UCC2895N
Texas InstrumentsExtended
-40℃~+85℃@(Ta) 100% 10V~16.5V 1MHz Full-Bridge DIP-20 AC-DC Controllers and Regulators ROHS
- Part id
- ti/UCC2895N
- Category
- AC DC Controllers And Regulators
- Package
- DIP-20
- Pins
- 20
- In stock
- 4 at JLCPCB (C701475)
Overview
The UCC2895N is an AC DC Controllers And Regulator made by Texas Instruments in a DIP-20 package with 20 pins. -40℃~+85℃@(Ta) 100% 10V~16.5V 1MHz Full-Bridge DIP-20 AC-DC Controllers and Regulators ROHS.
PCBKit's library has its KiCad symbol (Regulator_Controller:UCC2895N, from KiCad's library) and its footprint (Package_DIP:DIP-20_W7.62mm, from KiCad's library), ready for a KiCad board. 4 are in stock at JLCPCB (part C701475).
Symbol
Footprint
Pinout
20| Pin | Name | Type |
|---|---|---|
| 1 | EAN | Input |
| 2 | EAOUT | Input/output |
| 3 | RAMP | Input |
| 4 | REF | Output |
| 5 | GND | Power in |
| 6 | SYNC | Input/output |
| 7 | CT | Passive |
| 8 | RT | Passive |
| 9 | DELAB | Passive |
| 10 | DELCD | Passive |
| 11 | ADS | Input |
| 12 | CS | Input |
| 13 | OUTD | Output |
| 14 | OUTC | Output |
| 15 | VDD | Power in |
| 16 | PGND | Power in |
| 17 | OUTB | Output |
| 18 | OUTA | Output |
| 19 | SS/DISB | Passive |
| 20 | EAP | Input |
Parts like it
8UCC28513N
PDIP-20-40℃~+105℃ 1000mW 200kHz 9.7V~18V Boost、Flyback CCM、PWM Modulation Isolation Secondary-Side Feedback PDIP-20 AC-DC Controllers and Regulators ROHSTexas InstrumentsAC-DC Controllers And RegulatorsUCC3895N
PDIP-200℃~+70℃@(TA) 100% 10V~16.5V 1MHz Full-Bridge PDIP-20 AC-DC Controllers and Regulators ROHSTexas InstrumentsAC-DC Controllers And RegulatorsLT1509CN#PBF
PDIP-20Soft start、Overvoltage protection、Undervoltage lockout PDIP-20 AC-DC Controllers and Regulators ROHSAnalog DevicesAC-DC Controllers And RegulatorsUC2875NG4
PDIP-20-25℃~+85℃ 100% 1MHz 2A 9.5V~20V Full-Bridge Non-Isolated Under Voltage Protection、Over Current Protection、Soft-start PDIP-20 AC-DC Controllers and Regulators ROHSTexas InstrumentsAC-DC Controllers And RegulatorsUCC28500N
PDIP-20-40℃~+85℃ 80kHz~120kHz 9.7V~18V PDIP-20 AC-DC Controllers and Regulators ROHSTexas InstrumentsAC-DC Controllers And RegulatorsUCC28511N
PDIP-20-40℃~+105℃ 1W 200kHz 75%、95% 9.7V~18V Boost、Flyback CCM Isolation Over Voltage Protection、Under Voltage Protection、Over Current Protection、Constant Voltage (CV)、Adjustable soft-start、Under-voltage lockout、Slope compensation Secondary-Side Feedback PDIP-20 AC-DC Controllers and Regulators ROHSTexas InstrumentsAC-DC Controllers And RegulatorsUCC38500N
PDIP-200℃~+70℃ 100kHz 1W 9.7V~18V 95% Adjustable soft-start、Under-voltage lockout、Slope compensation Boost CCM PDIP-20 AC-DC Controllers and Regulators ROHSTexas InstrumentsAC-DC Controllers And RegulatorsUCC38501N
PDIP-200℃~+70℃ 100kHz 9.7V~18V PDIP-20 AC-DC Controllers and Regulators ROHSTexas InstrumentsAC-DC Controllers And Regulators
Questions
Is there a KiCad symbol and footprint for the UCC2895N?
Yes. The symbol is Regulator_Controller:UCC2895N and the footprint Package_DIP:DIP-20_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the UCC2895N?
DIP-20, with 20 pins. Its footprint is drawn on this page.
Where is the UCC2895N datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the UCC2895N?
JLCPCB lists it as part C701475, with 4 in stock; the sellers' links on this page open their listings.
What can replace the UCC2895N?
Parts like it in the library: the UCC28513N by Texas Instruments, the UCC3895N by Texas Instruments, the LT1509CN#PBF by Analog Devices and the UC2875NG4 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.