Skip to the content
12345678910111213141516

UC2906J

Texas InstrumentsExtended

-40℃~+70℃ 1 1.6mA 5V~40V Lead-Acid Battery Not supported 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、欠压锁定 - Battery Management

Part id
ti/UC2906J
Category
Battery Management
Pins
5
In stock
0 at JLCPCB (C3682495)

Overview

The UC2906J is a battery Management made by Texas Instruments with 16 pins. -40℃~+70℃ 1 1.6mA 5V~40V Lead-Acid Battery Not supported 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、欠压锁定 - Battery Management.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:UC2906J, from EasyEDA) and its footprint (EasyEDA_Cloud:PDIP-16_L19.7-W6.6-P2.54-LS7.6-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3682495).

Symbol

1C/S OUT2C/S-3C/S+4C/L5+VIN6GND7POWER# INDICATE#8OVER-CHARGE TERMINATE9OVER-CHARGE# INDICATE#10STATE LEVEL CONTROL11TRICKLE BIAS12CHARGE ENABLE13VOLTAGE SENSE14COMPENSATION15DRIVER SOURCE16DRIVER SINK
EasyEDA_Cloud:UC2906JFrom EasyEDA

Footprint

12345678910111213141516
EasyEDA_Cloud:PDIP-16_L19.7-W6.6-P2.54-LS7.6-BLFrom EasyEDA

Pinout

16
The pins of the UC2906J
PinNameType
1C/S OUTUnspecified
2C/S-Unspecified
3C/S+Unspecified
4C/LUnspecified
5+VINUnspecified
6GNDUnspecified
7POWER# INDICATE#Unspecified
8OVER-CHARGE TERMINATEUnspecified
9OVER-CHARGE# INDICATE#Unspecified
10STATE LEVEL CONTROLUnspecified
11TRICKLE BIASUnspecified
12CHARGE ENABLEUnspecified
13VOLTAGE SENSEUnspecified
14COMPENSATIONUnspecified
15DRIVER SOURCEUnspecified
16DRIVER SINKUnspecified

Questions

Is there a KiCad symbol and footprint for the UC2906J?

Yes. The symbol is EasyEDA_Cloud:UC2906J and the footprint EasyEDA_Cloud:PDIP-16_L19.7-W6.6-P2.54-LS7.6-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where is the UC2906J datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the UC2906J?

JLCPCB lists it as part C3682495, with 0 in stock; the sellers' links on this page open their listings.