Skip to the content
12345678

UCC5304DWVR

Texas InstrumentsExtended

-40℃~+125℃@(Ta) 0.8V~1.25V 1 1.6V~2V 100kV/us 12ns 16ns 2000uA 3V~5.5V 40ns 40ns 4A 5000 6A 6V~18V MOSFET SOIC-8-300mil Isolators - Gate Drivers ROHS

Part id
ti/UCC5304DWVR
Category
Isolators, Gate Drivers
Package
SOIC-8-300mil
Pins
8
In stock
236 at JLCPCB (C2878299)
Used on
5 open-source boards

Overview

The UCC5304DWVR is an isolators, Gate Driver made by Texas Instruments in a SOIC-8-300mil package with 8 pins. -40℃~+125℃@(Ta) 0.8V~1.25V 1 1.6V~2V 100kV/us 12ns 16ns 2000uA 3V~5.5V 40ns 40ns 4A 5000 6A 6V~18V MOSFET SOIC-8-300mil Isolators - Gate Drivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:UCC5304DWVR, from EasyEDA) and its footprint (Package_SO:SOIC-8_7.5x5.85mm_P1.27mm, from KiCad's library), ready for a KiCad board. 236 are in stock at JLCPCB (part C2878299). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

1IN2VCCI3VCCI4GND5VSS6VSS7OUT8VDD
EasyEDA_Cloud:UCC5304DWVRFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_7.5x5.85mm_P1.27mmFrom KiCad's library

From the datasheet

14
Supply, least
3 V · VCCI, recommended operating min · p. 4
Supply, most
5.5 V · VCCI, recommended operating max · p. 4
Supply, least
6 V · VDD, recommended operating min · p. 4
Supply, most
18 V · VDD, recommended operating max · p. 4
Supply, absolute maximum
6 V · VCCI to GND, absolute max · p. 4
Supply, absolute maximum
20 V · VDD-VSS, absolute max · p. 4
Works from
-40 °C · TA, operating ambient min · p. 4
Works up to
125 °C · TA, operating ambient max · p. 4
Junction, hottest
150 °C · TJ, absolute max · p. 4
Takes working
5 mA · sum of VCCI and VDD operating currents, typical, 500 kHz, COUT = 100 pF, VDD = 12 V · p. 8
Junction to air (DWV (SOIC))
108.5 K/W · junction-to-ambient thermal resistance · p. 5
Junction to case (DWV (SOIC))
52 K/W · junction-to-case (top) thermal resistance · p. 5
Junction to board (DWV (SOIC))
58.6 K/W · junction-to-board thermal resistance · p. 5
Supply, least
9.2 V · VDD, recommended operating min · p. 22

What it is and has

11
Isolation
Reinforced · p. 1
Peak output current
4-A source, 6-A sink · p. 1
Propagation delay
40-ns maximum · p. 1
Delay matching
5-ns maximum · p. 1
Pulse-width distortion
5.5-ns maximum · p. 1
VDD power-up delay
35-µs maximum · p. 1
Input compatibility
TTL and CMOS · p. 1
Input pulse rejection
Rejects pulses shorter than 5-ns · p. 1
Package
DWV-8 (SOIC), 5-V UVLO · p. 1
Isolation
Reinforced isolation · p. 1
Common-mode transient immunity
greater than 100 V/ns · p. 1

Around it

7
res 51 Ω
between PWM and IN; Example series input filter resistor; used with 33 pF capacitor. · p. 20
cap 33 pF
between IN and GND; Example input filter capacitor; used with 51 Ω resistor. · p. 20
cap 10 µF
between VDD and VSS; 50-V MLCC selected for CVDD, in parallel with 220 nF. · p. 21
cap 220 nF
between VDD and VSS; 50-V MLCC selected for CVDD, in parallel with 10 uF. · p. 21
cap ≈10 µF
between VDD and VSS; Low-ESR ceramic surface-mount local bypass capacitor for device biasing; place close to the device. · p. 22
cap ≤100 nF
between VDD and VSS; Low-ESR ceramic surface-mount capacitor in parallel with the bias capacitor for high-frequency filtering. · p. 22
cap 100 nF
between VCCI and GND; Minimum recommended input-supply bypass capacitance. · p. 22

Specifications

62
ParameterConditionsAs printedPage
Input bias pin supply voltageVCCI to GNDmin -0.5 · max 6 V4
Driver bias supplyVDD-VSSmin -0.5 · max 20 V4
Output signal voltageOUT to VSS; maximum VVDD+0.5 Vmin -0.5 V4
Output signal voltageOUT to VSS, Transient for 200 ns; maximum VVDD+0.5 Vmin -2 V4
Input signal voltageIN to GND; maximum VVCCI+0.5 Vmin -0.5 V4
Input signal voltageIN Transient to GND for 200ns; maximum VVCCI+0.5 Vmin -2 V4
Junction temperature, TJ TJmin -40 · max 150 °C4
Storage temperature, Tstg Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±4000 Vmax 4000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1500 Vmax 1500 V4
VCCI Input supply voltage VCCIOver operating free-air temperature rangemin 3 · max 5.5 V4
Driver output bias supply VDDOver operating free-air temperature rangemin 6 · max 18 V4
Junction Temperature TJmin -40 · max 130 °C4
Ambient Temperature TAmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJADWV (SOIC), 8 PINStyp 108.5 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)DWV (SOIC), 8 PINStyp 52 °C/W5
Junction-to-board thermal resistance RθJBDWV (SOIC), 8 PINStyp 58.6 °C/W5
Junction-to-top characterization parameter ψJTDWV (SOIC), 8 PINStyp 32.7 °C/W5
Junction-to-board characterization parameter ψJBDWV (SOIC), 8 PINStyp 56.6 °C/W5
Power dissipation PDVCCI = 5.0 V; VDD = 12 V; IN = 3.3-V, 2.36-MHz 50% duty cycle square wave; 1.0-nF load on OUTmax 0.7 W5
Power dissipation by transmitter side PDIVCCI = 5.0 V; VDD = 12 V; IN = 3.3-V, 2.36-MHz 50% duty cycle square wave; 1.0-nF load on OUTmax 0.015 W5
Power dissipation by driver side PDOVCCI = 5.0 V; VDD = 12 V; IN = 3.3-V, 2.36-MHz 50% duty cycle square wave; 1.0-nF load on OUTmax 0.685 W5
External clearance CLRShortest pin-to-pin distance through air; value > 8.5 mmmin 8.5 mm6
External creepage CPGShortest pin-to-pin distance across the package surface; value > 8.5 mmmin 8.5 mm6
Distance through the insulation DTIMinimum internal gap (internal clearance); value > 17 ummin 17 um6
Comparative tracking index CTIDIN EN 60112 (VDE 0303-11); IEC 60112; value > 600 Vmin 600 V6
Maximum repetitive peak isolation voltage VIORMDIN V VDE V 0884-11:2017-01; AC voltage (bipolar)max 1500 VPK6
Maximum working isolation voltage VIOWMDIN V VDE V 0884-11:2017-01; AC voltage (sine wave); time dependent dielectric breakdown (TDDB) testmax 1060 VRMS6
Maximum working isolation voltage VIOWMDIN V VDE V 0884-11:2017-01; DC Voltagemax 1500 VDC6
Maximum transient isolation voltage VIOTMVTEST = VIOTM, t = 60 s (qualification); VTEST = 1.2 × VIOTM, t = 1 s (100% production)max 7000 VPK6
Maximum surge isolation voltage VIOSMTest method per IEC 62368-1, 1.2/50 us waveform, VTEST = 1.6 × VIOSM (qualification)max 8000 VPK6
Apparent charge qpdMethod a, After I/O safety test subgroup 2/3, Vini = VIOTM, tini = 60 s; Vpd(m) = 1.2 × VIORM, tm = 10 smax 5 pC6
Apparent charge qpdMethod a, After environmental tests subgroup 1, Vini = VIOTM, tini = 60 s; Vpd(m) = 1.6 × VIORM = 2400 VPK, tm = 10 smax 5 pC6
Apparent charge qpdMethod b1; At routine test (100% production) and preconditioning (type test); Vini = 1.2 × VIOTM; tini = 1 s; Vpd(m) = 1.875 × VIORM = 2813 VPK, tm = 1 smax 5 pC6
Barrier capacitance, input to output CIOVIO = 0.4 sin (2πft), f =1 MHz; all pins on each side of the barrier tied together creating a two-pin devicetyp 0.5 pF6
Pollution degreeValue 2typ 26
Withstand isolation voltage VISOUL 1577; VTEST = VISO = 5700 VRMS, t = 60 s (qualification); VTEST = 1.2 × VISO = 6840 VRMS, t = 1 s (100% production)max 5000 VRMS6
Safety output supply current ISDRIVER side; RθJA = 108.5ºC/W, VVDD = 12 V, TJ = 150°C, TA = 25°Cmax 96 mA7
Safety supply power PSINPUT side; RθJA = 108.5ºC/W, VVCCI = 5.5 V, TJ = 150°C, TA = 25°Cmax 0.015 W7
Safety supply power PSDRIVER side; RθJA = 108.5ºC/W, VVCCI = 5.5 V, TJ = 150°C, TA = 25°Cmax 1.135 W7
Safety supply power PSTOTAL; RθJA = 108.5ºC/W, VVCCI = 5.5 V, TJ = 150°C, TA = 25°Cmax 1.15 W7
Safety temperature TSmax 150 °C7
VCCI quiescent current IVCCIVIN = 0 V; VVCCI = 3.3 V or 5.0 V; VVDD = 12 V; TA = –40°C to +125°Ctyp 1.5 · max 2 mA8
VDD quiescent current IVDDVIN = 0 V; VVCCI = 3.3 V or 5.0 V; VVDD = 12 V; TA = –40°C to +125°Ctyp 1 · max 1.8 mA8
VCCI operating current IVCCI(f = 500 kHz) operating current; VVCCI = 3.3 V or 5.0 V; VVDD = 12 V; TA = –40°C to +125°Ctyp 2.5 mA8
VDD operating current IVDD(f = 500 kHz) operating current; COUT = 100 pF; VVDD = 12 V; VVCCI = 3.3 V or 5.0 V; TA = –40°C to +125°Ctyp 2.5 mA8
UVLO Rising threshold VVCCI_ONVCC SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDSmin 2.55 · typ 2.7 · max 2.85 V8
UVLO Falling threshold VVCCI_OFFVCC SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDSmin 2.35 · typ 2.5 · max 2.65 V8
UVLO Threshold hysteresis VVCCI_HYSVCC SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDStyp 0.2 V8
UVLO Rising threshold VVDDVDD SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDSmin 5 · typ 5.5 · max 5.9 V8
UVLO Falling threshold VVDD_OFFVDD SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDSmin 4.7 · typ 5.2 · max 5.6 V8
UVLO Threshold hysteresis VVDD_HYSVDD SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDStyp 0.3 V8
Input high threshold voltage VINHVVCCI = 3.3 V or 5.0 V; VVDD = 12 V; TA = –40°C to +125°Cmin 1.6 · typ 1.8 · max 2 V8
Input low threshold voltage VINLVVCCI = 3.3 V or 5.0 V; VVDD = 12 V; TA = –40°C to +125°Cmin 0.8 · typ 1 · max 1.25 V8
Input threshold hysteresis VIN_HYSVVCCI = 3.3 V or 5.0 V; VVDD = 12 V; TA = –40°C to +125°Ctyp 0.8 V8
Peak output source current IO+CVDD = 10 uF, CLOAD = 0.18 uF, f = 1 kHz, bench measurementtyp 4 A8
Peak output sink current IO-CVDD = 10 uF, CLOAD = 0.18 uF, f = 1 kHz, bench measurementtyp 6 A8
Output resistance at high state ROHIOUT = –10 mA; ROHA, ROHB do not represent drive pull-up performance; see tRISE in Switching Characteristics and Output Stagetyp 5 Ω8
Output resistance at low state ROLIOUT = 10 mAtyp 0.55 Ω8
Output voltage at high state VOHVVDD = 12 V, IOUT = –10 mAtyp 11.95 V8
Output voltage at low state VOLVVDD = 12 V, IOUT = 10 mAtyp 5.5 mV8
Driver output (VOUT) active pull down VOAPDVVDD, IOUT = 200 mAtyp 1.75 · max 2.1 V8

Pins, by the datasheet

8
1 IN
TTL/CMOS compatible signal input, internally pulled low if open; tie to ground if unused for better noise immunity. · p. 3
2 VCCI
Primary-side supply; locally decouple to GND using a low ESR/ESL capacitor as close to the device as possible. · p. 3
3 VCCI
Primary-side supply; locally decouple to GND using a low ESR/ESL capacitor as close to the device as possible. · p. 3
4 GND
Primary-side ground reference for all primary-side signals. · p. 3
5 VSS
Ground for secondary-side driver. · p. 3
6 VSS
Ground for secondary-side driver. · p. 3
7 OUT
Driver output; connect to the gate of the FET or IGBT. · p. 3
8 VDD
Secondary-side driver supply; locally decouple to VSS using a low ESR/ESL capacitor as close to the device as possible. · p. 3

Ordering codes, by the datasheet

5
UCC5304DWV
SOIC (DWV) · Obsolete; 8 pins; operating temperature -40 to 125 °C. · p. 28
UCC5304DWVR
SOIC (DWV) · Active; 8 pins; 1000 per large tape and reel; operating temperature -40 to 125 °C. · p. 28
UCC5304DWVR.A
SOIC (DWV) · Active; 8 pins; 1000 per large tape and reel; operating temperature -40 to 125 °C. · p. 28
UCC5304DWVRG4
SOIC (DWV) · Active; 8 pins; 1000 per large tape and reel; operating temperature -40 to 125 °C. · p. 28
UCC5304DWVRG4.A
SOIC (DWV) · Active; 8 pins; 1000 per large tape and reel; operating temperature -40 to 125 °C. · p. 28

Open-source boards using it

5
  • 2 layers130.8 × 134.4 mmMyFirstBuck, the printed circuit board in 3D

    MyFirstBuck

    ManveerA/Buck_Converter_PCB

    Repository for Buck Converter PCB design project for ELEC-4450 Power Electronics.

    50 parts1
  • 2 layers130.8 × 147.6 mmBuck Converter, the printed circuit board in 3D

    Buck Converter

    adamino-moss/adams-buck

    46 parts
  • 2 layers143.5 × 129.5 mmBuck PCB, the printed circuit board in 3D

    Buck PCB

    CollinObrien1/Custom-Buck-Converter

    Custom Buck PCB for Power Electronics

    49 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the UCC5304DWVR?

Yes. The symbol is EasyEDA_Cloud:UCC5304DWVR and the footprint Package_SO:SOIC-8_7.5x5.85mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the UCC5304DWVR?

SOIC-8-300mil, with 8 pins. Its footprint is drawn on this page.

Where is the UCC5304DWVR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the UCC5304DWVR?

JLCPCB lists it as part C2878299, with 236 in stock; the sellers' links on this page open their listings.

What can replace the UCC5304DWVR?

Parts like it in the library: the CA-IS3211SCG by Chipanalog, the CA-IS3211VBG by Chipanalog, the UCC5390ECDWVR by Texas Instruments and the CA-IS3213MCG by Chipanalog. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the UCC5304DWVR?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.