddr5-tester
FPGA-based DRAM tester supporting RDIMM DDR5 memories
797 parts44Apache-2.0 - 12 layers152.9 × 90 mm
Data center rdimm ddr4-tester
antmicro/rdimm-ddr4-tester
Experimental platform built around Xilinx Kintex-7 FPGA for development and customization of RAM controllers supporting RDIMM DDR4 RAM modules used in data centers.
691 parts32Apache-2.0 - 4 layers99.1 × 66 mm
2057-ICE40HX4K TQ144-breakout
johnwinans/2057-ICE40HX4K-TQ144-breakout
Minimal Raspberry PI breakout board for ICE40HX4K FPGA
75 parts25 - 8 layers90 × 120.4 mm
Ecp5-dc scm
antmicro/ecp5-dc-scm
Experimental Lattice ECP5-driven Data Center Security Communication Module
506 parts23Apache-2.0 - 10 layers120.4 × 90 mm
Bmc reference carrier board
antmicro/dc-scm-osm-l-carrier-card
DC-SCM Card supporting OSM-L System on Modules
568 parts13Apache-2.0 - 2 layers105.7 × 50.8 mm
- 12 layers138 × 102.7 mm
Sodimm ddr5-tester
ryanlopez26/ddr5_tester
The Antmicro tester with current sensing capabilities
730 partsApache-2.0
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/tyco-electronics/RCW-0C" title="RCW-0C in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/tyco-electronics/RCW-0C.jpg" alt="RCW-0C" width="1200" height="900">[](https://pcbkit.io/parts/tyco-electronics/RCW-0C)Questions
Is there a KiCad symbol and footprint for the RCW-0C?
Yes. The symbol is Connectors:Test Point and the footprint TYCO SMD:TYCO_RCW-0C, both drawn on this page. PCBKit places them on a board for you when you design with it.
What can replace the RCW-0C?
Parts like it in the library: the RCW-0C by TE Connectivity. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the RCW-0C?
8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
