UCC2810N
Texas InstrumentsExtended
0℃~+70℃ 1MHz 49% 8.3V~11V Boost、Flyback、Forward Isolation PDIP-16 AC-DC Controllers and Regulators ROHS
- Part id
- ti/UCC2810N
- Category
- AC DC Controllers And Regulators
- Package
- PDIP-16
- Pins
- 16
- In stock
- 0 at JLCPCB (C2879039)
Overview
The UCC2810N is an AC DC Controllers And Regulator made by Texas Instruments in a PDIP-16 package with 16 pins. 0℃~+70℃ 1MHz 49% 8.3V~11V Boost、Flyback、Forward Isolation PDIP-16 AC-DC Controllers and Regulators ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:UCC2810DWG4, from EasyEDA) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2879039).
Symbol
Footprint
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | SYNC | Unspecified |
| 2 | CT | Unspecified |
| 3 | RT | Unspecified |
| 4 | FB1 | Unspecified |
| 5 | COMP1 | Unspecified |
| 6 | CS1 | Unspecified |
| 7 | OUT1 | Unspecified |
| 8 | GND | Unspecified |
| 9 | PWRGND | Unspecified |
| 10 | OUT2 | Unspecified |
| 11 | CS2 | Unspecified |
| 12 | COMP2 | Unspecified |
| 13 | FB2 | Unspecified |
| 14 | ENABLE2 | Unspecified |
| 15 | REF | Unspecified |
| 16 | VCC | Unspecified |
Parts like it
8SG3525AN
DIP-160℃~+70℃@(Ta) 100Hz~400kHz 49% 8V~35V Push-Pull Under Voltage Protection、Soft Start DIP-16 AC-DC Controllers and Regulators ROHSonsemiAC-DC Controllers And RegulatorsSG3525AN(XBLW)
DIP-160℃~+70℃ 100Hz~400kHz 12mA 2 35V 400mA Built-in Frequency synchronization DIP-16 DC-DC Converters ROHSXBLWAC-DC Controllers And RegulatorsSG3525N
DIP-160℃~+70℃ 100Hz~500kHz 150mA 49% 50mW 8V~35V PWM Modulation Under Voltage Protection、Soft-start、Under-voltage lockout DIP-16 AC-DC Controllers and Regulators ROHSHGSEMIAC-DC Controllers And RegulatorsSG3524N
DIP-160℃~+70℃ 100Hz~300kHz 50mA 8V~40V 90% Non-Isolated Over Current Protection PWM Modulation Push-Pull DIP-16 AC-DC Controllers and Regulators ROHSHGSEMIAC-DC Controllers And RegulatorsTL494N
DIP-16-40℃~+125℃ 2 250mA 40V 5V Built-in DIP-16 DC-DC Converters ROHSHTC Korea TAEJIN TechAC-DC Controllers And RegulatorsUC3846N(XBLW)
DIP-160℃~+70℃ 1000mW 40V 500kHz 500mA Non-Isolated Push-Pull Under Voltage Protection、Soft-start DIP-16 AC-DC Controllers and Regulators ROHSXBLWAC-DC Controllers And RegulatorsSG3524N
PDIP-160℃~+70℃@(TA) 8V~40V Built-in Push-Pull PDIP-16 DC-DC Converters ROHSTexas InstrumentsAC-DC Controllers And RegulatorsUC2846N
PDIP-16-40℃~+85℃ 1000mW 39kHz~47kHz 50% 6.95V~40V Push-Pull Under Voltage Protection、Over Current Protection、Soft Start PDIP-16 AC-DC Controllers and Regulators ROHSTexas InstrumentsAC-DC Controllers And Regulators
Questions
Is there a KiCad symbol and footprint for the UCC2810N?
Yes. The symbol is EasyEDA_Cloud:UCC2810DWG4 and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the UCC2810N?
PDIP-16, with 16 pins. Its footprint is drawn on this page.
Where is the UCC2810N datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the UCC2810N?
JLCPCB lists it as part C2879039, with 0 in stock; the sellers' links on this page open their listings.
What can replace the UCC2810N?
Parts like it in the library: the SG3525AN by onsemi, the SG3525AN(XBLW) by XBLW, the SG3525N by HGSEMI and the SG3524N by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.