Skip to the content
12345678

OPA2376

TokmasExtended

TSSOP-8 Precision Op Amps ROHS

Part id
tokmas/OPA2376
Category
Precision Op Amps
Package
TSSOP-8
Pins
8
In stock
3,128 at JLCPCB (C7470935)
Used on
3 open-source boards

Overview

The OPA2376 is a precision Op Amp made by Tokmas in a TSSOP-8 package with 8 pins. TSSOP-8 Precision Op Amps ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:OPA2376, from EasyEDA) and its footprint (Package_SO:TSSOP-8_4.4x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 3,128 are in stock at JLCPCB (part C7470935). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

8VDD4VSS2IN A-3IN A+1OUT A
EasyEDA_Cloud:OPA2376From EasyEDA

Footprint

12345678
Package_SO:TSSOP-8_4.4x3mm_P0.65mmFrom KiCad's library

Pinout

8
The pins of the OPA2376
PinNameType
1OUT AOutput
2IN A-Unspecified
3IN A+Unspecified
4VSSUnspecified
5IN B+Unspecified
6IN B-Unspecified
7OUT BOutput
8VDDUnspecified

Open-source boards using it

3
  • 4 layers159.6 × 130 mmFE UFPR 4 0, the printed circuit board in 3D

    FE UFPR 4 0

    josearistidesbail/FE_UFPR_4_0

    KiCad 10 project for the board that sits between a TI LAUNCHXL-F28379D (runs the FOC firmware) and an Infineon PrimeSTACK 6PS04512E43W39693 inverter driving an EMRAX 208 motor.

    374 parts
  • 4 layers95 × 62 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    21 parts
  • 4 layers19 × 38 mmGrainguard, the printed circuit board in 3D

    Grainguard

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    21 parts

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the OPA2376?

Yes. The symbol is EasyEDA_Cloud:OPA2376 and the footprint Package_SO:TSSOP-8_4.4x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA2376?

TSSOP-8, with 8 pins. Its footprint is drawn on this page.

Where can I order the OPA2376?

JLCPCB lists it as part C7470935, with 3,128 in stock; the sellers' links on this page open their listings.

What can replace the OPA2376?

Parts like it in the library: the DIO2352TP8 by DIOO, the TS27L2IPT by STMicroelectronics, the TLC2252AQPWRG4Q1 by Texas Instruments and the AD8572ARU by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA2376?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.